Coated Paper Gasket Roll
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4811512010 | 35.0% | CN | US | Official Doc |
| 4811516000 | 35.0% | CN | US | Official Doc |
| 4810131900 | 35.0% | CN | US | Official Doc |
| 4810132090 | 35.0% | CN | US | Official Doc |
| 4811596000 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
π Coated Paper Gasket Roll
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: Do You Really Understand "Coated Paper Gasket Roll"?
A "Coated Paper Gasket Roll" typically refers to rolls of paper-based materials that have undergone surface coating (such as plastic, resin, or adhesive layers) to enhance durability, moisture resistance, or sealing properties. These are often used as raw materials for manufacturing gaskets, seals, or packaging substrates.
In international trade, classification hinges on three key factors: 1. Material: Paper base (e.g., coated paper, kraft paper). 2. Form: Rolls (rolls are distinct from cut sheets). 3. Coating/Processing: Whether the coating is plastic-based, resin-based, or other, and if it changes the fundamental character of the paper.
β οΈ Key Distinction:
- If the paper is coated with plastic/resin for packaging or general industrial use, it often falls under Chapter 48 (Paper and Paperboard).
- If it is specifically designed as a gasket and meets rubber/plastic gasket criteria, it might fall under Chapter 84 or 85, but paper-based gaskets are overwhelmingly classified under Chapter 48 unless they are composite materials with significant non-paper components.
- Crucial Point: The term "Gasket" in the product name does not automatically place it in Chapter 84 (Machinery) if the material is primarily paper. The material composition dictates the chapter.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, the most likely HS Codes for "Coated Paper Gasket Roll" are as follows. All listed codes carry a Total Tax Rate of 35.0% (0% Base + 25% Section 301 + 10% IEEPA).
| HS Code | Product Description | Application Scenario | Key Classification Logic |
|---|---|---|---|
4811.51.20.10 |
Coated Paper Rolls, Format: Roll, Material: Coated Paper, Inferred Use: Beverage Container Base | Coated paper rolls intended for packaging or container substrates | Inferred Use: If the coating and material suggest use as a base for beverage containers, this code applies. |
4811.51.60.00 |
Coated Paper Rolls, Coating & Classification Consistent, Roll Form, No Obvious Conflict | General coated paper rolls for non-specific industrial uses | General Coated Paper: Fits standard coated paper rolls without specific end-use restrictions. |
4810.13.19.00 |
Coated Paper Rolls, Coating Matches Material, Roll Matches Form, Inferred for Printing/Writing | Coated paper rolls suitable for printing or writing applications | Printing/Writing Use: If the coating is for aesthetic/printing purposes and not structural sealing. |
4810.13.20.90 |
Coated Paper Rolls, Coating Matches Material, Roll Matches Form, Fallback Category | Coated paper rolls not fitting specific sub-categories | Fallback/Other: Used if the specific type doesn't match other 4810 sub-headings. |
4811.59.60.00 |
Coated Kraft Paper Rolls, Material: Kraft Paper, Form: Roll, Use: Coated, Matches Plastic-Coated Paper Product Features | Coated kraft paper rolls for industrial packaging or gasket substrate | Kraft Paper Specific: Specifically for coated kraft paper, often used in heavy-duty applications like gaskets or liners. |
π Important Note:
- All five codes above are paper-based and rolled.
- The choice depends on the exact coating material (plastic vs. resin) and the intended end-use (beverage container vs. general industrial vs. printing).
- "Gasket" Function: If the paper is coated to be cut into gaskets, it is still considered a paper product (Chapter 48) unless it is a composite article where the paper is merely a backing for rubber/plastic (which would then be classified under the rubber/plastic chapter). However, the provided data exclusively points to Chapter 48 codes.
π° III. 2026 Latest Tariff Rate Details (Including Additional Taxes, Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: From November 10, 2025 (including subsequent imports)
π― 1. All Listed HS Codes (4811.51.20.10, 4811.51.60.00, 4810.13.19.00, 4810.13.20.90, 4811.59.60.00)
| Item | Content |
|---|---|
| Base Tariff Rate | 0% (ad valorem) |
| Section 301 Additional Tariff | +25% (USITC Footnote) |
| IEEPA Additional Tariff (Section 122/Other) | +10% (Against Chinese Products) |
| Total Tax Rate | 35.0% |
| Tax Calculation | CIF Value Γ 35% |
| De Minimis Eligibility | β Not Eligible (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:[Specific Code] β FOOTNOTE:9903.88.01 |
π Explanation:
- "Section 301 Additional Tariff 25%": Imposed under the U.S. Trade Act of 1974, Section 301, against certain Chinese goods.
- "Section 122 Tariff 10%" (or IEEPA 10%): Refers to additional tariffs imposed under the International Emergency Economic Powers Act (IEEPA) or specific executive orders targeting Chinese imports.
- Total 35%: This is a high tariff rate. Importers must factor this into their landed cost calculations.
- No De Minimis: Packages under $800 (de minimis) do not qualify for exemption. This is critical for small business shipments.
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance Guide)
β 1. Required Documentation Checklist (All Mandatory)
| Document | Must Provide | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Details: Paper grade, coating type (plastic/resin), thickness, roll width, roll length, weight. |
| β Material Composition Statement | βοΈ | Explicitly state: "Paper base + [Coating Material]". If >50% paper by weight/value, Chapter 48 is likely. |
| β Product Photos (Including Label) | βοΈ | Clear images of the roll, end-cut showing layers, and any labeling indicating "Coated Paper" or "Gasket Material". |
| β Third-Party Test Report | βοΈ | If claiming specific use (e.g., food contact for beverage containers), provide FDA or relevant compliance docs. |
| β Commercial Invoice | βοΈ | Clearly describe as "Coated Paper Rolls" or "Coated Paper for Gasket Manufacturing". Avoid vague terms like "Gasket" alone. |
| β Packing List | βοΈ | Specify roll dimensions, gross/net weight, and number of rolls. |
| β Certificate of Origin (CO) | βοΈ | To confirm Chinese origin for tariff calculation. |
β 2. Declaration Tips (Key Mnemonics)
π₯ "Coating Type Defines Code, End-Use Matters, Don't Hide the Paper!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Coated paper for beverage container base | 4811.51.20.10 |
Declare as "Gasket" β Risk of misclassification |
| General coated paper roll (no specific use) | 4811.51.60.00 |
Declare as "Packaging Material" without code |
| Coated paper for printing | 4810.13.19.00 |
Declare as "Industrial Roll" |
| Coated Kraft Paper roll | 4811.59.60.00 |
Declare as generic "Paper Roll" |
| Composite Gasket (Rubber + Paper) | Not Listed Here β Likely Chapter 84/85 | Force into Chapter 48 β High risk of seizure/fine |
π Critical Warning:
- If the product is a composite gasket where paper is just a liner and the primary function comes from rubber/plastic, it may NOT belong in Chapter 48. However, the provided data only includes Chapter 48 codes. If it is indeed a rubber gasket with paper backing, do not use these codes.
- For purely paper-based coated rolls, ensure the description emphasizes "Coated Paper" rather than just "Gasket".
β 3. Special Cases
| Scenario | Handling Advice |
|---|---|
| OEM Custom Coating | Provide client order + coating formula/specs to justify specific HS Code. |
| Food-Grade Coating | If used for beverage containers, provide FDA compliance docs to support 4811.51.20.10. |
| Mixed Shipment (Paper Rolls + Finished Gaskets) | Split Declaration: Paper rolls under Chapter 48, Finished Gaskets under Chapter 84/85 or 39. Do not combine. |
| Small Samples (Under $800) | β No Exemption: The 35% tax still applies. De minimis does not apply to Section 301/IEEPA goods. |
π V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 4811.51.60.00 (General) |
35% (0% + 25% + 10%) | None (unless food contact) | Highest Cost: 35% total. |
| π¨π³ China | 4811.51.60.00 |
5% - 10% (Import Duty) | N/A | No additional US-style tariffs. |
| πͺπΊ EU | 4811.51.60.00 |
6.5% (Standard) | REACH Compliance | No Section 301/IEEPA equivalent. |
| π¬π§ UK | 4811.51.60.00 |
6.5% (Standard) | UKCA (if applicable) | Post-Brexit tariffs apply. |
| π―π΅ Japan | 4811.51.60.00 |
3.8% (Standard) | JIS Standards (if needed) | Low duty, but strict customs inspection. |
π Conclusion:
- USA is the most challenging market due to the 35% total tariff.
- EU, UK, Japan have significantly lower duties but may have stricter environmental or chemical regulations (REACH, etc.).
- Cost Impact: For a $10,000 shipment, the US duty is $3,500, compared to ~$650 in the EU. This drastically affects pricing strategy.
π VI. Common Mistakes & Pitfall Avoidance (Blood & Tears Lessons)
β Mistake 1: Declaring "Coated Paper Gasket Roll" as "Finished Gaskets" (Chapter 84)
π Consequence: If the paper is the primary component, this is misclassification β Penalties + Back Taxes.
π Fix: Use Chapter 48 codes (4811.xx or 4810.xx).
β Mistake 2: Claiming "De Minimis Exemption" for shipments under $800
π Consequence: US Customs will not exempt Section 301/IEEPA goods β 35% Tax Applied β Delays & Confusion.
π Fix: Declare accurately and pay the 35% tax. Do not rely on de minimis.
β Mistake 3: Vague Description: "Paper Roll"
π Consequence: Customs may assign a default higher tariff code or require extensive documentation β Delays.
π Fix: Be specific: "Coated Paper Roll, Plastic-Coated, for Gasket Manufacturing, Roll Width 1000mm."
β Mistake 4: Ignoring Coating Material
π Consequence: Different coatings (plastic vs. resin) may fall under different sub-headings. Misclassification leads to fines.
π Fix: Provide MSDS or coating specification sheets to prove material composition.
β Correct Practice:
"Coated Paper Roll, 50 Micron Base Paper, Plastic-Coated, 1200mm Width, 500m Length, For Industrial Gasket Use, HS Code 4811.51.60.00, Origin: China"
π― VII. Conclusion: Professional Declaration Saves Money!
π― Remember the Mnemonic:
πΉ "Coated Paper is Paper, Not Finished Gasket!"
πΉ "USA 35% Tax, De Minimis No Way!"
πΉ "HS Code Determines Cost, Declaration Must Be Clear!"
π Pro Tip:
If your coated paper rolls are intended for food contact (e.g., beverage containers), ensure you have FDA compliance documents ready. If they are not for food contact, clearly state "Non-Food Contact" to avoid unnecessary food-related scrutiny.
π£ Immediate Action:
π Contact a licensed US Customs Broker + Provide Product Specs + Request Advance Ruling if unsure about Chapter 48 vs. Chapter 84.
π Let your coated paper rolls clear smoothly, control costs, and maximize profits!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Every Dollar of Duty Matters!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.