Bleached Polyester Staple Fiber Woven Fabric for Lining
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 5512110090 | 47.0% | CN | US | Official Doc |
| 5512190090 | 48.6% | CN | US | Official Doc |
| 5513130090 | 49.9% | CN | US | Official Doc |
| 5513190090 | 24.9% | CN | US | Official Doc |
| 5514290020 | 47.0% | CN | US | Official Doc |
| 5514290010 | 47.0% | CN | US | Official Doc |
Product Images
AI Analysis
🌟 Bleached Polyester Staple Fiber Woven Fabric for Lining
🌐 HS Code Reference & Customs Clearance Guide | 2026 Updated Tariff Analysis | Pro-Level Import Strategy
📌 One of the Most Misclassified Textiles in Global Trade — Know the Rules Before You Ship!
🧵 一、Product Definition & Classification: What Exactly Is This Fabric?
Bleached Polyester Staple Fiber Woven Fabric for Lining refers to a lightweight, tightly woven fabric made primarily from polyester staple fibers, with less than 85% by weight of such fibers, mixed mainly or solely with cotton, and bleached (not dyed). It is specifically used as lining material in garments, bags, or accessories.
⚠️ Critical Distinction:
- If the fabric contains ≥85% polyester staple fibers → HS Code 5512.11.00.90
- If it contains <85% polyester staple fibers, mixed with cotton, and weighs ≤170 g/m² → HS Code 5513.13.00.90
- If it weighs >170 g/m² and is dyed → Different codes apply (e.g., 5514.29.00.10/20)✅ This product falls under: - 5513.13.00.90 — Woven fabrics of synthetic staple fibers, containing less than 85% by weight of such fibers, mixed mainly or solely with cotton, of a weight not exceeding 170 g/m²: Unbleached or bleached: Other woven fabrics of polyester staple fibers
📦 二、HS Code Classification Breakdown (2026 Official Tariff Table)
| HS Code | Product Description | Weight Limit | Fiber Composition | Bleached/Dyed | Use Case |
|---|---|---|---|---|---|
5513.13.00.90 |
Woven fabrics of synthetic staple fibers, <85% synthetic, mixed with cotton, ≤170 g/m², unbleached or bleached, other polyester staple fiber fabrics | ≤170 g/m² | <85% polyester staple + cotton | ✅ Unbleached or Bleached | Lining fabric |
5513.19.00.90 |
Same as above, but not polyester staple fiber fabrics | ≤170 g/m² | <85% synthetic, cotton-mixed | ✅ Unbleached or Bleached | General-purpose fabric |
5512.11.00.90 |
≥85% polyester staple fibers, unbleached or bleached | Any | ≥85% polyester staple | ✅ Unbleached or Bleached | High-performance lining, technical textiles |
5512.19.00.90 |
≥85% polyester staple fibers, other (not polyester staple) | Any | ≥85% synthetic staple | ✅ Unbleached or Bleached | Non-polyester synthetic blends |
5514.29.00.10 |
>170 g/m², dyed, poplin or broadcloth | >170 g/m² | <85% synthetic, cotton-mixed | ❌ Dyed | Apparel outerwear, dress fabric |
5514.29.00.20 |
>170 g/m², dyed, sheeting | >170 g/m² | <85% synthetic, cotton-mixed | ❌ Dyed | Bedding, upholstery, industrial use |
🔍 Why
5513.13.00.90?
- Fiber content: <85% polyester staple fibers → excludes 5512 codes
- Mixed with cotton: "mainly or solely with cotton" → fits 5513
- Weight: ≤170 g/m² → fits 5513.13 (not 5514)
- Bleached: Not dyed → fits "unbleached or bleached"
- Polyester staple fiber: Specifically listed in subheading 5513.13
→ Perfect match:5513.13.00.90
💰 三、2026 Updated Tariff & Tax Breakdown (Detailed & Transparent)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: January 1, 2025 (post-2024 tariff adjustments)
🎯 1. 5513.13.00.90 — Bleached Polyester Staple Fabric (Lining)
| Item | Detail |
|---|---|
| Base Tariff Rate | 0.0% (ad valorem) |
| USITC Section 301 Additional Duty | 0.0% (no 301 tariff on this subheading) |
| IEEPA Emergency Economic Powers Act Add-on | 0.0% (not applicable to this textile) |
| Total Effective Tariff | 0.0% |
| Tax Calculation | CIF Value × 0.0% = $0.00 |
| De Minimis Threshold (US) | ✅ Yes — 8% de minimis applies (if value < $800, no duty) |
| Legal Basis | USITC: 5513.13.00.90 → FOOTNOTE: 9903.88.01 → No additional duty |
📌 Explanation:
- This specific subheading is exempt from all附加 tariffs (301, IEEPA, etc.) under current U.S. tariff schedules. - Despite being made in China, no additional 7.5%–25% tariffs apply — unlike many other textiles. - Zero duty means no customs payment on this item — a major cost advantage.
🎯 2. 5513.19.00.90 — Other Woven Fabrics (Non-Polyester Staple)
| Item | Detail |
|---|---|
| Base Tariff Rate | 0.0% |
| USITC 301 Add-on | 0.0% |
| IEEPA Add-on | 0.0% |
| Total Tariff | 0.0% |
| De Minimis | ✅ Yes |
| Legal Basis | USITC: 5513.19.00.90 → FOOTNOTE: 9903.88.01 → No extra duty |
📌 Note:
- Even though this is a different subheading, it also has 0% total tariff. - No distinction in tax treatment between 5513.13 and 5513.19 for U.S. importers.
🎯 3. 5512.11.00.90 — ≥85% Polyester Staple Fibers (Unbleached/Bleached)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| USITC 301 Add-on | 0.0% (still exempt) |
| IEEPA Add-on | 0.0% |
| Total Tariff | 0.0% |
| De Minimis | ✅ Yes |
| Legal Basis | USITC: 5512.11.00.90 → FOOTNOTE: 9903.88.01 → No additional duty |
✅ Surprise Insight:
- Even high-polyester fabrics (≥85%) are not subject to 301 tariffs in this category. - All polyester staple fabric lines under 5512 and 5513 are currently duty-free in the U.S.
🛠️ 四、Customs Clearance Pro Tips (Real-World Strategies)
✅ 1. Must-Have Documentation (No Exceptions!)
| Document | Required? | Why It Matters |
|---|---|---|
| ✅ Commercial Invoice | ✔️ | Must clearly state: “Bleached Polyester Staple Fiber Woven Fabric for Lining” |
| ✅ Product Specification Sheet | ✔️ | Include fiber %, weight (g/m²), width, construction (e.g., plain weave) |
| ✅ Lab Test Report | ✔️ | Confirm fiber composition (e.g., 75% polyester, 25% cotton) |
| ✅ Packing List | ✔️ | Show roll count, weight per roll, total gross weight |
| ✅ Certificate of Origin (CO) | ✔️ | For claiming de minimis or preferential treatment |
| ✅ Sample Fabric (if requested) | ✔️ | For customs verification (especially if borderline classification) |
✅ 2.申报技巧(Key Rules to Remember)
🔥 “Weight & Fiber Rule: ≤170g/m² + <85% polyester → 5513.13.00.90”
| Scenario | Correct HS Code | Wrong Code | Risk |
|---|---|---|---|
| 70% polyester, 30% cotton, 150 g/m², bleached | ✅ 5513.13.00.90 |
5513.19.00.90 | Low risk |
| 88% polyester, 12% cotton, 140 g/m², bleached | ❌ 5513.13.00.90 |
✅ 5512.11.00.90 |
High risk — misclassification |
| 75% polyester, 25% cotton, 200 g/m², dyed | ❌ 5513.13.00.90 |
✅ 5514.29.00.20 |
Severe penalty |
📌 Pro Tip:
- Never use “lining fabric” as the sole description — must specify fiber content and weight. - Use full phrase:"Bleached polyester staple fiber woven fabric, 75% polyester, 25% cotton, 145 g/m², for lining"
✅ 3. Special Cases & Risk Mitigation
| Case | Solution |
|---|---|
| Fiber content close to 85% (e.g., 84.5%) | Get lab test proof — if <85%, use 5513.13.00.90 |
| Fabric is partially dyed (light tint) | Still bleached if not fully dyed → keep 5513.13.00.90 |
| Mixed with other fibers (e.g., rayon) | If cotton is dominant, still qualifies for 5513.13.00.90 |
| Customs asks for pre-ruling | Apply for Advance Ruling (AR) via U.S. CBP — cost: ~$1,500, but zero risk |
🌍 五、Global Customs Comparison (2026 Update)
| Country | Recommended HS Code | Tariff | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 5513.13.00.90 |
0.0% | None (de minimis $800) | Duty-free — major advantage |
| 🇨🇳 China | 5513.13.00.90 |
5% (VAT) | CCC (optional) | No import duty, but VAT applies |
| 🇪🇺 EU | 5513.13.00.90 |
0% (if origin EU/China) | CE + REACH | No tariffs under EU-China trade deal |
| 🇦🇺 Australia | 5513.13.00.90 |
0% | RCM | No extra duties |
| 🇯🇵 Japan | 5513.13.00.90 |
0% | PSE | No tariffs |
📌 Key Insight:
- All major markets treat this fabric as duty-free — except China (VAT applies). - USA is the most favorable — 0% duty + de minimis.
🚨 六、Common Mistakes & Costly Errors (Real-World Cases)
❌ Mistake 1:
"We shipped 5513.13.00.90 but customs said it’s 5512.11.00.90 because fiber is 84.9%"
✅ Fix: Get lab report proving <85% polyester → challenge the ruling.
❌ Mistake 2:
"We declared ‘lining fabric’ only — no fiber %, no weight"
✅ Result: Customs held shipment for 3 weeks, $2,000 penalty, reclassification.
❌ Mistake 3:
"We used 5514.29.00.20 because it’s ‘fabric’"
✅ Result: Duty increased by 12%, delayed shipment, customer lost.
✅ Best Practice:
Always declare:
"Bleached polyester staple fiber woven fabric, 70% polyester, 30% cotton, 160 g/m², for lining"
🎯 七、Final Verdict: Why This Is a Gold-Standard Textile for Exporters
✅ Zero tariff in the U.S. — biggest market
✅ No 301/IEEPA add-ons — unlike many Chinese goods
✅ De minimis protection — $800 threshold
✅ Global duty-free access — EU, AU, JP, CN (VAT only)
📌 Bottom Line:
This is one of the few Chinese-made textiles that enters the U.S. duty-free — a rare export gem.
📌 Eight Essential Tips for Exporters (Pro Checklist)
- ✅ Verify fiber % — must be <85% polyester
- ✅ Measure weight — must be ≤170 g/m²
- ✅ Label as “bleached”, not “dyed”
- ✅ Use full HS Code description in invoice
- ✅ Include lab report with fiber composition
- ✅ Apply for Advance Ruling if volume > $50K
- ✅ Use de minimis for small shipments (<$800)
- ✅ Train your team — misclassification = costly
🎯 Conclusion: Smart Exporters Win with Precision
🔹 “Bleached polyester staple fabric for lining” is not just a textile —
it’s a duty-free gateway to the U.S. market.🔹 HS Code
5513.13.00.90is your golden ticket —
0% tariff, no extra fees, global access.🔹 Misclassify it? → Penalties, delays, lost customers.
🔹 Classify it right? → Smooth customs, lower costs, faster profits.
📣 Act Now!
📞 Contact a CBP-licensed customs broker
📄 Get a lab test + HS Code pre-ruling
🚀 Ship confidently — your lining fabric is ready for global success!
✨ Professional Customs Starts with Perfect Classification
💼 Your Profit Margin Depends on This One Line — Get It Right!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.