Ethylene Polymer Mixture For Extrusion
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3919905060 | 40.8% | CN | US | Official Doc |
| 3920100000 | 39.2% | CN | US | Official Doc |
| 3920992000 | 39.2% | CN | US | Official Doc |
| 3919102055 | 40.8% | CN | US | Official Doc |
| 3901905501 | 41.5% | CN | US | Official Doc |
Product Images
AI Analysis
π§ͺ Ethylene Polymer Mixture For Extrusion
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: Do You Really Understand "Ethylene Polymer Mixture"?
Ethylene Polymer Mixtures are versatile plastic materials primarily used in industrial extrusion processes to create films, sheets, pipes, and profiles. In international trade, these mixtures (specifically Ethylene Copolymers) are classified based on their physical form and processing state. The key distinction lies in whether they are in their primary shape (granules/resins) or manufactured into films/sheets.
β οΈ Key Distinction Point:
- If the material is in the form of films, sheets, plates, or foils (already processed): It falls under Chapter 39, Heading 3919 (Self-adhesive) or 3920 (Other plates, sheets, film, foil, and strip).
- If the material is in the form of resins, granules, or powders (primary shape/raw material): It falls under Chapter 39, Heading 3901 (Ethylene polymers in primary forms).
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the specific HS Codes applicable to Ethylene Copolymers depending on their form:
| HS Code | Product Description | Applicable Form | Total Tax Rate | Tax Breakdown |
|---|---|---|---|---|
3919.90.50.60 |
Self-adhesive plates, sheets, film, foil, tape and other flat shapes, of plastics (Ethylene Copolymer Film) | Film Form (Other category) | 40.8% | Base: 5.8%, Section 301: 25.0%, Section 122: 10% |
3920.10.00.00 |
Other plates, sheets, film, foil and strip, of ethylene polymers | Film/Sheet Form (Ethylene Polymer specific) | 39.2% | Base: 4.2%, Section 301: 25.0%, Section 122: 10% |
3920.99.20.00 |
Other plates, sheets, film, foil and strip, of plastics (Ethylene Copolymer - Other category) | Film/Sheet Form (Other plastic category) | 39.2% | Base: 4.2%, Section 301: 25.0%, Section 122: 10% |
3919.10.20.55 |
Self-adhesive plates, sheets, film, foil, tape and other flat shapes, of plastics (Ethylene Copolymer Resin?) Note: Data implies resin classification logic | Resin/Raw Material Form (Primary shape) | 40.8% | Base: 5.8%, Section 301: 25.0%, Section 122: 10% |
3901.90.55.01 |
Ethylene polymers in primary forms (Ethylene Copolymer Resin) | Resin/Granule Form (Primary shape) | 41.5% | Base: 6.5%, Section 301: 25.0%, Section 122: 10% |
π Key Insight:
- Film Forms (3919.90,3920.10,3920.99): These are used when the ethylene mixture is already extruded into flat shapes. The tax rates hover around 39.2% - 40.8%.
- Primary Shape Forms (3901.90,3919.10): These apply to raw resins or granules. Surprisingly, the tax rate can be slightly higher (40.8% - 41.5%) due to higher base duties on certain resin sub-headings.
- Crucial Check: Ensure the physical form matches the HS Code. Sending granules but declaring as film (or vice versa) will lead to severe customs penalties.
π° III. 2026 Latest Tariff Rate Details (Including Surcharges & Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: 2025/2026 (Current trade policies)
π― 1. Film & Sheet Forms (HS Codes: 3919.90.50.60, 3920.10.00.00, 3920.99.20.00)
| Item | Content |
|---|---|
| Base Tariff | 4.2% - 5.8% (Ad Valorem) |
| Section 301 Tariff | +25.0% (High-risk category for US-China trade) |
| Section 122 Tariff | +10.0% (Additional surcharge on specific Chinese plastics) |
| Total Effective Tax | 39.2% - 40.8% |
| Tax Calculation | CIF Value Γ 39.2%~40.8% |
| De Minimis Exemption | β Not Applicable (De_minimis denied) |
| Legal Basis Path | USITC:3920.10.00.00 β FOOTNOTE:301 β FOOTNOTE:122 |
π Explanation:
- The 25% Section 301 tariff is the dominant cost driver for ethylene polymers from China.
- The 10% Section 122 tariff is an additional layer on top, making the total burden extremely high.
- Base duties vary slightly (4.2% vs 5.8%) depending on whether it's classified specifically as "Ethylene Polymers" (3920.10) or "Other Plastics" (3920.99/3919.90).
π― 2. Primary Form/Resin Forms (HS Codes: 3919.10.20.55, 3901.90.55.01)
| Item | Content |
|---|---|
| Base Tariff | 5.8% - 6.5% (Ad Valorem) |
| Section 301 Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Effective Tax | 40.8% - 41.5% |
| Tax Calculation | CIF Value Γ 40.8%~41.5% |
| De Minimis Exemption | β Not Applicable (De_minimis denied) |
| Legal Basis Path | USITC:3901.90.55.01 β FOOTNOTE:301 β FOOTNOTE:122 |
π Note:
- Even though these are raw materials, they face the same 25% + 10% surcharges.
- The base duty for resins (3901.90) is often higher (6.5%) than some film categories, leading to a higher total tax rate (41.5%).
- Risk: Misdeclaring resin as film to seek lower base rates is a common red flag for customs audits.
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
β 1. Required Documentation Checklist (Non-negotiable)
| Document | Must Provide | Explanation |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must clearly state: "Ethylene Copolymer," MFI (Melt Flow Index), Density, and Physical Form (Granule/Film). |
| β Material Safety Data Sheet (MSDS) | βοΈ | Required for chemical substances. Confirms no hazardous additives. |
| β Commercial Invoice | βοΈ | Must explicitly use the term "Ethylene Copolymer" and describe the form accurately. |
| β Packing List | βοΈ | Clearly distinguish between raw resin (bags) and finished film (rolls). |
| β Certificate of Origin (CO) | βοΈ | Essential for proving China origin (to apply correct Section 301/122 rates). |
| β Bill of Lading | βοΈ | Ensure HS Code matches the invoice description. |
β 2. Declaration Tips (Key Mnemonics)
π₯ "Form Dictates Code, Resin is High Cost, Film is Slightly Lower, Don't Mix Them Up!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Granules/Resins | 3901.90.55.01 (41.5%) |
Declaring as "Plastic Film" β Customs Seizure/Fine |
| Film Rolls | 3920.10.00.00 (39.2%) |
Declaring as "Resin" β Overpaying Tax |
| Self-Adhesive Film | 3919.90.50.60 (40.8%) |
Ignoring adhesive nature β Incorrect HS Code |
| Blends/Mixtures | Use "Copolymer" terminology | Vague terms like "Plastic Mix" β Audit Delay |
β 3. Special Situation Handling
| Situation | Handling Advice |
|---|---|
| Ethylene-Propylene Rubber (EPR) | If it's rubber, it may fall under Chapter 40. However, the data provided focuses on Plastics (Chapter 39). Confirm if it's thermoplastic (plastic) or elastomeric (rubber). |
| Recycled Ethylene Polymer | Still falls under Chapter 39. Ensure "Recycled" is stated, as it may trigger different environmental inspections but similar tax codes. |
| Masterbatch (Colored Resin) | If it's a mixture with pigments, it is still classified as Ethylene Polymer. Provide composition % to support the classification. |
π V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3920.10.00.00 / 3901.90.55.01 |
39.2% - 41.5% | None specific | High tariffs due to Sec 301 + 122. No de minimis. |
| π¨π³ China | 3920.10.00.00 |
4.2% - 5.8% | GB Standards | No Section 301/122. Much lower cost. |
| πͺπΊ EU | 3920.10.00 |
6.5% | REACH / RoHS | Standard MFN rates. No high add-on tariffs. |
| π²π½ Mexico | 3920.10.00 |
0% - 5% | NOM | USMCA may apply if rules of origin met. |
| π»π³ Vietnam | 3920.10.00 |
0% - 5% | Various | Potential for lower rates if processed locally. |
π Conclusion:
- USA is the most challenging market for Ethylene Polymers due to the ~40% total tax rate.
- EU and China offer significantly lower duty burdens.
- Supply chain diversification to Vietnam or Mexico may be considered for US-bound goods to mitigate Section 301/122 impacts, provided substantial transformation rules are met.
π VI. Common Errors & Pitfall Guide (Blood & Tears Lessons)
β Error 1: Declaring "Plastic Bag" for Ethylene Copolymer Film
π Consequence: Wrong HS Code (3923.21 vs 3920.10). High risk of audit and back taxes.
β Error 2: Mixing "Resin" and "Film" in one shipment without clear separation
π Consequence: Customs may reject the entry or assign the highest applicable tax rate to the entire shipment.
β Error 3: Ignoring Section 122 Tariff
π Consequence: Underpayment by 10%. PI (Porter Indemnity) or bond claims will follow.
β Error 4: Using vague terms like "Plastic Material"
π Consequence: Customs examiners will likely downgrade to a higher duty code or require extensive documentation, causing delays.
β Correct Approach:
"Ethylene Copolymer Film, Cast, Unoriented, 0.05mm thick, for Extrusion Lamination, China Origin"
π― VII. Conclusion: Professional Declaration, Cost Control, Efficiency!
π― Remember the Mnemonic:
πΉ "Resin or Film? Code is Key."
πΉ "China to USA? Prepare 40% Tax."
πΉ "Section 301 + 122 = 35% Surcharge."
π Pro Tip:
If you are importing Ethylene Copolymers into the US, budget for a total landed cost increase of ~40%.
Consider Advance Rulings (CBP Ruling) to confirm the specific HS Code for your exact product formulation.
For large volumes, explore bonded manufacturing or tariff engineering (e.g., importing resin and extruding domestically if feasible, though tax rates are similar, it might help with supply chain control).
π£ Immediate Action:
π Consult a licensed Customs Broker
π Prepare detailed Product Specs (MFI, Density, Form)
π Verify Section 301/122 applicability with your current supplier
β¨ Professional Clearance Starts with Precise Classification!
πΌ Your Cost Efficiency Depends on the HS Code You Choose!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.