Clothing Zipper
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 9607190020 | 48.0% | CN | US | Official Doc |
| 9607190040 | 48.0% | CN | US | Official Doc |
AI Analysis
𧡠Clothing Zipper (Slide Fasteners)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Entry Strategy π I. Product Definition: What Exactly is a "Clothing Zipper"?
In international trade, "Clothing Zipper" generally falls under the category of Slide Fasteners. However, the specific HS Code classification depends heavily on the material of the chain and the type of attachment. For the most common types found in apparel (jackets, jeans, bags), the classification typically points to Chapter 96.
The key distinction lies in the chain composition: 1. Molded Teeth Chain: Teeth are formed directly from plastic (Polyamide/PA, PVC, or ABS). 2. Coil Chain: Made from continuous plastic filament (Polyester/Polyamide) wound into a spiral. 3. Metal Teeth: (Not included in the provided data below, but generally HS 9607.11 or 9607.19.90 depending on plating). 4. Interlocking Teeth (Non-plastic): Not applicable to the specific data provided.
Based on the provided <DATA>, we are focusing specifically on Plastic Chain variations.
π¦ II. HS Code Classification Details (Based on Provided Data)
The following HS Codes are derived strictly from the provided JSON data. These codes specifically cover Slide Fasteners with Plastic Chains.
| HS Code | Product Description | Chain Type Detail | Common Application |
|---|---|---|---|
| 9607.19.00.20 | Slide Fasteners: Other | Fitted with chain scoops of plastic | Molding-in plastic sliders onto pre-formed plastic chain segments; often used in lower-cost garments or accessories. |
| 9607.19.00.40 | Slide Fasteners: Other | Fitted with continuous plastic filament | Coil zippers (e.g., polyester or nylon coil). Very common in jackets, backpacks, and sportswear. |
π Critical Distinction:
- Both codes fall under 9607.19 ("Other" slide fasteners), implying they are not metal teeth zippers (which would be 9607.11) and not textile tape-only assemblies without specific plastic chain definitions.
- 9607.19.00.20 is specific to "chain scoops" (molded plastic teeth).
- 9607.19.00.40 is specific to "continuous filament" (coil zippers).
π° III. 2026 Tariff Rate Breakdown (Detailed Tax Clauses)
β Applicable Data Source: Provided
<DATA>JSON
β Total Tax Rate: 0.0% for both HS Codes
β Tax Composition: Base Tariff + Supplementary Tariff
π― 1. 9607.19.00.20 ββ Slide Fasteners (Plastic Chain Scoops)
| Item | Content |
|---|---|
| Product | Slide fasteners: Other: Fitted with chain scoops of plastic |
| HS Code | 9607.19.00.20 |
| Base Tariff | 0.0% |
| Supplementary Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Detail | εΊη‘ε
³η¨: 0.0%, ε εΎε
³η¨: 0.0% |
π Explanation:
- The provided data explicitly states that for this specific sub-heading, both the basic customs duty and any additional/supplementary tariffs (such as Section 301 tariffs in the US or similar retaliatory tariffs in other jurisdictions, if applicable to the origin) are 0.0%.
- Zero Duty Advantage: This makes plastic chain scoop zippers highly competitive from a cost-perspective regarding import duties.
π― 2. 9607.19.00.40 ββ Slide Fasteners (Continuous Plastic Filament)
| Item | Content |
|---|---|
| Product | Slide fasteners: Other: Fitted with continuous plastic filament |
| HS Code | 9607.19.00.40 |
| Base Tariff | 0.0% |
| Supplementary Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Detail | εΊη‘ε
³η¨: 0.0%, ε εΎε
³η¨: 0.0% |
π Explanation:
- Similar to the above, the coil zipper variant (continuous plastic filament) also enjoys a 0.0% total tax rate according to the provided dataset.
- Cost Efficiency: Both plastic zipper types are tax-exempt in this specific tariff scenario, simplifying cost calculations for exporters.
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfalls)
β 1. Documentation Checklist (Essential for Clearance)
| Document | Requirement | Purpose |
|---|---|---|
| Commercial Invoice | Must clearly state "Slide Fasteners" or "Zippers" | Avoid misdeclaration as "Textile Parts" (which may have different rates). |
| Product Specification Sheet | Detail: Chain material (Plastic/PA/PVC), Chain type (Scoop vs. Coil), Slider material (Metal/Plastic) | Crucial for distinguishing between 9607.19.00.20 and 9607.19.00.40. |
| Material Certificate | Confirm plastic composition | To prove it is not metal (which would change HS code to 9607.11/9607.19.90). |
| Origin Certificate | If claiming preferential rates (if any exist in broader context) | Verify country of origin to ensure tax rates apply correctly. |
β 2. Declaration Tips (Key Mnemonics)
π₯ "Material Defines Code, Chain Type Defines Subcode"
| Scenario | Correct HS Code | Common Mistake |
|---|---|---|
| Coil Zipper (Nylon/Polyester spiral) | 9607.19.00.40 |
Misclassified as metal zipper β Wrong tax rate. |
| Molded Plastic Zipper (ABS/PA teeth) | 9607.19.00.20 |
Misclassified as "Textile Fastener" β Delays. |
| Metal Tooth Zipper | Not in provided data | Do not use 9607.19.00.20/40. Use 9607.11/9607.19.90. |
| Zipper with Plastic Teeth but Metal Slider | 9607.19.00.20 or .40 |
The chain material dictates the code, not the slider. |
β 3. Special Considerations
| Situation | Handling Advice |
|---|---|
| Mixed Containers | If importing both metal and plastic zippers, declare separately. Mixing them can lead to incorrect tax assessment if not itemized. |
| "Zipper" vs. "Fastener" | Use precise terminology. "Clothing Zipper" is acceptable, but "Slide Fastener" is the formal HS term. |
| Plastic Composition | Ensure the "plastic" is indeed the chain-forming material. If the chain is textile (e.g., cotton tape only) with plastic coils, it may still fall under 9607.19.00.40, but verification is key. |
| De Minimis | While the tax rate is 0%, ensure the declaration value is accurate to avoid penalties for undervaluation, even if duty is zero. |
π V. Global Market Overview (2026 Context)
| Region | Recommended HS Code | Tariff Rate (Based on Data) | Notes |
|---|---|---|---|
| United States | 9607.19.00.20 / .40 |
0.0% | Per provided data. Note: Always verify with USITC for any recent Section 301 updates not reflected in this specific JSON snapshot. |
| European Union | 9607.19 |
Varies (Often 0-6.5%) | EU uses 8-digit TARIC codes. Check local TARIC for precise duty. |
| China | 9607.19 |
Varies | Import duties apply. Export rebates may be available. |
| ASEAN | 9607.19 |
Varies | CEPT schemes may apply for intra-ASEAN trade. |
π Conclusion:
- According to the provided<DATA>, plastic-chain slide fasteners carry a 0.0% total tax rate.
- This is a significant advantage for exporters, as many textile accessories face higher duties.
- Accuracy is critical: Misclassifying a plastic zipper as a metal one (or vice versa) can lead to compliance issues, even if the tariff difference is currently zero.
π VI. Common Errors & Pitfalls (Blood Lessons)
β Error 1: Declaring "Plastic Zipper" under HS 9607.11 (Metal Teeth)
π Consequence: Incorrect Declaration. Customs may audit, leading to delays, fines, or retroactive tax assessments if metal was actually intended or if the code interpretation is strict.
β Error 2: Not specifying "Continuous Filament" vs. "Chain Scoops"
π Consequence: Ambiguity. While the tax rate might be the same (0.0%), accurate description ensures smooth clearance and avoids questions about product nature.
β Error 3: Assuming "Zipper" = "Textile Product"
π Consequence: Wrong Chapter. Zippers are in Chapter 96, not Chapter 60-63 (Textiles). Misclassification can trigger different regulatory requirements.
β Correct Practice:
"Plastic Slide Fastener, Nylon Coil Chain, Metal Slider, 5-inch, Model XYZ, for Outdoor Jacket"
HS Code:9607.19.00.40
π― VII. Conclusion: Precision in Classification, Zero Duty Advantage
π― Key Takeaway:
πΉ Plastic Zippers = HS 9607.19
πΉ Coil Type = 9607.19.00.40
πΉ Molded Scoop Type = 9607.19.00.20
πΉ Total Tax = 0.0% (Per Provided Data)
π― Action Plan:
1. Verify Chain Type: Is it a coil (filament) or molded scoop?
2. Select Correct 10-Digit HS Code: Use the table above.
3. Declare Accurately: Include material details in the invoice.
4. Confirm with Customs: Always validate with local customs brokers, as tariffs can change outside the provided snapshot.
π Pro Tip:
Even with 0.0% tax, accurate HS coding is vital for statistics, quotas, and anti-dumping investigations. Plastic fasteners are sometimes subject to specific trade remedies in certain jurisdictions. Always stay updated!
π£ Immediate Action:
π Contact your customs broker with the product specs.
π Ensure your ERP system is mapped to9607.19.00.20or.40.
πΌ Keep material certificates on file for audit readiness.
β¨ Professional Clearance Starts with Precise Classification!
πΌ Your every dollar saved is worth calculating!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.