Cup Set
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7323930080 | 62.0% | CN | US | Official Doc |
| 7323999030 | 88.4% | CN | US | Official Doc |
| 3924102000 | 24.0% | CN | US | Official Doc |
| 3924104000 | 13.4% | CN | US | Official Doc |
| 6911103510 | 43.5% | CN | US | Official Doc |
| 6911104500 | 24.0% | CN | US | Official Doc |
Product Images
AI Analysis
β Cup Sets & Tableware (Ceramic, Plastic, and Metal)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: Do You Know Your "Cup Set"?
A "Cup Set" is a broad category in international trade, encompassing items used for drinking, serving, or kitchen tasks. The critical factor for classification is the material composition and specific form. Misclassification here leads to drastic tariff differences, especially under current US trade policies.
In international trade, "Cup Sets" are broadly divided into three main categories based on material:
1. Ceramic/China Sets (Porcelain): The most common "tableware sets" found in retail. Includes teacups, mugs, saucers, and bowls made of fired clay. 2. Plastic Tableware: Disposable or durable plastic cups, mugs, and kitchenware. 3. Metal Tableware: Stainless steel or other metal cups, mugs, and kitchen utensils.
β οΈ Key Distinction Points:
- If the set includes saucers and is specifically for tea/coffee service β Often falls under 6911.10.35.10 (China/Ceramic).
- If it is a mug/stein without saucers or part of a general household set β May fall under 6911.10.45.00 (Other Ceramic).
- If it is Plastic β Look at Chapter 39 (Plastics).
- If it is Stainless Steel β Look at Chapter 73 (Iron/Steel).
π¦ II. HS Code Classification Details (Based on Provided Data)
Below are the specific HS Codes from the provided dataset, categorized by material.
π¦ Category A: Ceramic & Porcelain Tableware (Most Common for "Cup Sets")
| HS Code | Product Description | Applicable Scenario | Key Characteristics |
|---|---|---|---|
6911.10.35.10 |
Tableware and kitchenware: Other: Other: Available in specified sets | Complete Cup Sets (Tea/Coffee sets). Includes plates, teacups, saucers, mugs. Specifically: Plates β€27.9cm, teacups/saucers/mugs/cereal bowls β€22.9cm. | β Must be a set. Must include specified items (plates, cups, saucers). Pattern value constraint applies. |
6911.10.45.00 |
Tableware and kitchenware: Other: Other: Other: Mugs and other steins | Single Mugs or Non-Set Cups. Individual ceramic mugs, steins, or cups not part of a "specified set" defined above. | β Not a set. Focuses on individual "mugs" or "steins". No saucer/plate requirement. |
π Critical Reminder for Ceramic:
- If you ship a complete set (e.g., 12-piece tea set with cups, saucers, and plates), it must be classified under6911.10.35.10if it meets the size/value criteria.
- If you ship individual mugs or a set that doesn't fit the "specified set" definition (e.g., just bowls without plates/saucers), it may fall under6911.10.45.00.
π¨ Category B: Plastic Tableware & Kitchenware
| HS Code | Product Description | Applicable Scenario | Key Characteristics |
|---|---|---|---|
3924.10.20.00 |
Tableware, kitchenware... of plastics: Plates, cups, saucers, soup bowls, cereal bowls... | Plastic Cup Sets. Includes plastic cups, saucers, soup bowls, etc. | β Specific list of items (cups, saucers, bowls). If your plastic cup set includes these, it goes here. |
3924.10.40.00 |
Tableware, kitchenware... of plastics: Tableware and kitchenware: Other | Other Plastic Items. Plastic items not listed in the specific "cups/saucers" category (e.g., plastic cutlery sets, generic plastic containers). | β Generic "other" category. Use only if the specific "cup" description doesn't fit. |
π Critical Reminder for Plastic:
- If the item is explicitly a cup, saucer, or bowl made of plastic, use3924.10.20.00.
- Do not use3924.10.40.00for cups unless they are highly specialized and don't fit the standard "cup" definition.
π© Category C: Metal Tableware (Stainless Steel/Iron/Steel)
| HS Code | Product Description | Applicable Scenario | Key Characteristics |
|---|---|---|---|
7323.93.00.80 |
Table, kitchen... articles of iron or steel: Other: Of stainless steel | Stainless Steel Cups/Containers. Stainless steel mugs, thermoses, or kitchen containers. | β Material: Stainless Steel. Note: This code has a 50% additional tariff for steel/aluminum/copper products. |
7323.99.90.30 |
Table, kitchen... articles of iron or steel: Other: Other: Kitchen or tableware suitable for food or drink contact | Other Metal Tableware. Non-stainless steel (e.g., carbon steel) or plated/other metal cups/kitchenware for food contact. | β Food-contact safe. Note: This code has a 75% combined tariff (25% + 50%). |
π Critical Reminder for Metal:
- Stainless Steel vs. Other Steel: The distinction is crucial.7323.93.00.80is for stainless steel.7323.99.90.30is for other types.
- Both have huge additional tariffs due to trade policies on steel/aluminum.
π° III. 2026 Latest Tariff Rate Breakdown (Detailed Tax Clauses)
β Applicable Country: United States (US)
β Origin: China (CN) (Implied by "Additional Tariff" context in data)
β Effective Time: Current rates as per provided data
π― 1. Ceramic Cup Sets (High Tariff)
A. 6911.10.35.10 β Specified Ceramic Sets (Tea/Coffee Sets)
| Item | Content |
|---|---|
| Basic Tariff | 26.0% |
| Additional Tariff | +7.5% |
| Total Tariff | 33.5% |
| Tax Detail | "Basic Tariff: 26.0%, Additional Tariff: 7.5%" |
| Legal Basis | Chapter 69 (Ceramic Products) |
π Explanation:
- This is the standard high tariff for ceramic tableware sets.
- No steel/aluminum/copper additional tariff applies here (it's ceramic).
- Cost Impact: High. A $100 set incurs $33.50 in tariffs.
B. 6911.10.45.00 β Other Ceramic Mugs/Steins
| Item | Content |
|---|---|
| Basic Tariff | 14.0% |
| Additional Tariff | 0.0% |
| Total Tariff | 14.0% |
| Tax Detail | "Basic Tariff: 14.0%, Additional Tariff: 0.0%" |
| Legal Basis | Chapter 69 (Ceramic Products) |
π Explanation:
- Lower tariff than specified sets.
- If you can classify items as "Mugs/Steins" (not a "specified set"), you save 19.5% in tariffs.
- Strategy: Avoid calling them "Sets" in documentation if they are individual mugs.
π― 2. Plastic Cup Sets (Moderate Tariff)
A. 3924.10.20.00 β Plastic Cups/Saucers/Bowls
| Item | Content |
|---|---|
| Basic Tariff | 6.5% |
| Additional Tariff | +7.5% |
| Total Tariff | 14.0% |
| Tax Detail | "Basic Tariff: 6.5%, Additional Tariff: 7.5%" |
| Legal Basis | Chapter 39 (Plastics) |
π Explanation:
- Moderate tariff.
- Note: The 7.5% additional tariff applies.
- Cost Impact: $100 plastic cup set = $14.00 tariff.
B. 3924.10.40.00 β Other Plastic Tableware
| Item | Content |
|---|---|
| Basic Tariff | 3.4% |
| Additional Tariff | 0.0% |
| Total Tariff | 3.4% |
| Tax Detail | "Basic Tariff: 3.4%, Additional Tariff: 0.0%" |
| Legal Basis | Chapter 39 (Plastics) |
π Explanation:
- Lowest tariff for plastics.
- Only use if the item is not a "cup/saucer/bowl" but "other" tableware.
π― 3. Metal Cup Sets (Very High Tariff)
A. 7323.93.00.80 β Stainless Steel Items
| Item | Content |
|---|---|
| Basic Tariff | 2.0% |
| Additional Tariff (Steel/Al/Cu) | +50% |
| Total Tariff | 52.0% |
| Tax Detail | "Basic Tariff: 2.0%, Additional Tariff: 0.0% Steel, Aluminum, Copper Products Additional Tariff: 50%" |
| Legal Basis | Chapter 73 (Iron/Steel) + Section 301/Trade Policy |
π Explanation:
- Extremely High Tariff.
- The 50% is due to the specific Steel/Aluminum/Copper additional tariff policy.
- Cost Impact: $100 stainless steel mug = $52.00 tariff.
- Warning: This is one of the highest tariffs for tableware.
B. 7323.99.90.30 β Other Metal Tableware (Food Contact)
| Item | Content |
|---|---|
| Basic Tariff | 3.4% |
| Additional Tariff (Specific) | +25% |
| Additional Tariff (Steel/Al/Cu) | +50% |
| Total Tariff | 78.4% |
| Tax Detail | "Basic Tariff: 3.4%, Additional Tariff: 25.0% Steel, Aluminum, Copper Products Additional Tariff: 50%" |
| Legal Basis | Chapter 73 (Iron/Steel) + Section 301/Trade Policy |
π Explanation:
- Highest Tariff in the list.
- Combines multiple additional tariffs.
- Cost Impact: $100 metal cup = $78.40 tariff.
- Strategy: Avoid metal tableware from China if possible, or ensure strict classification.
π οΈ IV. Customs Clearance Practical Advice (Avoid Pitfalls)
β 1. Preparation Checklist (Essential Documents)
| Document | Must Provide | Purpose |
|---|---|---|
| β Product Photos | βοΈ | Clear images of the set, showing if it includes saucers, plates, etc. |
| β Composition Statement | βοΈ | Explicitly state material: "100% Ceramic," "Food-Grade Plastic," "304 Stainless Steel." |
| β Set Declaration | βοΈ | If claiming 6911.10.35.10, list all items in the set and their values. |
| β Commercial Invoice | βοΈ | Accurate description, HS Code, Country of Origin. |
| β Packing List | βοΈ | Show individual units vs. sets. |
β 2. Classification Strategy (Key Tips)
π₯ "Material First, Then Form, Then Set!"
| Situation | Correct HS Code | Why? |
|---|---|---|
| Ceramic Tea Set (Cups + Saucers + Plates) | 6911.10.35.10 |
Fits "specified set" definition. High tariff (33.5%). |
| Single Ceramic Mug (No saucer/plate) | 6911.10.45.00 |
Fits "Mugs/Steins". Lower tariff (14.0%). |
| Plastic Cup (With Saucer) | 3924.10.20.00 |
Fits "Cups/Saucers" plastic category. (14.0%). |
| Plastic Cup (No saucer, generic) | 3924.10.40.00 |
Fits "Other" plastic. Lowest tariff (3.4%). |
| Stainless Steel Mug | 7323.93.00.80 |
Fits "Stainless Steel". Very high tariff (52.0%). |
| Other Metal Cup | 7323.99.90.30 |
Fits "Other Metal". Highest tariff (78.4%). |
β 3. Special Considerations for "Cup Sets"
| Scenario | Advice |
|---|---|
| "Set" Definition | US Customs is strict about what constitutes a "set." If items are sold together but are not functionally complementary (e.g., a cup with a random spoon), it may not be a "set." |
| Value Threshold | For 6911.10.35.10, there is a note about aggregate value. Ensure the value of items in the set meets the criteria. |
| Stainless Steel Warning | The 50% additional tariff for steel products is non-negotiable for most Chinese-origin steel. Check if your steel is truly stainless and if any exemption applies. |
| Plastic Labeling | Ensure plastic cups are marked as "Food Contact Safe" to avoid rejection. |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification Required | Notes |
|---|---|---|---|---|
| πΊπΈ US | 6911.10.35.10 (Ceramic) |
33.5% | None specific | High tariff for sets. |
| πΊπΈ US | 6911.10.45.00 (Ceramic) |
14.0% | None specific | Lower tariff for mugs. |
| πΊπΈ US | 7323.93.00.80 (Steel) |
52.0% | None specific | Steel tariff is punitive. |
| πͺπΊ EU | 6911.10 (Ceramic) |
12-15% | CE, LFGB | No additional trade tariffs. |
| π¨π³ China | 6911.10 (Ceramic) |
8-14% | None | Lower import tariff. |
| π¬π§ UK | 6911.10 (Ceramic) |
12% | None | Post-Brexit tariffs. |
π Conclusion:
- US Market: Tariffs are very high for ceramic sets and metal tableware due to trade policies.
- EU/UK/China: Tariffs are significantly lower. Consider re-routing or localizing production if targeting the US with high-tariff items.
π VI. Common Mistakes & Pitfalls (Lessons Learned)
β Mistake 1: Classifying a Ceramic Tea Set as "Other Ceramic" (6911.10.45.00) to save tax.
π Consequence: Customs will reclassify it as a "Set" and charge 33.5% + penalties.
π Lesson: If it has saucers and plates, itβs a set. Declare it correctly.
β Mistake 2: Calling Stainless Steel Mugs "Plastic" or "Ceramic" to avoid the 50% steel tariff.
π Consequence: Fraud detection. Seizure of goods, fines, and blacklisting.
π Lesson: Material must be accurate. Use 7323.93.00.80 with confidence.
β Mistake 3: Assuming Plastic Cups are all "Other" (3924.10.40.00).
π Consequence: If they are clearly "cups" or "saucers," they should be 3924.10.20.00 (14%). If misclassified, you might pay less, but risk audit. If misclassified the other way, you might pay more.
π Lesson: Be precise. "Cups" go to 3924.10.20.00.
π― VII. Conclusion: Professional Declaration for Cost Optimization
π― Key Takeaways:
πΉ Ceramic Sets (
6911.10.35.10): 33.5% Tariff. High cost.
πΉ Ceramic Mugs (6911.10.45.00): 14.0% Tariff. Lower cost. Avoid "Set" labeling.
πΉ Plastic Cups (3924.10.20.00): 14.0% Tariff. Moderate cost.
πΉ Plastic Other (3924.10.40.00): 3.4% Tariff. Lowest cost. Only if not cups.
πΉ Stainless Steel (7323.93.00.80): 52.0% Tariff. Very high cost.
πΉ Other Metal (7323.99.90.30): 78.4% Tariff. Highest cost. Avoid if possible.
π Pro Tip:
For US Imports, consider reclassifying individual mugs as "Mugs/Steins" (
6911.10.45.00) instead of "Sets" to save 19.5% in tariffs.
For Metal, explore non-stainless alternatives or local sourcing to avoid the 50% steel tariff.
π£ Action Required:
π Verify material composition with suppliers.
π· Take clear photos of all items in the set.
π Prepare accurate Commercial Invoices with precise HS Codes.
π Optimize your customs clearance and protect your profit margins!
β¨ Precision in Classification is Profit in Pocket!
πΌ Your Cup Set, Your Strategy, Your Savings!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.