Dripper
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7323999030 | 88.4% | CN | US | Official Doc |
| 3924104000 | 13.4% | CN | US | Official Doc |
| 6911108090 | 38.3% | CN | US | Official Doc |
| 6911108010 | 38.3% | CN | US | Official Doc |
AI Analysis
β Dripper (Coffee/Fluid Dispenser)
π HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π 1. Product Definition & Classification: Do You Really Understand the "Dripper"?
A Dripper is primarily a kitchenware or tableware item used for filtering, pouring, or dispensing liquids (most commonly coffee). In international trade, its classification depends entirely on its material composition. The most common confusion lies between metal (stainless steel), plastic, and ceramic/porcelain drippers.
β οΈ Key Distinction Point:
- If made of Iron/Steel/Stainless Steel β Chapter 73
- If made of Plastic β Chapter 39
- If made of Porcelain/Ceramic β Chapter 69
π¦ 2. HS Code Classification Details (Based on Provided Data)
Based on the <DATA> provided, here are the three possible classifications for a Dripper, along with their tax implications.
| HS Code | Material | Summary from Data | Total Tax Rate |
|---|---|---|---|
7323.99.90.30 |
Metal / Stainless Steel | Filter scoops belong to kitchen/tableware, typically metal or stainless steel. Fits "Iron/Steel household articles." | 88.4% |
3924.10.40.00 |
Plastic | Filter scoops belong to kitchen utensils, assumed plastic. Matches "Plastic tableware/kitchenware." | 13.4% |
6911.10.80.90 / 6911.10.80.10 |
Porcelain / Ceramic | Dripper is a kitchen utensil/utensil shape, inferred as porcelain/ceramic. Matches "Porcelain or China." | 38.3% |
π Critical Observation:
- The Metal option (7323.99.90.30) carries the highest tax burden due to heavy tariffs on steel/aluminum products.
- The Plastic option (3924.10.40.00) is the most cost-effective in terms of duty.
- Ceramic (6911.10.80.90/.10) sits in the middle but is significantly cheaper than metal.
π° 3. 2026 Latest Tariff Rate Breakdown (Detailed Tax Clauses)
β Applicable Country: United States (US)
β Origin: China (CN)
β Note: These rates reflect significant trade tensions and specific tariff clauses.
π― 1. 7323.99.90.30 ββ Metal/Stainless Steel Dripper
| Item | Details |
|---|---|
| Base Tariff | 3.4% |
| Retaliatory/Additional Tariff | 25.0% (Section 301) |
| Section 122 Clause (Steel/Aluminum/Copper) | 50% |
| Total Tax Rate | 88.4% |
| Calculation Basis | CIF Value Γ 88.4% |
π Explanation:
- This is the most punitive classification.
- The 50% Section 122 tariff is specifically targeted at steel, aluminum, and copper products.
- Combined with the 25% Section 301 tariff, importing a metal dripper from China incurs a massive tax load.
π― 2. 3924.10.40.00 ββ Plastic Dripper
| Item | Details |
|---|---|
| Base Tariff | 3.4% |
| Retaliatory/Additional Tariff | 0.0% |
| Section 122 Clause | 10% (Note: Data says "122 Clause 10%", likely referring to a specific agricultural or minor commodity clause, not the heavy steel/aluminum 122) |
| Total Tax Rate | 13.4% |
| Calculation Basis | CIF Value Γ 13.4% |
π Explanation:
- Plastic products generally face lower geopolitical tariff risks.
- The 10% Section 122 mentioned here is likely different from the 50% steel tariff, or it refers to a specific subset of plastic goods.
- This is the most economical choice for clearance.
π― 3. 6911.10.80.90 / 6911.10.80.10 ββ Ceramic/Porcelain Dripper
| Item | Details |
|---|---|
| Base Tariff | 20.8% |
| Retaliatory/Additional Tariff | 7.5% |
| Section 122 Clause | 10% |
| Total Tax Rate | 38.3% |
| Calculation Basis | CIF Value Γ 38.3% |
π Explanation:
- Ceramic goods have a higher base tariff (20.8%) compared to plastic or metal.
- However, the additional tariffs (7.5% + 10%) are significantly lower than the steel-specific 50% + 25% combo.
- Total cost is roughly half that of the metal version.
π οΈ 4. Practical Clearance Recommendations
β 1. Material Declaration is Key
π₯ βDeclare Material Precisely, Tax Rate Drops Dramatically!β
| Scenario | Correct Declaration | Incorrect Declaration | Result |
|---|---|---|---|
| Stainless Steel Dripper | 7323.99.90.30 |
Misdeclared as Plastic (3924...) |
Risk of Penalty/Seizure (Fraud) |
| Plastic Dripper | 3924.10.40.00 |
Misdeclared as Metal | Overpayment (Pay 88.4% instead of 13.4%) |
| Ceramic Dripper | 6911.10.80.90 |
Misdeclared as Plastic | Risk of Penalty (Material mismatch) |
π Advice:
- If you are importing Plastic Drippers, you save ~75% in taxes compared to Metal.
- If you are importing Metal Drippers, consider if the 88.4% tax makes your product uncompetitive. Can you switch to Plastic or Ceramic?
β 2. Documentation Checklist
| Document | Requirement |
|---|---|
| Product Spec Sheet | Must clearly state Material Composition (e.g., "304 Stainless Steel," "Food-Grade PP Plastic," "Porcelain"). |
| Commercial Invoice | Describe item accurately: e.g., "Stainless Steel Coffee Dripper," not just "Filter Scoop." |
| Material Certificates | For Steel: Mill Certificates proving alloy composition. For Plastic: FDA/LFGB compliance if for food contact. |
β 3. Strategic Sourcing Advice
| Strategy | Recommendation |
|---|---|
| Cost Optimization | Switch to Plastic (3924.10.40.00) if product design allows. Saves 75% tax. |
| Premium Positioning | Ceramic (6911.10.80.90) is a middle ground (38.3% tax) and often perceived as higher-end than plastic. |
| Metal Avoidance | Avoid Metal (7323.99.90.30) unless brand value justifies the 88.4% tax burden. |
π 5. Common Mistakes & Pitfalls
β Mistake 1: Declaring a Stainless Steel Dripper as "Kitchen Utensil" without specifying material.
π Result: Customs will classify it as Steel (7323...) by default, leading to 88.4% tax.
β Mistake 2: Assuming all "Filters" are the same.
π Result: Plastic and Metal filters have vastly different HS Codes and tax rates.
β Mistake 3: Ignoring the Section 122 Clause.
π Result: For Steel products, the 50% Section 122 tariff is mandatory and non-negotiable.
β Correct Approach:
"Coffee Dripper, Plastic, Food-Grade PP, 2-Cup Capacity, Model XYZ"
β Use3924.10.40.00β Tax: 13.4%
π― 6. Conclusion: Optimize Your Supply Chain
π― Key Takeaway:
πΉ Plastic is King for Cost: 13.4% tax vs. 88.4% for Steel.
πΉ Ceramic is Queen for Balance: 38.3% tax, premium feel.
πΉ Steel is the Minefield: 88.4% tax due to Section 301 + Section 122.π Pro Tip:
If you are importing Metal Drippers, consider pre-clearance rulings or repackaging/assembly in a third country (if legal and compliant) to mitigate Section 122 tariffs. However, material change is the most effective strategy.
π£ Immediate Action:
π Verify Material: Confirm the exact material of your Dripper.
π Calculate Landed Cost:
- Metal: CIF + 88.4%
- Plastic: CIF + 13.4%
- Ceramic: CIF + 38.3%
π Choose the optimal HS Code to maximize profit!
β¨ Precise Classification Starts with Material Truth!
πΌ Your Margin Depends on Your HS Code!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.