Fiber Reinforced Tape Strip
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3919905020 | 40.8% | CN | US | Official Doc |
| 3926909989 | 22.8% | CN | US | Official Doc |
| 3926905500 | 40.1% | CN | US | Official Doc |
| 3919102010 | 40.8% | CN | US | Official Doc |
| 5603110070 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
π‘οΈ Fiber Reinforced Tape Strip
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: What exactly is "Fiber Reinforced Tape"?
Fiber Reinforced Tape Strip is a composite material product characterized by its structural integrity. It consists of a backing material (typically plastic/film) reinforced with fibers (glass, carbon, or synthetic) to increase tensile strength and tear resistance. In international trade, its classification hinges on two critical factors: 1. Material Composition: Is it primarily plastic (Chapter 39) or textile/non-woven (Chapter 56)? 2. Form Factor: Is it in rolls, strips, or sheets?
β οΈ Key Distinction:
- If the base is a plastic film/foil with fibers embedded for strength β Chapter 39 (Plastics)
- If the base is a non-woven fabric or textile strip with plastic coating β Chapter 56 (Non-wovens/Textiles)
π¦ II. HS Code Classification Details (2026 Latest Tariff Alignment)
Based on the provided data, here are the 5 potential HS Codes, categorized by material logic:
π Category A: Plastic-Based Reinforced Tape (Highest Match Likelihood)
| HS Code | Product Description | Logic & Summary | Total Tax |
|---|---|---|---|
| 3919.10.20.10 | Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls, containing fiber reinforcement | Perfect Match. The name "Fiber Reinforced" directly aligns with "fiber reinforced tape." It is a self-adhesive plastic tape. | 40.8% |
| 3919.90.50.20 | Other self-adhesive plates, sheets, film, foil, tape, strip... of plastics | Strong Match. "Fiber reinforced" and "tape" forms are consistent. Used if specific "fiber-reinforced" sub-category is unavailable or broader. | 40.8% |
𧡠Category B: Non-Woven/Textile-Based Reinforcement (Alternative Material)
| HS Code | Product Description | Logic & Summary | Total Tax |
|---|---|---|---|
| 5603.11.00.70 | Impregnated, coated, covered or laminated textile fabrics; Non-wovens, whether or not impregnated, coated, covered or laminated: Fibre strength β₯ 70 cN/tex... | Inferred Fit. Assumes material is artificial/synthetic filaments/non-woven. Fits "fiber-like" products without conflicting material/usage. | 35.0% |
| 5603.12.00.70 | Non-wovens, whether or not impregnated, coated, covered or laminated: Fibre strength < 70 cN/tex... | Inferred Fit. Based on "fiber" name, inferred as long-filament/fiber class. Tape is viewed as an application of non-woven products. | 35.0% |
| 3926.90.55.00 | Other articles of plastics and articles of other materials of headings 3901 to 3914: Containing textile fibers | Material Match. "Fiber" content matches "containing textile fibers." Tape is a common form in plastics/other materials. No obvious conflict. | 40.1% |
π Critical Note:
- Chapter 39 Codes (3919, 3926) generally apply if the primary character is plastic (e.g., fiberglass tape, carbon fiber tape with plastic backing).
- Chapter 56 Codes (5603) apply if the product is essentially a non-woven textile strip that has been impregnated or coated.
- Tax Difference: Chapter 56 codes offer a lower total tax (35.0%) compared to Chapter 39 (40.1% - 40.8%). Proper material identification is crucial for cost optimization.
π° III. 2026 Latest Tariff Rate Breakdown (Including Additional Duties)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: November 10, 2025 onwards
π― 1. 3919.10.20.10 & 3919.90.50.20 (Plastic-Based Reinforced Tape)
| Item | Detail |
|---|---|
| Base Rate | 5.8% |
| Section 301 Additional Duty | +25.0% |
| IEEPA Additional Duty | +10.0% (Specific to Chinese/HK origin products) |
| Total Effective Tax Rate | 40.8% |
| Calculation Basis | CIF Value Γ 40.8% |
| De Minimis Exemption | β Not Eligible (deny_de_minimis) |
| Legal Authority Path | IEEPA:9903.01.25 β Section 301 β USITC:3919.10.20.10 |
π Explanation:
- The 5.8% base duty is standard for plastic tapes.
- The 25% is the standard Section 301 tariff on Chinese plastics/chemicals.
- The 10% is the IEEPA surcharge.
- Total 40.8% is a high tariff bracket. Importers must budget accordingly.
π― 2. 3926.90.55.00 (Other Plastic Articles with Textile Fibers)
| Item | Detail |
|---|---|
| Base Rate | 5.1% |
| Section 301 Additional Duty | +25.0% |
| IEEPA Additional Duty | +10.0% |
| Total Effective Tax Rate | 40.1% |
| Calculation Basis | CIF Value Γ 40.1% |
| De Minimis Exemption | β Not Eligible |
| Legal Authority Path | IEEPA:9903.01.25 β Section 301 β USITC:3926.90.55.00 |
π Note:
- Slightly lower base rate (5.1% vs 5.8%) saves 0.7% on the base, but total remains high at 40.1%.
π― 3. 5603.11.00.70 & 5603.12.00.70 (Non-Woven/Textile Based)
| Item | Detail |
|---|---|
| Base Rate | 0.0% |
| Section 301 Additional Duty | +25.0% |
| IEEPA Additional Duty | +10.0% |
| Total Effective Tax Rate | 35.0% |
| Calculation Basis | CIF Value Γ 35.0% |
| De Minimis Exemption | β Not Eligible |
| Legal Authority Path | IEEPA:9903.01.25 β Section 301 β USITC:5603... |
π Cost Saving Alert:
- If your "Fiber Reinforced Tape" can be legally classified under Chapter 56 (e.g., it is fundamentally a non-woven fabric strip coated with plastic/fiber), you save 5.8% in total duty (35.0% vs 40.8%).
- Requirement: Must prove the primary material is non-woven textile, not plastic film.
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
β 1. Document Checklist (Mandatory)
| Document | Required | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must detail: Base material (Plastic vs. Non-woven), Fiber type (Glass/Carbon/Synthetic), Adhesive type, Thickness, Width. |
| β Material Composition Certificate | βοΈ | Crucial for distinguishing between Chapter 39 (Plastic) and Chapter 56 (Textile). |
| β Product Photos (Clear) | βοΈ | Show cross-section (to see fiber reinforcement) and roll/strip form. |
| β Commercial Invoice | βοΈ | Describe as "Fiber Reinforced Plastic Tape" or "Non-Woven Fiber Strip" per HS classification. |
| β Packing List | βοΈ | Weight and dimensions for CIF calculation. |
| β FCC/RoHS Compliance | βοΈ | If containing electronic components (unlikely for tape, but check adhesive properties). |
β 2. Declaration Strategy (Key Mantra)
π₯ "Material Determines Chapter, Form Determines Sub-Heading!"
| Scenario | Correct Declaration | Wrong Practice | Consequence |
|---|---|---|---|
| Plastic Film + Fiber Reinforcement | 3919.10.20.10 (Self-adhesive, fiber-reinforced) |
Declaring as "Fabric Tape" | Misclassification, 40.8% vs 35.0% gap, potential fines. |
| Non-Woven Fabric + Coating | 5603.11.00.70 |
Declaring as "Plastic Tape" | Underpayment of duty if actually plastic; overpayment if actually non-woven. |
| Generic "Reinforced Tape" | Specify Material | Using vague terms | Customs will classify under worst-case scenario (highest duty or detention). |
β 3. Special Handling Tips
| Situation | Recommendation |
|---|---|
| Glass Fiber Reinforced Tape (GFRP) | Definitely Chapter 39 (Plastics). Use 3919.10.20.10. |
| Carbon Fiber Tape | Definitely Chapter 39. Use 3919.10.20.10. |
| Non-Woven Interfacing Tape | Potentially Chapter 56. Use 5603.11.00.70 to save tax. |
| OEM Custom Tape | Provide design specs to prove material hierarchy. |
π V. Global Market Comparison (2026 Update)
| Country/Region | Recommended HS Code | Total Tax (China Origin) | Notes |
|---|---|---|---|
| πΊπΈ USA | 3919.10.20.10 |
40.8% | High Section 301 + IEEPA duties. |
| π¨π³ China | 3919.10.20.10 |
5.8% | Base rate only. No US-style additions. |
| πͺπΊ EU | 3919.10.20 |
~4.5% - 6% | Varies by specific national interpretation. No Section 301. |
| π¬π§ UK | 3919.10.20 |
~6.0% | Post-Brexit tariff. |
π Conclusion:
- USA is the most expensive market due to 40.8% total duty.
- Cost Optimization Strategy: If your product is structurally a non-woven fabric, declare under 5603 to achieve 35.0% duty. This is a 5.8% savings on high-value shipments.
π VI. Common Errors & Pitfalls (Lessons Learned)
β Error 1: Calling all "Tape" 3919.10 without checking material.
π Result: If it's non-woven, you pay 40.8% instead of 35.0%. Waste of money.
β Error 2: Using vague terms like "Industrial Tape" on Invoice.
π Result: Customs cannot verify material. Leads to HOLD for inspection, demurrage charges, and potential reclassification.
β Error 3: Ignoring "Fiber Reinforced" in description.
π Result: Missing the specific sub-heading 3919.10.20.10 which explicitly covers "fiber reinforced" products.
β Correct Practice:
Description: "Fiber Reinforced Self-Adhesive Tape, 100mm x 50m, Glass Fiber Embedded in Acrylic Backing, Roll Form"
HS Code:3919.10.20.10
Tax: 40.8%
π― VII. Conclusion: Precision Classification Saves Money!
π― Remember the Mantra:
πΉ "Plastic Base = 40.8%, Non-Woven Base = 35.0%."
πΉ "Fiber Reinforced" is a keyword for3919.10.20.10.
πΉ "Non-Woven" is a keyword for5603...(Lower Tax).
π Pro Tip:
If your "Fiber Reinforced Tape" is made of non-woven fabric coated with plastic, argue for Chapter 56. This saves $5,800 per $100,000 shipment.
Request an Advance Ruling (Preliminary Determination) from CBP if unsure.
π£ Immediate Action:
π Verify material composition with supplier.
π Prepare technical datasheet.
π Declare accurately to avoid 40.8% vs 35.0% pitfall!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Your Cost Control Depends on This 5% Difference!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.