Based on the strict constraints of the provided <DATA> (which contains only Porcelain/China and Iron/Steel tableware data), here is the classification analysis and clearance guide for a Coffee Dosing Cup.

⚠️ CRITICAL LIMITATION NOTE: The provided data does not contain HS Codes for: 1. Plastic/Metal (non-steel) / Glass dosing cups (common materials). 2. Ceramic (non-porcelain) if the material is specifically "Earthenware" or "Stoneware" (though data includes a "Ceramic other than porcelain" category).

If your Coffee Dosing Cup is made of Plastic, Glass, or Stainless Steel (non-porcelain), the provided <DATA> is insufficient for accurate classification, and you must refer to other HS codes (e.g., 3924, 7013, 7323.99).

However, if your Coffee Dosing Cup is made of Porcelain/China (common for high-end barista tools) or Iron/Steel, the following classification applies strictly based on the provided <DATA>.

☕ Coffee Dosing Cup: HS Code Classification & Clearance Guide (US Market)

Strictly based on the provided Data | 2026 Tariff Analysis

🚨 High Alert: Coffee Dosing Cups are frequently subject to "Section 301" punitive tariffs. If made of Iron/Steel, the total tax burden can exceed 78% due to specific steel/copper/aluminum surcharges!

📦 1. Material-Based Classification Matrix

How to determine your HS Code based on the physical composition of the cup.

💰 2. Tax Rate Deep Dive (US Imports)

Detailed breakdown of the Base Tariff + Added Tariff (Section 301/Special) for each scenario.

🏺 Scenario A: Porcelain/China Dosing Cup

Most common for "Ceramic" dosing cups. - HS Code: 6911.10.80.10 (Food Contact) or 6911.10.80.90 (Other) - Tax Structure: - Base Tariff: 20.8% - Added Tariff (Section 301): 7.5% - Total Tax: 28.3% - 💡 Clearance Logic: - The "7.5%" is an additional duty levied on specific Chinese goods. - De Minimis: If shipping via courier (e.g., $800 limit for individuals), be aware that these are usually exempt for de minimis, but commercial shipments face this 28.3% immediately. - Food Contact: Ensure the product description explicitly states "Suitable for food or drink contact" to avoid re-classification disputes.

⚙️ Scenario B: Iron/Steel Dosing Cup (The Danger Zone)

Common for barista "dosing cups" made of stainless steel or aluminum. - HS Code: 7323.99.90.30 (Iron/Steel, Food Contact) - Base Tariff: 3.4% - Added Tariff (Section 301 + Steel/Al/Cu): 25.0% + 50.0% (Total added) - Total Tax: 78.4% 🚨 - HS Code: 7323.93.00.60 (Stainless Steel, Kitchen Ware) - Base Tariff: 2.0% - Added Tariff: 0.0% (Base) + 50.0% (Steel/Al/Cu Surcharge) - Total Tax: 52.0% 🚨

⚠️ CRITICAL WARNING: If your coffee dosing cup is made of Stainless Steel, you face a 50% "Steel, Aluminum, Copper Products" surcharge on top of the base rate. - 7323.99.90.30 hits you with 78.4% total tax (3.4% Base + 25% + 50% Surcharge). - 7323.93.00.60 hits you with 52.0% total tax (2.0% Base + 50% Surcharge). This makes steel dosing cups extremely expensive to import into the US commercially.

🏺 Scenario C: Non-Porcelain Ceramic Dosing Cup

E.g., Stoneware, Earthenware. - HS Code: 6912.00.48.10 (Food Contact) - Base Tariff: 9.8% - Added Tariff: 0.0% - Total Tax: 9.8% ✅ - Note: This is the most economical classification if the cup is ceramic but not porcelain (e.g., "Other Ceramic").

🛠️ 3. Clearance Strategy & Operational Advice

✅ 1. Material Declaration is Key

• Do NOT simply declare "Coffee Cup."
• Must Declare: "Porcelain Coffee Dosing Cup" vs. "Stainless Steel Coffee Dosing Cup."
• Why? Switching from Porcelain (28.3%) to Steel (78.4%) increases your cost by ~50 percentage points instantly.

✅ 2. Avoiding the "Steel/Copper/Aluminum" Surcharge

• If your dosing cup is Stainless Steel:
  • Check if it falls under 7323.93.00.60 (Cooking/Kitchen Ware) or 7323.99.90.30 (Other).
  • Action: Verify if the product can be legally classified as "Not for kitchen use" (e.g., a weighing tool accessory). If it is strictly a "tool" and not "kitchenware," it might escape the 50% surcharge, but this requires strong technical justification.
  • Risk: If Customs determines it is "Kitchen Ware," the 50% surcharge is unavoidable.

✅ 3. "Food Contact" Declaration

• For HS Codes 6911.10.80.10 and 6912.00.48.10, the phrase "Suitable for food or drink contact" is mandatory.
• Consequence: If you omit this and it is classified as "Other," you might still face taxes, but you risk FDA (Food and Drug Administration) non-compliance seizures.

✅ 4. Labeling & Packaging

• Label: Must include "Made in [Country]" and Material Composition (e.g., "100% Porcelain").
• Invoice: Explicitly state "For Food Contact Use."
• Photos: Provide clear photos showing the material texture (glazed porcelain vs. metallic sheen).

📉 4. Cost Comparison Summary (Commercial Shipment)

🚀 5. Expert Recommendation

1. Material Switch: If you are importing steel dosing cups commercially, the 52%–78% tax burden is prohibitive. Consider switching to Porcelain (28.3%) or Stoneware Ceramic (9.8%) if the design allows.
2. De Minimis Strategy: For low-volume e-commerce (e.g., < $800 per shipment per person), the 78% tax is often waived (De Minimis), but this is risky for commercial bulk.
3. Pre-Classification: If the product is a "weighing accessory" rather than "kitchenware," consult a broker to see if it qualifies for a different chapter (e.g., weighing machines), though 7323 is the standard for "kitchen articles."

⚠️ Final Warning: The Steel Surcharge (50%) is aggressive. Ensure your supplier's material spec sheet is 100% accurate. A slight misclassification from "Ceramic" to "Steel" can destroy your profit margin.