Biscuit Mold
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7323915020 | 15.3% | CN | US | Official Doc |
| 3924102000 | 24.0% | CN | US | Official Doc |
| 7323930035 | 62.0% | CN | US | Official Doc |
| 6912004890 | 19.8% | CN | US | Official Doc |
| 6912004810 | 19.8% | CN | US | Official Doc |
Product Images
AI Analysis
π° BISCUIT MOLD (Cake Pan / Baking Mold)
π HS Code Classification & Duty Strategy | 2026 China-US Trade Rules | Complete Tariff Breakdown
π One: Product Definition: What Exactly is a "Biscuit Mold"?
In the world of international trade, a Biscuit Mold (or Cake Pan) is categorized not just by its function (baking), but strictly by its Material Composition. The material dictates the HS Code and, consequently, the tax burden.
Key Material Categories: 1. Cast Iron/Metal (Non-Stainless): Traditional heavy-duty pans. 2. Stainless Steel / Metal: High-end, corrosion-resistant pans. 3. Plastic / Silicone: Flexible, non-stick, modern kitchenware. 4. Ceramic / Porcelain (or Fallback): Traditional or decorative bakeware.
β οΈ CRITICAL TRADING ALERT:
The difference between 7323.93 (Stainless) and 7323.91 (Cast Iron) can change your tax rate from 62% to 15.3%.
The difference between Plastic and Metal can change your tax from 24% to 62%.
Material Identification is the #1 Rule for Customs.
π¦ Two: HS Code Classification & Tax Detail (2026 US-China Data)
Based on the authoritative 2026 Trade Data, here is the precise breakdown for Biscuit Molds:
| HS Code | Material Type | Category Summary | Total Tax Rate | Tax Structure Breakdown |
|---|---|---|---|---|
| 7323.91.50.20 | Cast Iron / Non-Stainless Metal | Baking Appliance (Heavy Duty) | 15.3% | Base: 5.3% + Add-on: 0% + Sec 122: 10% |
| 3924.10.20.00 | Plastic / Silicone | Kitchen Utensil (Flexible) | 24.0% | Base: 6.5% + Add-on: 7.5% + Sec 122: 10% |
| 7323.93.00.35 | Stainless Steel / Metal | Baking Appliance (Premium) | 62.0% | Base: 2.0% + Add-on: 0% + Sec 122: 10% + Steel/Alu/Copper Add-on: 50% |
| 6912.00.48.90 | Non-Ceramic Fallback | Kitchen Utensil (Ceramic-like fallback) | 19.8% | Base: 9.8% + Add-on: 0% + Sec 122: 10% |
| 6912.00.48.10 | Metal / Silicone (Non-Ceramic) | Non-Ceramic Kitchenware | 19.8% | Base: 9.8% + Add-on: 0% + Sec 122: 10% |
π Deep Dive into Tax Logic:
- Stainless Steel (7323.93.00.35) suffers the highest penalty (62%) due to the "Steel, Aluminum, Copper Products Add-on Tax of 50%" applied on top of base duties. - Cast Iron (7323.91.50.20) is the most tax-efficient metal option at 15.3%, as it avoids the specific 50% steel add-on. - Plastic (3924.10.20.00) carries a moderate 24.0% rate due to Section 122 (10%) + Section 301-like add-ons (7.5%).
π° Three: Tariff Breakdown Explained (The "Why" Behind the Numbers)
π― 1. The Stainless Steel Trap (7323.93.00.35)
- Total Duty: 62.0%
- Why so high?
- Base: 2.0% (Standard for stainless tableware).
- Sec 122: 10.0% (Additional tariff on specific goods).
- The Killer: 50% Add-on Tax specifically targeting Steel, Aluminum, and Copper products.
- Strategy: If your mold is stainless steel, do not ignore this. It is likely the highest cost item in your list.
π― 2. The Cast Iron Advantage (7323.91.50.20)
- Total Duty: 15.3%
- Why lower?
- Base: 5.3%
- Sec 122: 10.0%
- No Extra Add-on: Cast iron is often treated differently than "Stainless Steel" in trade data, avoiding the 50% surcharge.
- Strategy: A powerful argument for suppliers to switch stainless lines to cast iron for US export to save 46.7% in taxes.
π― 3. The Plastic/Silicone Standard (3924.10.20.00)
- Total Duty: 24.0%
- Why moderate?
- Base: 6.5% (Plastic kitchenware).
- Add-on: 7.5% (Section 301 or similar trade measures).
- Sec 122: 10.0%.
- Strategy: Standard for modern bakeware. No hidden 50% traps, but higher than cast iron.
π οΈ Four: Customs Clearance & Operational Advice (Risk-Free Shipping)
β 1. Document Preparation (The "Must-Haves")
| Document | Requirement | Why It Matters |
|---|---|---|
| Material Declaration | Critical | Must explicitly state "Cast Iron," "Stainless Steel," or "Silicone." Vague terms like "Metal" can trigger audits. |
| Product Photos | Close-ups of texture | To prove material type (e.g., rough cast iron vs. shiny stainless vs. flexible silicone). |
| Bill of Materials | Breakdown | If the mold has a silicone coating on steel, declare the dominant material carefully. |
| Commercial Invoice | Clear Description | Use specific terms: "Cast Iron Baking Pan" or "Silicone Mold," NOT generic "Kitchenware." |
β 2. Classification Strategy (The "Golden Rules")
π₯ Rule #1: Material is King.
Stainless Steel = 62% Tax (Avoid if possible, or price accordingly). * Cast Iron = 15.3% Tax (Best option for metal). * Plastic/Silicone = 24.0% Tax* (Good middle ground).π₯ Rule #2: Avoid the "Fallback" Trap.
Codes 6912.00.48.90 and 6912.00.48.10 are "Catch-All" categories. Only use these if the material doesn't fit Cast Iron, Stainless, or Plastic definitions. Using them incorrectly when a specific HS code exists can lead to Re-classification Penalties.
β 3. Special Scenarios
| Scenario | Action | Risk |
|---|---|---|
| Composite Molds (Silicone coating on Metal) | Declare based on Dominant Material or Essential Character. If the metal body is structural, it might still be 73xx. | High risk of being taxed at 62% if steel is dominant. |
| OEM Custom Orders | Provide the buyer's spec sheet. | If the spec says "Stainless" but you ship "Cast Iron" to save tax, you face Fraud charges. |
| Kit Packaging (Mold + Spatula + Mat) | Ship separately or declare as "Set." | Mixed materials in one package complicate classification. Best to declare the mold separately. |
π Five: Market Comparison & Conclusion
| Material | HS Code | Total Tax (China to US) | Verdict |
|---|---|---|---|
| Cast Iron | 7323.91.50.20 |
15.3% | π’ Best Value (Lowest Metal Tax) |
| Plastic/Silicone | 3924.10.20.00 |
24.0% | π‘ Standard (Moderate Tax) |
| Stainless Steel | 7323.93.00.35 |
62.0% | π΄ Avoid (Highest Tax due to Steel Add-on) |
| Other/Fallback | 6912.00.48.x |
19.8% | π‘ Niche (Use only if unsure) |
π Final Strategic Advice:
- Audit your SKU list: Check if you are shipping Stainless Steel molds. If so, you are paying a 62% tariff.
- Material Switch: Consider re-engineering your stainless steel molds to Cast Iron or Enamel-coated Cast Iron (if it falls under Cast Iron rules) to slash taxes from 62% to 15.3%.
- Documentation: Ensure your packing list and invoice explicitly name the material. Ambiguity = Audit = Delay.
- Price Calculation: Always add 24% to 62% to your FOB cost when quoting US customers. Do not quote "Base Duty Only."
π£ Call to Action
π Don't let a 50% steel tax erode your profit margins!
Verify your mold material TODAY. If it's stainless steel, consider the switch to Cast Iron or Silicone. Customs Compliance + Material Optimization = Maximum Profit.
β¨ Precision Classification. Maximum Efficiency. Zero Surprises.
πΌ Your mold, your margin, your success.
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.