Corkscrew Set
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8210000000 | 38.7% | CN | US | Official Doc |
| 7323999030 | 88.4% | CN | US | Official Doc |
| 7323999080 | 88.4% | CN | US | Official Doc |
| 8205513030 | 38.7% | CN | US | Official Doc |
| 8205517500 | 38.7% | CN | US | Official Doc |
Product Images
AI Analysis
π· Corkscrew Set: The Ultimate HS Code & Taxation Guide | 2026 Clearance Strategy
π HS Code Reference & Clearance Guide | Professional Customs Clearance Strategy
π Overview: What is a "Corkscrew Set"?
A corkscrew set is a manual mechanical device primarily used for opening wine bottles. In international trade, the classification depends heavily on material composition (base metal vs. stainless steel/iron) and functional intent (kitchenware vs. general hand tools).
β οΈ Key Distinction: - If viewed as a general manual tool (base metal): Lower tax burden (38.7%). - If viewed as kitchen/tableware (stainless steel/iron): Higher tax burden (88.4%) due to specific US trade measures on steel/aluminum/copper products.
π¦ II. HS Code Classification Details (2026 Latest Tariff Schedule)
Based on the provided data, there are 5 potential HS Codes for a Corkscrew Set. The choice between them significantly impacts your landed cost.
| HS Code | Product Description & Rationale | Total Tax Rate | Key Tax Components |
|---|---|---|---|
| 8210.00.00.00 | Manual Mechanical Appliances: Belongs to manual mechanical instruments for preparing/supplying beverages. Material inferred as base metal (non-steel/aluminum/copper special category). | 38.7% | Base: 3.7% + Add'l: 25.0% + Sec 122: 10% |
| 8205.51.30.30 | Kitchen Tools & Hand Tools: Belongs to kitchen utensils/hand tools. Material inferred as iron or steel. Consistent with classification for kitchen tools. | 38.7% | Base: 3.7% + Add'l: 25.0% + Sec 122: 10% |
| 8205.51.75.00 | Hand Tools: Belongs to hand tools. Material inferred as metal or plastic. Fits "other household tools and parts" logic. | 38.7% | Base: 3.7% + Add'l: 25.0% + Sec 122: 10% |
| 7323.99.90.30 | Tableware/Kitchenware: Belongs to kitchen or table articles. Material is metal (iron or steel). Fits usage and material characteristics. | 88.4% | Base: 3.4% + Add'l: 25.0% + Sec 122: 10% + Steel/Al/Cu Add'l: 50% |
| 7323.99.90.80 | Household Articles: Belongs to household articles. Material is metal (iron or steel). Fits description for kitchenware articles and parts. | 88.4% | Base: 3.4% + Add'l: 25.0% + Sec 122: 10% + Steel/Al/Cu Add'l: 50% |
π Critical Note: - The 38.7% rate applies to codes under Chapter 82 (Tools/Manual Appliances) and some interpretations of Chapter 73. - The 88.4% rate applies when the corkscrew is strictly classified as Steel/Aluminum/Copper Tableware under Chapter 73, triggering an additional 50% tariff.
π° III. 2026 Tariff Rate Breakdown (Detailed Tax Clauses)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: 2025-11-10 onwards
π― 1. Low-Tax Scenario: 38.7% Total Rate
Applicable HS Codes:
- 8210.00.00.00
- 8205.51.30.30
- 8205.51.75.00
| Component | Rate | Legal Basis / Explanation |
|---|---|---|
| Base Tariff | 3.7% | Standard MFN (Most Favored Nation) duty for manual tools/appliances. |
| Section 301 Tariff | 25.0% | Additional duty on Chinese goods under US Trade Act Section 301. |
| Section 122 Tariff | 10.0% | Specific additional duty applied to this category. |
| Total Effective Rate | 38.7% | Sum of Base + 301 + 122. |
π Why this is cheaper: These codes classify the corkscrew as a manual tool/appliance rather than a steel tableware item, thereby avoiding the extra 50% steel-specific tariff.
π― 2. High-Tax Scenario: 88.4% Total Rate
Applicable HS Codes:
- 7323.99.90.30
- 7323.99.90.80
| Component | Rate | Legal Basis / Explanation |
|---|---|---|
| Base Tariff | 3.4% | Standard MFN duty for steel/iron articles of tableware. |
| Section 301 Tariff | 25.0% | Additional duty on Chinese goods under US Trade Act Section 301. |
| Section 122 Tariff | 10.0% | Specific additional duty. |
| Steel/Al/Cu Add'l | 50.0% | Crucial: Additional tariff specifically imposed on steel, aluminum, and copper products. |
| Total Effective Rate | 88.4% | Sum of Base + 301 + 122 + Steel Add'l. |
π Why this is expensive: The classification as "steel tableware" triggers the 50% surcharge on steel/aluminum/copper items, nearly doubling the cost compared to the tool classification.
π οΈ IV. Clearance Practical Advice (Risk Mitigation)
β 1. Documentation Checklist (Must-Haves)
| Document | Required? | Purpose |
|---|---|---|
| β Product Specification Sheet | βοΈ | Clearly states material (e.g., "Stainless Steel," "Zinc Alloy," or "Plastic Handle"). |
| β Product Photos | βοΈ | High-res images showing the entire set, mechanism, and any branding. |
| β Commercial Invoice | βοΈ | Must accurately describe the item as "Corkscrew Set" or "Manual Bottle Opener Set." |
| β Packing List | βοΈ | Details quantity and packaging type. |
| β Material Declaration | βοΈ | Explicitly state if the primary material is steel, iron, or base metal. |
β 2. Classification Strategy & Optimization
π₯ Golden Rule: "Tool vs. Tableware" Determines Tax!
| Strategy | Action | Expected Outcome |
|---|---|---|
| Optimal | Classify under Chapter 82 (Tools/Appliances) | 38.7% Tax (Lower cost) |
| Avoid | Classify under 7323.99 (Steel Tableware) unless strictly required | 88.4% Tax (Higher cost) |
π Recommendation: - If the corkscrew is a standalone manual tool or sold as a kit with other tools, advocate for HS Code 8210.00.00.00 or 8205.51.30.30. - Emphasize that the item is a mechanical instrument for beverage preparation, not merely a decorative or primary steel tableware item.
β 3. Common Errors & Pitfalls
β Error 1: Blindly using the "Steel Tableware" code (7323.99.90.30) because the material is steel.
π Consequence: Pays 88.4% instead of 38.7%. Overpayment of ~50%!
β Error 2: Vague description like "Kitchen Tool" without specifying material or function. π Consequence: Customs may reclassify arbitrarily, leading to delays or highest applicable rate.
β Error 3: Assuming all metal corkscrews are exempt from steel tariffs. π Consequence: If classified under Chapter 73, the 50% steel add-on applies regardless of Section 301 status.
π V. Global Market Comparison (2026)
| Market | Recommended HS Code | Est. Total Tax | Notes |
|---|---|---|---|
| πΊπΈ USA | 8210.00.00.00 |
38.7% | Avoid 7323.99 codes due to 50% steel surcharge. |
| π¨π³ China | 8205.51.30.30 |
Low/Standard | No Section 301 or 122 tariffs. |
| πͺπΊ EU | 8205.51.30.30 |
Low/Standard | Check for CE marking requirements. |
| π¬π§ UK | 8205.51.30.30 |
Low/Standard | Post-Brexit rules may vary slightly. |
π Conclusion: - For US imports, the 38.7% rate is significantly more favorable. - Ensure your product description and material declaration support a Chapter 82 classification (Tools/Appliances) rather than Chapter 73 (Steel Articles).
π VI. Final Tips for Smooth Clearance
- Pre-Ruling: Consider applying for a Binding Tariff Information (BTI) or US CBP Ruling if importing large volumes. This locks in the 38.7% rate.
- Material Focus: If the corkscrew has a plastic handle or is made of zinc alloy, emphasize this to avoid the "Steel" classification trap.
- Set Composition: If the set includes other tools (e.g., foil cutter, pourer), ensure the primary function is opening (tool) rather than just serving (tableware).
π― Remember the Mantra:
πΉ "Classify as Tool, Not Tableware!" πΉ "38.7% vs. 88.4% β Don't Let Steel Surcharge Sink Your Profit!"
π£ Immediate Action:
π Consult with your customs broker to justify the HS Code 8210.00.00.00 or 8205.51.30.30 classification. π Provide clear material specifications to avoid the 50% Steel Surcharge.
β¨ Professional clearance starts with precise classification! πΌ Save money by choosing the right HS Code!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.