Curtain Holdbacks
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8302419050 | 38.5% | CN | US | Official Doc |
| 3926305000 | 22.8% | CN | US | Official Doc |
| 7326190080 | 87.9% | CN | US | Official Doc |
| 3926902500 | 24.0% | CN | US | Official Doc |
| 8302416050 | 88.9% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
AI Analysis
πͺ Curtain Holdbacks: The Ultimate Clearance Guide (HS Code & Tax Breakdown)
π HS Code Reference & Customs Clearance Strategy | 2026 Latest Tariff Analysis | Professional Customs Strategy
π I. Product Definition & Classification: Do You Really Know "Curtain Holdbacks"?
Curtain holdbacks (also known as tie-backs, swags, or curtain hooks) are essential accessories used to gather and secure curtains, drapes, and valances away from windows. In international trade, these items are classified differently based on their material composition. The key distinction lies between base metals (iron, steel, aluminum, copper) and plastics.
β οΈ Critical Distinction Point:
- Metallic Holdbacks: Include steel, iron, aluminum, or copper-based fixtures. These fall under Chapter 73 (Articles of Iron or Steel) or Chapter 83 (Base Metal Articles).
- Plastic Holdbacks: Include PVC, acrylic, or other polymer-based connectors. These fall under Chapter 39 (Articles of Plastics).
- Misclassification Risk: Declaring a steel holdback as plastic (or vice versa) can lead to significant duty discrepancies, especially given the steep additional tariffs on steel/aluminum products.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Material | Applicable Scenario |
|---|---|---|---|
8302.41.90.50 |
Curtain Holdback, Metal Base Metal Article | Metal (Base Metal) | General metal curtain hooks, decorative metal ties |
3926.30.50.00 |
Curtain Holdback, Plastic Connector | Plastic | Plastic hooks, simple plastic tie-backs |
7326.19.00.80 |
Curtain Holdback, Other Iron/Steel Products | Steel/Iron | Heavy-duty steel hooks, structural steel tie-backs |
3926.90.25.00 |
Curtain Holdback, Other Plastic Articles | Plastic | Complex plastic curtain accessories, non-specific plastic ties |
8302.41.60.50 |
Curtain Holdback, Fitting for Curtains | Base Metal | Specific base metal fittings for curtain installation |
7326.90.86.88 |
Curtain Holdback, Other Iron/Steel Articles | Iron/Steel | Miscellaneous iron/steel curtain hardware |
π Key Reminder:
- Steel/Iron products (7326.*) carry the highest total tax burden (87.9%) due to specific 50% surtax on steel/aluminum/copper products.
- Base Metal products (8302.*) also face high taxes (88.9% for8302.41.60.50) due to similar surtaxes.
- Plastic products (3926.*) remain the lowest cost option for tariffs (22.8% - 24.0%).
π° III. 2026 Latest Tariff Rate Detailed Analysis (Including Additional Taxes, Policy Add-ons)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Date: Ongoing (including imports after 2025)
π― 1. 8302.41.90.50 ββ Curtain Holdback, Base Metal Article (Metal)
| Item | Content |
|---|---|
| Base Duty Rate | 3.5% (ad valorem) |
| Section 301 Additional Duty | +25.0% |
| Section 122 Duty | +10.0% |
| Total Tax Rate | 38.5% |
| Tax Calculation | CIF Value Γ 38.5% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | USITC:8302.41.90.50 β Section 301: 25% β Section 122: 10% |
π Explanation:
- This is a standard "base metal" classification.
- The 38.5% total rate is driven by the 25% Section 301 tariff (Trump-era trade war tariffs) and a 10% Section 122 tariff.
- No extra 50% steel surtax applies here, making it the most favorable metal option.
π― 2. 3926.30.50.00 ββ Curtain Holdback, Plastic Connector (Plastic)
| Item | Content |
|---|---|
| Base Duty Rate | 5.3% (ad valorem) |
| Section 301 Additional Duty | +7.5% |
| Section 122 Duty | +10.0% |
| Total Tax Rate | 22.8% |
| Tax Calculation | CIF Value Γ 22.8% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | USITC:3926.30.50.00 β Section 301: 7.5% β Section 122: 10% |
π Explanation:
- Plastics face lower Section 301 tariffs (7.5%) compared to metals.
- 22.8% is the lowest total tax rate among all listed HS codes.
- Ideal for cost-sensitive shipments where product design allows for plastic materials.
π― 3. 7326.19.00.80 ββ Curtain Holdback, Other Iron/Steel Products (Steel/Iron)
| Item | Content |
|---|---|
| Base Duty Rate | 2.9% (ad valorem) |
| Section 301 Additional Duty | +25.0% |
| Section 122 Duty | +10.0% |
| Steel/Aluminum/Copper Surtax | +50.0% |
| Total Tax Rate | 87.9% |
| Tax Calculation | CIF Value Γ 87.9% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | USITC:7326.19.00.80 β Section 301: 25% β Section 122: 10% β Steel Surtax: 50% |
π Explanation:
- β οΈ EXTREME DUTY ALERT: This category incurs a 50% additional surtax specifically for steel products.
- 87.9% is the highest tax rate.
- Only choose this HS code if the product is explicitly classified as "other iron/steel articles" and not as a general base metal fitting.
π― 4. 3926.90.25.00 ββ Curtain Holdback, Other Plastic Articles (Plastic)
| Item | Content |
|---|---|
| Base Duty Rate | 6.5% (ad valorem) |
| Section 301 Additional Duty | +7.5% |
| Section 122 Duty | +10.0% |
| Total Tax Rate | 24.0% |
| Tax Calculation | CIF Value Γ 24.0% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | USITC:3926.90.25.00 β Section 301: 7.5% β Section 122: 10% |
π Explanation:
- Slightly higher than3926.30.50.00due to a higher base duty (6.5% vs 5.3%).
- Still very competitive at 24.0%.
π― 5. 8302.41.60.50 ββ Curtain Holdback, Fitting for Curtains (Base Metal)
| Item | Content |
|---|---|
| Base Duty Rate | 3.9% (ad valorem) |
| Section 301 Additional Duty | +25.0% |
| Section 122 Duty | +10.0% |
| Steel/Aluminum/Copper Surtax | +50.0% |
| Total Tax Rate | 88.9% |
| Tax Calculation | CIF Value Γ 88.9% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | USITC:8302.41.60.50 β Section 301: 25% β Section 122: 10% β Metal Surtax: 50% |
π Explanation:
- Despite being a "base metal" code (8302), it triggers the 50% surtax for steel/aluminum/copper products.
- 88.9% is the highest overall tax rate.
- Avoid this classification unless legally required for specific fittings.
π― 6. 7326.90.86.88 ββ Curtain Holdback, Other Iron/Steel Articles (Iron/Steel)
| Item | Content |
|---|---|
| Base Duty Rate | 2.9% (ad valorem) |
| Section 301 Additional Duty | +25.0% |
| Section 122 Duty | +10.0% |
| Steel/Aluminum/Copper Surtax | +50.0% |
| Total Tax Rate | 87.9% |
| Tax Calculation | CIF Value Γ 87.9% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | USITC:7326.90.86.88 β Section 301: 25% β Section 122: 10% β Steel Surtax: 50% |
π Explanation:
- Identical tax structure to7326.19.00.80.
- High cost due to steel surtax.
π οΈ IV. Customs Clearance Practical Suggestions (Battle-Tested Pitfall Avoidance)
β 1. Preparation Checklist (All Items Mandatory)
| Document | Required | Notes |
|---|---|---|
| β Product Spec Sheet | βοΈ | Clearly state material (e.g., "Zinc Alloy," "PVC Plastic," "Stainless Steel") |
| β Material Declaration | βοΈ | Must match HS Code; e.g., "100% Plastic" for 3926 codes |
| β Product Photos | βοΈ | Show hooks, connectors, and any packaging labels |
| β Commercial Invoice | βοΈ | Describe item as "Curtain Holdback/Tie-Back" with material detail |
| β Packing List | βοΈ | Ensure no mixed materials in one shipment if possible to avoid complexity |
β 2. Declaration Strategy (Key Mantras)
π₯ βMaterial Dictates Duty: Plastic Wins, Steel Burns!β
| Scenario | Correct Declaration | Wrong Declaration |
|---|---|---|
| Plastic Holdback | 3926.30.50.00 (22.8%) |
Declare as Metal β 38.5%+ |
| Steel Hook | 7326.19.00.80 (87.9%) |
Declare as Plastic β Seizure/Fine |
| Base Metal Fitting | 8302.41.90.50 (38.5%) |
Declare as Steel Article β 87.9% |
| Mixed Materials | Split Declaration | Mixed shipment β Audit Risk |
β 3. Special Case Handling
| Scenario | Handling Advice |
|---|---|
| Zinc/Aluminum Alloy | Check if it falls under 8302 (Base Metal) or 7326 (Steel). If it contains significant steel, Surtax applies. |
| Coated Metals | Galvanized or painted steel is still considered steel. Surtax likely applies. |
| Composite Materials | If >50% by weight is plastic, may qualify for 3926. Consult customs broker. |
| OEM Custom Designs | Provide design specs to prove material composition. |
π V. Global Market Customs Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Duty Rate (CN Origin) | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3926.30.50.00 (Plastic) |
22.8% | None | Lowest cost for plastics |
| πΊπΈ USA | 8302.41.90.50 (Base Metal) |
38.5% | None | Best option for metals |
| πΊπΈ USA | 7326.19.00.80 (Steel) |
87.9% | None | Avoid if possible |
| πͺπΊ EU | 7326.90.99 |
~2.7% | CE (if applicable) | Lower duties, no surtax |
| π¬π§ UK | 8302.41.00 |
~3.5% | UKCA | Standard base metal rate |
| π¨π¦ Canada | 7326.90.98 |
~5.25% | None | Moderate duty |
| π¦πΊ Australia | 7326.90.90 |
~5.0% | None | Moderate duty |
π Conclusion:
- USA is the most punitive market for steel curtain holdbacks due to the 50% surtax.
- Plastic holdbacks are the most tariff-efficient for US imports.
- European markets offer significantly lower duties for metal products.
π VI. Common Mistakes & Pitfall Avoidance (Blood-Learned Lessons)
β Mistake 1: Declaring Steel Holdbacks as "Plastic"
π Consequence: Customs audit, seizure, and heavy fines.
π Solution: Always declare true material.
β Mistake 2: Ignoring the "Steel Surtax" for 7326 codes
π Consequence: Budget overrun by ~50%.
π Solution: Use 8302.41.90.50 if possible for base metal fittings to avoid the 50% surtax.
β Mistake 3: Using "Curtain Accessory" as Generic Description
π Consequence: Customs may reclassify to highest applicable duty rate.
π Solution: Use specific descriptions: "Plastic Curtain Holdback" or "Steel Curtain Hook."
β Correct Practice:
"Curtain Holdback, Plastic, Hook Type, for Residential Use" β HS 3926.30.50.00
"Curtain Holdback, Base Metal, Decorative, for Drapes" β HS 8302.41.90.50
π― VII. Conclusion: Precision Classification Saves Money!
π― Remember the Mantra:
πΉ "Plastic is King, Base Metal is Queen, Steel is the Kingβs Enemy!"
πΉ "Plastic: 22.8%, Base Metal: 38.5%, Steel: 88% β Pick wisely!"
π Pro Tip:
- If your product is steel-based, consider redesigning with plastic or zinc alloy (if classified under 8302) to save ~50% in duties.
- Always apply for an Advance Ruling from US Customs if the material composition is ambiguous.
π£ Immediate Action:
π Contact your customs broker with material specs.
π Choose the lowest duty HS Code legally applicable.
π Maximize profit margins by avoiding unnecessary steel surtaxes!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Every percentage point of duty matters!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.