Fiber Reinforced Tape Strong Glue
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3919102010 | 40.8% | CN | US | Official Doc |
| 5603110070 | 35.0% | CN | US | Official Doc |
| 5603120070 | 35.0% | CN | US | Official Doc |
| 3919905020 | 40.8% | CN | US | Official Doc |
| 3926905500 | 40.1% | CN | US | Official Doc |
Product Images
AI Analysis
𧬠Fiber Reinforced Tape Strong Glue
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: What Exactly is "Fiber Reinforced Tape"?
Fiber Reinforced Tape Strong Glue is an industrial-grade adhesive product designed for high-strength bonding, repairs, and sealing. Its key characteristics include:
- Material Structure: It consists of a backing material reinforced with fibers (such as fiberglass, polyester, or natural fibers) to provide tensile strength and tear resistance.
- Adhesive Component: Coated with a strong adhesive (often acrylic, rubber-based, or solvent-based) on one or both sides.
- Form Factor: Typically supplied in rolls (self-adhesive tape) for easy application.
β οΈ Key Classification Distinction:
- If the primary characteristic is the plastic/polymer backing with fibers acting as a tape β It falls under Chapter 39 (Plastics).
- If the primary characteristic is the textile/fiber structure itself, with adhesive being secondary β It may fall under Chapter 56 (Non-wovens/Fibrous materials).
- Note: In US customs practice, reinforced plastic tapes are often classified under Chapter 39, while purely textile tapes might fall under Chapter 56 or 59 depending on construction.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the four possible HS Codes and their corresponding logic:
| HS Code | Product Description | Classification Logic | Total Tax Rate |
|---|---|---|---|
3919.10.20.10 |
Self-adhesive plates, sheets, film, foil, tape, strip, and other forms of flat shapes, of plastics, whether or not in rolls. | Best Match: Explicitly matches "Fiber Reinforced Tape". The summary states: "Material enhancement 'fiber reinforced' fully matches... form fits roll self-adhesive tape features." | 40.8% |
3919.90.50.20 |
Other self-adhesive plates, sheets, etc., of plastics. | Good Match: Also fully matches material ("fiber reinforced") and form ("tape"). Considered a general category for plastic tapes. | 40.8% |
5603.11.00.70 |
Non-wovens, weighing β€ 25 g/mΒ², of synthetic filaments. | Inferred Match: Assumes material is synthetic filaments/non-woven. Summary notes: "Inferred material as artificial/synthetic filaments... non-woven/fibrous characteristics... no conflict." | 35.0% |
5603.12.00.70 |
Non-wovens, weighing > 25 g/mΒ², of synthetic filaments. | Inferred Match: Similar to above but for heavier non-wovens. Summary states: "Based on 'fiber' inference... conforms to non-woven fabric characteristics... tape is an application form of non-woven." | 35.0% |
3926.90.55.00 |
Other articles of plastics or of various materials of heading 39.01 to 39.14. | Alternative Match: Matches "contains textile fibers" and "tape form" under "Other" plastic articles. Summary: "Material matches 'contains textile fibers'... form matches tape... conforms to 'Other' category logic." | 40.1% |
π Critical Insight:
- Chapter 39 (3919/3926) is generally preferred for plastic-based reinforced tapes, which is the most common commercial form of "Fiber Reinforced Tape." - Chapter 56 (5603) applies if the tape is essentially a non-woven textile with adhesive coating. This usually results in a lower tax rate (35.0%) but requires proof that the fabric structure is dominant. - Risk: Misclassifying a plastic-based tape as textile (5603) may lead to audits, as customs may argue the plastic backing is the essential character.
π° III. 2026 Latest Tariff Rate Breakdown (Including Additional Duties, Policy Add-ons)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Time: From November 10, 2025 (including subsequent imports)
π― 1. 3919.10.20.10 & 3919.90.50.20 ββ Plastic Self-Adhesive Tapes
| Item | Content |
|---|---|
| Base Duty Rate | 5.8% |
| USITC Additional Duty (Section 301) | +25.0% |
| IEEPA Additional Duty (122 Clause) | +10.0% |
| Total Tax Rate | 40.8% |
| Tax Calculation | CIF Value Γ 40.8% |
| De Minimis Eligibility | β Not Eligible (High total rate exceeds de minimis thresholds for preferential treatment in many contexts) |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:3919.10.20.10 / 3919.90.50.20 β FOOTNOTE:301 |
π Explanation:
- The 5.8% base rate is standard for plastic tapes. - The 25% Section 301 duty applies to most Chinese plastic products. - The 10% IEEPA duty is applied specifically to Chinese goods under the "122 Clause" (often related to specific emergency powers or trade acts). - Combined 40.8% is a significant cost burden. Ensure your pricing strategy accounts for this.
π― 2. 5603.11.00.70 & 5603.12.00.70 ββ Non-Woven Synthetic Filament Products
| Item | Content |
|---|---|
| Base Duty Rate | 0.0% |
| USITC Additional Duty (Section 301) | +25.0% |
| IEEPA Additional Duty (122 Clause) | +10.0% |
| Total Tax Rate | 35.0% |
| Tax Calculation | CIF Value Γ 35.0% |
| De Minimis Eligibility | β Not Eligible (Still high total rate) |
| Legal Basis Path | IEEPA:9901.25 β IEEPA:9903.01.24 β USITC:5603.11.00.70 / 5603.12.00.70 |
π Note:
- If you can legitimately classify the product as a non-woven textile rather than a plastic tape, you save 5.8% on the base rate. - However, the 35% total rate is still substantial. You must provide technical documents proving the "fiber/non-woven" nature is the essential character, not the plastic backing.
π― 3. 3926.90.55.00 ββ Other Plastic Articles
| Item | Content |
|---|---|
| Base Duty Rate | 5.1% |
| USITC Additional Duty (Section 301) | +25.0% |
| IEEPA Additional Duty (122 Clause) | +10.0% |
| Total Tax Rate | 40.1% |
| Tax Calculation | CIF Value Γ 40.1% |
| De Minimis Eligibility | β Not Eligible |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:3926.90.55.00 |
π Comparison:
- This code is a fallback for plastic articles not elsewhere specified. The rate (40.1%) is slightly lower than 3919 (40.8%) but carries higher classification risk if the product is clearly a "tape."
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
β 1. Preparation Checklist (Must-Have Documents)
| Document | Required | Explanation |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must detail: Material composition (% fiber, % plastic, adhesive type), tensile strength, thickness, roll dimensions. |
| β Technical Data Sheet (TDS) | βοΈ | Proves if the product is "Plastic Tape" (Ch 39) or "Non-Woven" (Ch 56). Critical for classification argument. |
| β Product Photos (Clear) | βοΈ | Show cross-section, adhesive side, and fiber structure. |
| β Commercial Invoice | βοΈ | Clearly state "Fiber Reinforced Self-Adhesive Tape, For Industrial Use." Avoid vague terms like "Strong Glue Tape." |
| β Packing List | βοΈ | Include net/gross weight, number of rolls. |
| β Certificate of Origin (CO) | βοΈ | Required for Section 301 duty determination. |
β 2. Classification Strategy (Key Tips)
π₯ "Confirm Material First, Then Form. Plastic = Ch 39, Textile = Ch 56."
| Scenario | Recommended HS Code | Reason |
|---|---|---|
| Plastic backing + Fiber reinforcement + Adhesive | 3919.10.20.10 |
Most common. Plastic is the essential character. |
| Textile/Non-woven backing + Adhesive | 5603.11.00.70 / 5603.12.00.70 |
Only if no plastic film is present. |
| Ambiguous Product | 3919.90.50.20 |
Safe fallback for plastic tapes, but ensure documentation supports it. |
β οΈ Warning:
- Do NOT misdeclare a plastic-based tape as a non-woven textile to save 5.8%. Customs can test the material. If found to be plastic, you face penalties, back taxes, and delays. - If the product is predominantly fiber (e.g., cloth tape with plastic coating), argue for Chapter 56/59. If predominantly plastic (e.g., fiberglass mesh with plastic coating), argue for Chapter 39.
β 3. Special Cases Handling
| Case | Handling Advice |
|---|---|
| Multi-Layer Tape | Provide layer-by-layer composition. Customs will look at the "essential character" layer. |
| Adhesive Type | Specify if it's solvent-based, water-based, or hot-melt. Some adhesives may require additional EPA/OSHA compliance, but not HS classification. |
| Industrial vs. Consumer | If marketed for heavy industrial use, emphasize "reinforcement" and "high tensile strength" to support Ch 39 classification. |
| Samples | Always ship samples with documentation for pre-clearance review if uncertain. |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Estimated Total Duty | Notes |
|---|---|---|---|
| πΊπΈ USA | 3919.10.20.10 |
40.8% | High duties due to Section 301 + IEEPA. |
| π¨π³ China | 3919.10.20.10 |
5-10% | Low base duty, no Section 301. |
| πͺπΊ EU | 3919.10.90 |
4-6% | Standard EU duty for plastic tapes. No major additional tariffs. |
| π¬π§ UK | 3919.10.90 |
4-6% | Post-Brexit, similar to EU rates. |
| π¨π¦ Canada | 3919.10.10 |
5-10% | Lower than US, but check CUSMA eligibility. |
π Conclusion:
- USA is the most expensive market for this product due to multiple additional tariffs. - EU and Canada offer significantly lower duty burdens. - Consider supply chain diversification (e.g., sourcing from Vietnam or Thailand) if US market access is critical, as these countries may not be subject to the same additional duties.
π VI. Common Mistakes & Pitfall Guide (Lessons Learned)
β Mistake 1: Classifying as 5603 (Non-woven) for a plastic-backed tape.
π Consequence: Customs audit, reclassification to 3919, back taxes + interest + penalty.
β Mistake 2: Omitting "Fiber Reinforced" in the description.
π Consequence: Customs may classify as generic tape (3919.90.00), which might have different duty rates or scrutiny.
β Mistake 3: Not providing technical data for adhesive content.
π Consequence: Delay in clearance if customs questions the "plastic" vs. "textile" nature.
β Mistake 4: Ignoring IEEPA 10% duty.
π Consequence: Underpayment of duty, leading to seizure or fines.
β Correct Approach:
"Fiber Reinforced Self-Adhesive Tape, Plastic Backing with Fiberglass Mesh, Acrylic Adhesive, 12-inch x 50 yards, Industrial Grade."
π― VII. Conclusion: Professional Classification Saves Money!
π― Remember:
πΉ "Plastic Base = Ch 39 (40.8%) | Textile Base = Ch 56 (35.0%)"
πΉ "Documentation is Key: TDS + Photos + Specs"
πΉ "US Market = High Duty Plan Ahead"
π Pro Tip:
If your tape is made in Vietnam, Mexico, or Thailand, you may avoid the Section 301 25% duty and IEEPA 10% duty, potentially reducing the total rate to ~5-10% (depending on local free trade agreements).
Consider pre-classification ruling (Ruling Letter) from CBP if the product structure is complex.
π£ Immediate Action:
π Consult with a licensed customs broker + Provide technical data sheet + Apply for HS Code Ruling if unsure.
π Clear your goods smoothly, control costs, and boost profits!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Every cent of duty cost matters!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.