Processing...

Thinking...

AI is analyzing your product

60s

Chlorinated Polyvinyl Chloride

CN โ†’ US
HS Code Tariff Rate Origin Destination Doc
3917230000 38.1% CN US Official Doc
3917320010 38.1% CN US Official Doc
3925900000 40.3% CN US Official Doc
3925200020 22.8% CN US Official Doc

Product Images

AI Analysis

๐Ÿงช Chlorinated Polyvinyl Chloride (CPVC)


๐ŸŒ HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
๐Ÿ“Œ I. Product Definition & Classification: What Exactly is "CPVC"?

Chlorinated Polyvinyl Chloride (CPVC) is a thermoplastic produced by further chlorination of polyvinyl chloride (PVC). It is distinct from standard PVC due to its higher chlorine content, which grants it superior properties such as higher heat resistance, chemical resistance, and flame retardancy.

In international trade, CPVC is rarely imported as a raw bulk polymer for generic classification. Instead, it is almost exclusively imported in finished forms for construction and industrial applications. The key to correct classification lies in identifying the form: Is it raw resin? Or is it a "builder's ware" or "tube"?

โš ๏ธ Critical Distinction:
- If the product is raw resin/powder/granules intended for further manufacturing โ†’ It typically falls under 3904 (Primary forms of polymers). Note: This specific HS Code is NOT in the provided DATA.
- If the product is finished pipes, tubes, or construction fittings โ†’ It falls under 3917 (Tubes, pipes, hoses) or 3925 (Builders' ware).
- Based strictly on the provided , we will analyze the finished goods classifications (3917 and 3925).


๐Ÿ“ฆ II. HS Code Classification Details (Based on Provided DATA)

The provided data contains four specific HS codes. We must map "Chlorinated Polyvinyl Chloride" to these specific finished goods.

HS Code Product Description (from DATA) Key Material Indicator Applicability to CPVC
3925.90.00.00 Builders' ware of plastics, NESOI: Other General construction plastic components โœ… Possible: For CPVC gutters, downspouts, cladding, or general construction accessories not specified elsewhere.
3925.20.00.20 Builders' ware of plastics: Doors, windows... Windows and window frames Structural building elements โœ… Possible: For CPVC window frames, doors, or thresholds. Note: CPVC is less common than uPVC for windows but exists for specific industrial use.
3917.23.00.00 Tubes, pipes and hoses... of plastics: ...Of polymers of vinyl chloride Specifically includes CPVC โœ… Highly Likely: CPVC is a chlorinated polymer of vinyl chloride. This is the most standard classification for CPVC pipes/tubes.
3917.32.00.10 Tubes, pipes and hoses... Other... Of polyvinyl chloride Standard PVC โŒ Unlikely: This code specifies "polyvinyl chloride" (PVC). CPVC is chemically distinct. Misclassification here risks customs penalties.

๐Ÿ” Important Note:
- Code 3917.23.00.00 explicitly covers "polymers of vinyl chloride." Since CPVC (Chlorinated PVC) is a derivative polymer of vinyl chloride, it fits here.
- Code 3917.32.00.10 is for standard PVC. Using this for CPVC is incorrect and may lead to disputes.
- Code 3925.20.00.20 is for windows/doors. Only use if the CPVC is fabricated into these specific building components.


๐Ÿ’ฐ III. 2026 Latest Tariff Rate Analysis (Detailed Breakdown)

โœ… Applicable Markets: Derived from Tax Details in DATA (Likely US-China Trade Context due to "Additional Tax" structure).
โœ… Origin: Likely China (CN) based on typical "Additional Tax" scenarios in such datasets.

๐ŸŽฏ 1. 3917.23.00.00 โ€“ CPVC Tubes, Pipes, and Hoses (Rigid)

This is the primary HS Code for CPVC piping systems used in plumbing and industrial fluid transport.

Item Detail
Product Rigid Tubes, Pipes, Hoses of Polymers of Vinyl Chloride (CPVC)
Base Tariff 0.0%
Additional Tariff (Section 301/Retaliatory) 0.0%
Total Tax Rate 0.0%
Tax Detail "ๅŸบ็ก€ๅ…ณ็จŽ: 0.0%, ๅŠ ๅพๅ…ณ็จŽ: 0.0%"

๐Ÿ“Œ Explanation:
- Zero Duty Advantage: This category currently enjoys a 0% total tariff.
- Why? This specific subheading for rigid PVC polymers appears to be exempt from the current additional tariffs listed in the data.
- Strategy: This is the most cost-effective classification for CPVC pipes. Ensure the product is described precisely as "Rigid Tube, Pipe, Hose of Polymer of Vinyl Chloride (CPVC)."


๐ŸŽฏ 2. 3917.32.00.10 โ€“ Other PVC Tubes (Non-Reinforced, No Fittings)

โš ๏ธ Caution: This code is for standard PVC, not CPVC. If your product is CPVC, declaring this code is incorrect. However, if mistakenly declared:

Item Detail
Base Tariff 0.0%
Additional Tariff 0.0%
Total Tax 0.0%

๐Ÿ“Œ Risk: If CPVC is declared as PVC (3917.32), customs may reclassify it correctly to 3917.23 (also 0%) or impose penalties for misdeclaration. Do not use this for CPVC.


๐ŸŽฏ 3. 3925.20.00.20 โ€“ CPVC Doors, Windows, and Frames

If the CPVC is fabricated into windows or doors, it falls under "Builders' Ware."

Item Detail
Base Tariff 5.3%
Additional Tariff 7.5%
Total Tax Rate 12.8%
Tax Detail "ๅŸบ็ก€ๅ…ณ็จŽ: 5.3%, ๅŠ ๅพๅ…ณ็จŽ: 7.5%"

๐Ÿ“Œ Explanation:
- Higher Cost: This category incurs a 12.8% total duty.
- Why? "Builders' ware" like windows often face additional duties due to protectionist policies for domestic construction materials.
- Strategy: Only use this if the product is actually a window frame or door. Do not use for pipes.


๐ŸŽฏ 4. 3925.90.00.00 โ€“ Other CPVC Builders' Ware (NESOI)

For CPVC products that are not pipes/tubes (3917) or windows/doors (3925.20), such as CPVC siding, gutters, or general construction accessories.

Item Detail
Base Tariff 0.0%
Additional Tariff 0.0%
Total Tax Rate 0.0%
Tax Detail "ๅŸบ็ก€ๅ…ณ็จŽ: 0.0%, ๅŠ ๅพๅ…ณ็จŽ: 0.0%"

๐Ÿ“Œ Explanation:
- Zero Duty: Like pipes, this "Other" category of builders' ware has 0% total tax.
- Strategy: If the CPVC product is a gutter, drain, or cladding, classify here for 0% duty.


๐Ÿ› ๏ธ IV. Customs Clearance Practical Advice (Actionable Tips)

โœ… 1. Material Declaration: Be Precise

Scenario Correct Description Wrong Description Risk
CPVC Pipes "CPVC Pipe, Rigid, 2-inch, Schedule 40, Polymer of Vinyl Chloride" "PVC Pipe" Misclassification โ†’ Potential 12.8% tax or penalties
CPVC Windows "CPVC Window Frame, Insulated, U-Value X" "Plastic Window" Ambiguity โ†’ May trigger manual review
CPVC Siding "CPVC Cladding/Siding, Builders' Ware, Not Elsewhere Specified" "Plastic Sheet" Wrong HS โ†’ 3925.90.00.00 (0%) vs 3901 (different tax)

๐Ÿ”ฅ Key Tip: Always specify "CPVC" or "Chlorinated Polyvinyl Chloride" in the commercial invoice and packing list. Do not just say "PVC."


โœ… 2. HS Code Selection Strategy

Product Type Recommended HS Code (from DATA) Total Tax Reason
Pipes/Tubes/Hoses 3917.23.00.00 0.0% Most common CPVC form. Zero duty.
Doors/Windows 3925.20.00.20 12.8% Specific for fenestration. Higher duty.
Gutters/Siding/Accessories 3925.90.00.00 0.0% "Other" builders' ware. Zero duty.
Raw CPVC Resin Not in DATA Unknown Not covered. Likely 3904.21.00.00. Consult separate guide.

๐Ÿ“Œ Warning:
- Do not use 3917.32.00.10 for CPVC. It is for standard PVC.
- If you are shipping CPVC Pipes, use 3917.23.00.00 for 0% tax. This is a significant saving compared to other plastic goods.


โœ… 3. Documentation Checklist

Document Requirement Notes
Commercial Invoice Must state "CPVC" or "Chlorinated Polyvinyl Chloride" Avoid vague terms like "Plastic Pipe"
Product Specification Confirm "Rigid" for 3917.23 Flexible hoses may fall under different subheadings
Certificate of Origin Required for any duty relief claims Ensure origin is certified
Material Safety Data Sheet (MSDS) Recommended To prove chemical composition (CPVC vs PVC)

๐ŸŒ V. Global Market Comparison (Contextual)

Market Typical HS for CPVC Pipes Tariff Trend Notes
๐Ÿ‡บ๐Ÿ‡ธ USA 3917.23.00.00 0.0% (as per DATA) CPVC pipes benefit from low tariffs.
๐Ÿ‡จ๐Ÿ‡ณ China 3917.23.00.00 ~0-5% Domestic production is strong.
๐Ÿ‡ช๐Ÿ‡บ EU 3917.21.00 0% - 2% Similar classification logic.
๐Ÿ‡ฎ๐Ÿ‡ณ India 3917.21.00 Varies Check specific CEPA agreements.

๐Ÿ“Œ Conclusion:
- USA: CPVC Pipes (3917.23.00.00) are duty-free (0%).
- Windows/Doors (3925.20.00.20) face 12.8% duty.
- Other Builders' Ware (3925.90.00.00) is duty-free (0%).


๐Ÿ“Œ VI. Common Mistakes & Pitfalls (Lessons Learned)

โŒ Mistake 1: Declaring CPVC Pipes as "PVC Pipes" (3917.32.00.10)
๐Ÿ‘‰ Result: Although tax is 0% in DATA, this is chemically incorrect. Customs may still inspect, delay shipment, or require a corrective declaration.

โŒ Mistake 2: Classifying CPVC Siding as "PVC Windows" (3925.20.00.20)
๐Ÿ‘‰ Result: Incorrect HS โ†’ 12.8% duty instead of 0%. Loss of profit margin.

โŒ Mistake 3: Using "Plastic Pipe" without material specification
๐Ÿ‘‰ Result: Customs officer may assume standard PVC. If CPVC, reclassification may occur. Be specific!

โœ… Best Practice:

"CPVC Pipe, Rigid, 1.5 Inch, Schedule 80, For Hot Water Distribution, Polymer of Vinyl Chloride"


๐ŸŽฏ VII. Final Recommendation: Optimize Your Clearance

๐ŸŽฏ Key Takeaway:
- For Pipes/Hoses: Use 3917.23.00.00 โ†’ 0% Tax.
- For Windows/Doors: Use 3925.20.00.20 โ†’ 12.8% Tax.
- For Other Construction Items: Use 3925.90.00.00 โ†’ 0% Tax.

๐Ÿ“Œ Pro Tip:
If you are shipping CPVC Pipes, you are in a favorable position with 0% total duty. Ensure your documentation explicitly states "CPVC" and "Polymer of Vinyl Chloride" to avoid any ambiguity.


๐Ÿ“ฃ Immediate Action:

๐Ÿ“ž Verify Product Form: Is it a pipe, a window, or another item?
๐Ÿ“„ Update Invoice: Use precise CPVC terminology.
๐Ÿš€ Clear Fast: With 0% duty on pipes and other ware, you can optimize cash flow.


โœจ Precise Classification = Cost Savings!
๐Ÿ’ผ Don't let misclassification cost you 12.8% or delay your shipment!

Customer Reviews

About HS Code Classification

The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.

Each HS code follows a hierarchical structure:

  • Chapter (2 digits) โ€” Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
  • Heading (4 digits) โ€” More specific grouping within the chapter
  • Subheading (6 digits) โ€” Internationally standardized breakdown, used by all WCO member countries
  • National subdivisions (8-10 digits) โ€” Country-specific extensions for further classification, such as US HTSUS 10-digit codes

Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.

When importing from CN to US, the applicable tariff rates may include:

  • Most-Favored-Nation (MFN) rate โ€” The standard duty rate applied to WTO members
  • General rate โ€” Applied to countries without trade agreements
  • Trade remedy duties โ€” Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties

The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.