Desk Cable Grommet
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3926305000 | 22.8% | CN | US | Official Doc |
| 3926909987 | 22.8% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 7326908630 | 87.9% | CN | US | Official Doc |
| 4016991500 | 20.2% | CN | US | Official Doc |
| 4016931010 | 37.5% | CN | US | Official Doc |
Product Images
AI Analysis
π₯οΈ Desk Cable Grommet (Cable Management Fittings)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: Do You Really Understand "Cable Grommets"?
Desk Cable Grommets, also known as cable pass-through fittings or cord grommets, are essential accessories for ergonomic workspaces. They allow cables to pass smoothly through desks, preventing fraying, snagging, and damage. In international trade, they are categorized based on their material composition and functionality:
- Rubber/Silicone Grommets: Flexible, often used for high-durability or anti-vibration applications.
- Plastic Fittings: Rigid or semi-rigid, often part of modular furniture systems.
β οΈ Key Distinction Point:
- If the product is made of Vulcanized Rubber and functions as a seal/gasket β Classified under Chapter 40.
- If the product is made of Plastics and functions as a furniture fitting β Classified under Chapter 39.
- Note: Iron/Steel fittings are excluded from this specific input data set but typically fall under Chapter 73 if metal.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authoritative Comparison)
Based on the provided dataset, here are the applicable HS Codes for Desk Cable Grommets depending on material:
| HS Code | Product Description | Material | Applicable Scenario |
|---|---|---|---|
4016.99.15.00 |
Other articles of vulcanized rubber: Caps, lids, seals, stoppers and other closures | Vulcanized Rubber | Rubber grommets that act as seals/closures for cables |
3926.30.50.00 |
Other articles of plastics: Fittings for furniture, coachwork or the like: Other | Plastics | Plastic cable grommets for office desks/furniture |
3926.90.99.87 |
Other articles of plastics: Other: Other Rigid tubes or pipes suitable for use as electrical conduit | Plastics | Rigid plastic conduit sleeves for cable management |
π Important Note:
- The dataset provided does not include iron/steel cable grommets (which would likely fall under7326.90.86.xwith high tariffs).
- Plastic fittings for furniture (3926.30.50.00) are the most common classification for standard office desk grommets.
π° III. 2026 Latest Tariff Rate Breakdown (Detailed Tax Analysis)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: Current tariffs apply (2025-2026 context)
π― 1. 4016.99.15.00 ββ Other Articles of Vulcanized Rubber (Closures/Seals)
| Item | Content |
|---|---|
| Basic Tariff | 2.7% (ad valorem) |
| Additional Tariff (Section 301) | +7.5% |
| Total Tax Rate | 10.2% |
| Tax Calculation | CIF Value Γ 10.2% |
| De Minimis Eligibility | β No (Standard threshold applies) |
π Explanation:
- Rubber grommets classified as "seals" or "closures" incur a moderate additional tariff of 7.5%.
- This is significantly lower than metal products but higher than many plastic fittings.
π― 2. 3926.30.50.00 ββ Plastic Fittings for Furniture
| Item | Content |
|---|---|
| Basic Tariff | 0.0% |
| Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | $0 |
| De Minimis Eligibility | β Yes (Likely eligible under de minimis if value < $800, subject to current policy) |
π Critical Advantage:
- Zero Duty! Plastic fittings for furniture enjoy 0% basic tariff and 0% additional tariff in this dataset.
- This makes plastic cable grommets the most cost-effective option for US importers from China.
π― 3. 3926.90.99.87 ββ Other Plastic Articles (Electrical Conduit)
| Item | Content |
|---|---|
| Basic Tariff | 0.0% |
| Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | $0 |
π Note:
- If the grommet is considered part of an "electrical conduit" system, it still enjoys 0% tariff.
- However,3926.30.50.00is more specific for "furniture fittings," which is the primary use case for desk grommets.
π« Excluded Items from Dataset (High Tariff Warning)
The following HS Codes appear in the dataset but are NOT typical for plastic/rubber desk grommets. They represent Iron/Steel products with extremely high tariffs:
| HS Code | Description | Total Tax | Warning |
|---|---|---|---|
7326.90.86.88 |
Other articles of iron/steel | 77.9% | β οΈ EXTREMELY HIGH |
7326.90.86.30 |
Hangers/supports for tubes/pipes | 77.9% | β οΈ EXTREMELY HIGH |
π Clarification:
- If your desk grommet is made of metal (steel/iron) and not specifically a "hanger," it might be misclassified into these high-tariff buckets if not carefully described.
- Recommendation: Avoid metal grommets if possible due to the 77.9% total tariff (2.9% base + 25% Sec 301 + 50% Steel/Aluminum/Copper surcharge).
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance)
β 1. Preparation Checklist (Must-Have Documents)
| Document | Required | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Material (Plastic/Rubber), Dimensions, Load Capacity |
| β Material Declaration | βοΈ | Explicitly state "100% Plastic" or "Vulcanized Rubber" |
| β Photos (Clear) | βοΈ | Show product shape, labeling, and packaging |
| β Commercial Invoice | βοΈ | Describe as "Plastic Cable Grommet for Furniture" or "Rubber Seal Grommet" |
| β Packing List | βοΈ | Weight, Quantity, HS Code |
β 2. Declaration Tips (Key Mantra)
π₯ "Material Matters! Plastic is Free, Rubber is Low, Metal is Heavy!"
| Scenario | Correct HS Code | Tax Rate | Risk Level |
|---|---|---|---|
| Plastic Grommet | 3926.30.50.00 |
0% | β Low |
| Rubber Grommet | 4016.99.15.00 |
10.2% | β Medium |
| Metal Grommet | 7326.90.86.x |
77.9% | β Critical |
β 3. Special Handling
| Situation | Recommendation |
|---|---|
| Mixed Material | If a plastic grommet has a rubber insert, consult customs. It may be classified by essential character (usually plastic). |
| OEM Custom Grommets | Provide design files to prove it is a "furniture fitting" (3926.30.50.00) rather than a generic plastic article. |
| Small Quantity (De Minimis) | If under $800, plastic grommets (3926.30.50.00) may enter duty-free under de minimis rules. Rubber (10.2%) may also be exempt if under threshold. |
π V. Global Market Comparison (2026 Update)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Notes |
|---|---|---|---|
| πΊπΈ USA | 3926.30.50.00 |
0% | Best for plastic; avoid metal (77.9%) |
| πͺπΊ EU | 3926.30.50.00 |
~4-5% | Standard MFN rate; no additional surcharges |
| π¨π³ China | 3926.30.50.00 |
~5% | Import duty for domestic market |
π VI. Common Errors & Pitfalls (Lessons Learned)
β Error 1: Declaring metal grommets as "plastic"
π Consequence: Customs audit β Seizure + Fines + Back Taxes (77.9%)!
β Error 2: Using vague description "Grommet"
π Consequence: Customs may classify under worst-case scenario (e.g., "Other articles of plastics" at higher duty or rubber at 10.2% if not specified).
β Error 3: Ignoring the "Furniture Fitting" clause
π Consequence: If not declared as "for furniture," plastic grommets might fall under 3926.90.99.87 (still 0% in this dataset, but less specific).
β Correct Declaration:
"Plastic Cable Grommet for Office Desk Furniture, Model XYZ, 100% ABS Plastic, Color: Black"
π― VII. Conclusion: Professional Classification Saves Money!
π― Remember the Mantra:
πΉ "Plastic Grommets: 0% Duty!"
πΉ "Rubber Grommets: 10.2% Duty"
πΉ "Metal Grommets: 77.9% Duty β AVOID!"
πΉ "HS Code is King, Material is Queen, Declare Both to Save the Sheen!"
π Pro Tip:
If you are sourcing from China, switch to Plastic Grommets to save 10.2% to 77.9% in tariffs. For rubber grommets, the 10.2% is manageable, but ensure accurate description as "seals/closures" under 4016.99.15.00 to avoid misclassification.
π£ Take Action Now:
π Consult a Customs Broker + Provide Product Photos + Apply for Advance Ruling if uncertain
π Clearance Smooth, Cost Optimized, Profit Protected!
β¨ Professional Customs Clearance Starts with Precise Classification!
πΌ Every Dollar Saved is a Dollar Earned!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.