Connection Cable
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8536908585 | 85.0% | CN | US | Official Doc |
| 8544493080 | 40.3% | CN | US | Official Doc |
| 8544493040 | 40.3% | CN | US | Official Doc |
| 8536904000 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
π Connection Cables (Power & Data Transmission Lines)
π HS Code Reference & Clearance Guide | 2026 Latest Tariff Breakdown | Strategic Clearance Strategy
π Part 1: Product Definition & Classification: Do You Really Know "Connection Cables"?
Connection Cables are the invisible lifelines of modern electronics, bridging devices, circuits, and power sources. In international trade, their classification depends entirely on structure, function, and intended use:
πΉ Power/Signal Transmission Cables (8544 Series):
Wires insulated by conductive materials (copper, aluminum) designed to transmit electricity or data. They lack complex electrical "connectors" at the ends.
πΉ Electrical Connection Accessories (8536 Series):
Cables or assemblies equipped with end connectors (plugs, sockets, couplers, terminals) specifically designed to join circuits or electrical apparatus.
β οΈ Critical Distinction:
- If the product is a bare wire or insulated conductor without complex end connectors β Likely 8544.
- If the product is a cordset with plugs/sockets or designed as a circuit junction device β Likely 8536.
- If the cable contains steel, aluminum, or copper components subject to specific "122 Clause" tariffs β Watch out for Section 232/122 duties!
π¦ Part 2: HS Code Classification Details (2026 Latest Tariff Reference)
Based on the provided data, here is the authoritative breakdown for Connection Cables:
| HS Code | Product Description | Usage Logic & Classification Basis | Total Tax Rate |
|---|---|---|---|
8536.90.85.85 |
Circuit Connection Electrical Apparatus | Matches the "Other" category for devices used to connect circuits. | 85.0% |
8544.49.30.80 |
Electrical Conductors (Other) | Fits the definition of "Electrical Conductors" under the "Other" sub-category. | 40.3% |
8544.49.30.40 |
Electrical Conductors (Other) | Classified as an "Electrical Conductor" based on the cable's physical form. | 40.3% |
8536.90.40.00 |
Electrical Connection Accessories | Matches logic for "Electrical connection apparatus" (joints/couplers) used to link circuits. | 35.0% |
π Key Insight:
- 8536 codes are for assemblies with connectors (plugs, couplers).
- 8544 codes are for conductors/wires (insulated cables).
- The Tax Rate Gap is massive: 85.0% vs 35.0%. Correct classification is the difference between profit and loss!
π° Part 3: 2026 Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
β Applicable Market: United States (US)
β Origin: China (CN)
β Effective Date: Current (including subsequent imports)
π― 1. 8536.90.85.85 β Circuit Connection Electrical Apparatus
β οΈ WARNING: HIGHEST TIER TARIFF!
| Item | Content |
|---|---|
| Base Duty | 0.0% |
| Section 301 Surcharge | +25.0% |
| Section 122 Duties (Steel/Aluminum/Copper) | +50.0% |
| Total Effective Rate | 85.0% |
| Tax Calculation | CIF Value Γ 85% |
| De Minimis Exemption | β NO (Strictly enforced) |
| Legal Basis Path | 301:45% (25+10) + 122:50% |
π Explanation:
- This code attracts a massive 85.0% total tax burden.
- 50% is specifically levied on products containing Steel, Aluminum, or Copper under the "122 Clause".
- 25% is the standard Section 301 surcharge.
- No Base Duty, but the surcharges make it one of the most expensive categories.
π― 2. 8544.49.30.80 β Electrical Conductors (Other)
| Item | Content |
|---|---|
| Base Duty | 5.3% |
| Section 301 Surcharge | +25.0% |
| Section 122 Duties (General 10% Class) | +10.0% |
| Total Effective Rate | 40.3% |
| Tax Calculation | CIF Value Γ 40.3% |
| De Minimis Exemption | β NO |
| Legal Basis Path | 301:25% + 122:10% |
π Note:
- This is a "Conductor" category. The "122 Clause" surcharge is 10% (lower than the 50% for 8536).
- Total 40.3% is still high but significantly lower than the 85% category.
π― 3. 8544.49.30.40 β Electrical Conductors (Other)
| Item | Content |
|---|---|
| Base Duty | 5.3% |
| Section 301 Surcharge | +25.0% |
| Section 122 Duties (General 10% Class) | +10.0% |
| Total Effective Rate | 40.3% |
| Tax Calculation | CIF Value Γ 40.3% |
| De Minimis Exemption | β NO |
| Legal Basis Path | 301:25% + 122:10% |
π Note:
- Functionally identical to the code above (8544.49.30.80) in terms of tax.
- Classification depends on specific cable form/family within the "Other Conductors" definition.
π― 4. 8536.90.40.00 β Electrical Connection Accessories (Joints/Couplers)
| Item | Content |
|---|---|
| Base Duty | 0.0% |
| Section 301 Surcharge | +25.0% |
| Section 122 Duties (General 10% Class) | +10.0% |
| Total Effective Rate | 35.0% |
| Tax Calculation | CIF Value Γ 35.0% |
| De Minimis Exemption | β NO |
| Legal Basis Path | 301:25% + 122:10% |
π Note:
- This is the MOST COST-EFFECTIVE option for "Circuit Connection" devices.
- Only 10% 122 surcharge (assuming it doesn't fall under the specific "Steel/Al/Cu" 50% bucket).
- Crucial Strategy: Try to classify here if the product is a "Coupler/Joint" rather than a generic "Apparatus."
π οΈ Part 4: Practical Clearance Advice (Real-World Pitfall Avoidance)
β 1. Material & Structure Declaration (Must-Have)
| Document | Requirement | Why It Matters |
|---|---|---|
| Bill of Materials (BOM) | βοΈ Essential | Must list % of Steel, Aluminum, Copper to determine if 122 Clause is 10% or 50%. |
| Technical Diagram | βοΈ Essential | Shows if it's a "Wire" (8544) or a "Connector/Assembly" (8536). |
| Product Photos | βοΈ Essential | Clear shots of ends (plugs vs. bare wires). |
| Composition Certificate | βοΈ Critical | Proves metal content to avoid the 50% surcharge. |
β 2. Declaration Strategy (The Golden Rules)
π₯ Rule of Thumb:
"Conductors = 8544 (40.3%); Connectors = 8536.90.40 (35.0%); Metal Heavy Apparatus = 8536.90.85 (85.0%)"
| Scenario | Recommended HS Code | Risk if Wrong |
|---|---|---|
| Bare Copper Wire / Insulated Cable | 8544.49.30.xx |
Don't declare as 8536 (risk of 85% if misclassified as apparatus). |
| Plug & Socket Cord (Power Cord) | 8536.90.40.00 |
Best rate (35%). Avoid 8536.90.85 (85%). |
| Cable with Heavy Metal Cladding/Sheathing | Verify 122 Clause | If >X% Steel/Al/Cu, may trigger 50% surcharge. |
| Generic "Circuit Device" | 8536.90.85.85 |
Highest Risk! Avoid unless strictly necessary. |
β 3. Special Handling for "122 Clause" Products
If your cable contains Steel, Aluminum, or Copper: 1. Check Composition: If the metal content triggers the 50% surcharge (specific to 8536.90.85.85), try to reclassify to 8544 or 8536.90.40 where the surcharge is only 10%. 2. Document the Alloy: Provide a certificate stating the specific alloy composition to prove it does not fall under the penalized "122" definition if possible.
π Part 5: Global Market Comparison (2026 Outlook)
| Region | Recommended HS Code | Est. Tariff (China Origin) | Key Requirement |
|---|---|---|---|
| πΊπΈ USA | 8536.90.40.00 or 8544.49.30.xx |
35.0% - 40.3% | Strict BOM & 122 Clause checks. |
| π¨π³ China | 8536 / 8544 |
~5% - 10% | CCC Certification. |
| πͺπΊ EU | 8536 / 8544 |
4.7% - 5.5% | CE + RoHS + REACH. |
| π―π΅ Japan | 8536 / 8544 |
0% - 5% | PSE Mark. |
π Conclusion:
- USA is the most expensive market due to the 122 Clause (50%) and 301 tariffs (25%).
- Strategy: For US export, prioritize8536.90.40.00(35%) or8544.49.30.xx(40.3%). Avoid8536.90.85.85unless absolutely unavoidable.
π Part 6: Common Mistakes & Pitfalls (Learn from Errors)
β Mistake 1: Treating all "Connection Cables" as 8536.90.85.85.
π Result: Paying 85% tax instead of 35% or 40%. Huge cost!
β Mistake 2: Ignoring the 122 Clause (Steel/Al/Cu).
π Result: Being hit with an unexpected 50% surcharge because metal content wasn't declared.
β Mistake 3: Declaring "Power Cable" as "Conductor" without proof.
π Result: Customs audit, delay, and potential fine.
β Mistake 4: Mixing "Connector" and "Wire" in one declaration.
π Result: Classification confusion, leading to the highest possible rate.
β Correct Action:
"Specify: Type, End Connectors, Conductor Material, and Metal Percentage."
π― Part 7: Conclusion β Precision is Profit!
π― Remember the Mantra:
πΉ "Connectors (8536.40) = 35%; Conductors (8544) = 40%; Metal Apparatus (8536.85) = 85%!"
πΉ "Check the Metal: 10% Surcharge vs 50% Surcharge!"
πΉ "Wrong Code = 50% Profit Loss!"
π Pro Tip:
If your product is 122 Clause sensitive (contains Steel/Al/Cu), consider restructuring the product design (e.g., changing the sheathing material) to qualify for the 10% surcharge instead of 50%.
Always apply for a Binding Tariff Information (BTI) / Advance Ruling before shipping to the US.
π£ Take Action Now:
π Consult a Customs Broker: Provide your BOM and Photos.
π Optimize Classification: Target8536.90.40.00or8544.49.30.40for the best rates.
πΌ Secure Your Margin: Avoid the 85% trap!
β¨ Professional Classification Starts Here!
π° Every percentage point saved is pure profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.