Foldable Lid
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3923500000 | 40.3% | CN | US | Official Doc |
| 3923900080 | 38.0% | CN | US | Official Doc |
| 7323999080 | 88.4% | CN | US | Official Doc |
| 7323999030 | 88.4% | CN | US | Official Doc |
Product Images
AI Analysis
π Foldable Lid (Flexible Packaging Closures)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Strategy
π I. Product Definition & Classification: What is a "Foldable Lid"?
A "Foldable Lid" in the context of international trade usually refers to plastic closures, lids, caps, or stoppers used for packaging goods, or potentially metal kitchen/tableware components if made of iron/steel. However, given the commonality in consumer goods and packaging, the most likely classification falls under Plastics (Chapter 39) or Iron/Steel Articles (Chapter 73).
The classification strictly depends on the material and specific function:
- Plastic Foldable Lids/Caps: Used for bottles, jars, containers, food packaging.
- Iron/Steel Foldable Lids: Used for kitchenware, food containers, or industrial packaging.
β οΈ Critical Distinction:
- If made of Plastic β Refer to HS 3923 series.
- If made of Iron/Steel β Refer to HS 7323 series.
- Note: The provided DATA only contains HS codes for Plastics (3923) and Iron/Steel (7323). No other materials are included.
π¦ II. HS Code Classification Details (Based on Provided DATA)
Below are the exact HS Codes and Tax Rates from the provided data for "Foldable Lids" depending on material.
β Case 1: Made of PLASTICS (Most Common for "Foldable" Packaging Lids)
| HS Code | Product Description | Key Characteristics | Tax Rate (Total) |
|---|---|---|---|
| 3923.50.00.00 | Stoppers, lids, caps and other closures (of plastics) | Specific classification for closures like flip-top lids, screw caps, foldable seals. | 0.0% |
| 3923.90.00.80 | Other articles for conveyance or packing of goods (of plastics) | If the "foldable lid" is considered a general packing article not specifically a "stopper/cap" (e.g., a flexible film lid seal). | 28.0% |
π Clarification:
- "Stoppers, lids, caps" (HS 3923.50.00.00) is the preferred classification for standard packaging lids.
- "Other" (HS 3923.90.00.80) applies if the item is not clearly a "cap/stopper" but a general packing component.
- Tax Difference: 0% vs. 28%. Correct classification is critical to save 28% tariff.
β Case 2: Made of IRON or STEEL (Kitchen/Household Items)
| HS Code | Product Description | Key Characteristics | Tax Rate (Total) |
|---|---|---|---|
| 7323.99.90.30 | Kitchen or tableware suitable for food or drink contact (of iron/steel) | If the "foldable lid" is part of a kitchen container, tea caddy, or food storage tin. | 78.4% |
| 7323.99.90.80 | Other (of iron/steel) | If the lid is not specifically "kitchen/tableware" (e.g., industrial packaging lid). | 78.4% |
π Clarification:
- Both iron/steel options have the same total tax rate (78.4%).
- The distinction is only for statistical or specific duty purposes, but cost-wise, itβs identical.
- High Tariff Warning: 78.4% includes Base (3.4%) + Additional (25% or 50% depending on specific steel/aluminum/copper rules).
π° III. 2026 Latest Tariff Rate Breakdown (US Import)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: As per provided data (includes additional tariffs)
π― 1. Plastic Foldable Lid: 3923.50.00.00
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Calculation | CIF Value Γ 0% = $0 |
| De Minimis Eligible? | β Yes (Likely eligible if under $800, but check specific FDA/Packaging regulations) |
| Legal Basis | Standard USHTS for Plastic Closures |
π Explanation:
- Plastic closures are often duty-free due to low base tariffs.
- No additional 25% or 50% tariff applies to this specific HS code in the provided data.
- Advantage: Zero tariff makes this highly competitive.
π― 2. Plastic Foldable Lid: 3923.90.00.80
| Item | Content |
|---|---|
| Base Tariff | 3.0% |
| Additional Tariff | 25.0% |
| Total Tax Rate | 28.0% |
| Calculation | CIF Value Γ 28% |
| De Minimis Eligible? | β No (Likely subject to Section 301 tariffs) |
| Legal Basis | USHTS Section 301 Additional Tariffs |
π Explanation:
- If misclassified as "Other" instead of "Stoppers/Lids/Caps", you pay 28%.
- Risk: Overpaying 28% tariff unnecessarily.
π― 3. Iron/Steel Foldable Lid: 7323.99.90.30 / 7323.99.90.80
| Item | Content |
|---|---|
| Base Tariff | 3.4% |
| Additional Tariff | 25.0% (or 50% for Steel/Aluminum/Copper) |
| Total Tax Rate | 78.4% |
| Calculation | CIF Value Γ 78.4% |
| De Minimis Eligible? | β No |
| Legal Basis | Section 301 + Steel/Aluminum 232 Tariffs |
π Explanation:
- Extremely High Tariff.
- The "78.4%" combines base duty + Section 301 (25%) + Steel/Aluminum (50%).
- Strategic Note: Avoid importing iron/steel lids from China if possible, or seek exemptions.
π οΈ IV. Customs Clearance Practical Advice (Avoid Pitfalls)
β 1. Preparation Checklist
| Document | Required? | Notes |
|---|---|---|
| β Product Specifications | βοΈ | Must state Material (Plastic vs. Steel), Function (Lid/Cap), and Usage. |
| β Photos | βοΈ | Clear images showing the "foldable" mechanism and how it attaches to containers. |
| β Commercial Invoice | βοΈ | Description must be precise: "Plastic Flip-Top Lids for Packaging" or "Steel Container Lids". |
| β Material Declaration | βοΈ | Explicitly state "Polypropylene (PP)" or "Stainless Steel" to justify HS Code. |
| β FDA Registration (if plastic + food contact) | βοΈ | If lids contact food, FDA compliance is mandatory for US import. |
β 2. Classification Tips (Key Mnemonic)
π₯ "Plastic Lids are 0%, Steel Lids are 78%!"
| Scenario | Correct HS Code | Tax Rate | Action |
|---|---|---|---|
| Plastic Lid for Bottle/Jar | 3923.50.00.00 |
0.0% | β Use this! |
| Plastic Seal/Film Lid (not cap) | 3923.90.00.80 |
28.0% | β Avoid if possible; reclassify if feasible. |
| Steel Lid for Kitchen Container | 7323.99.90.30 |
78.4% | β οΈ High cost; consider plastic alternative. |
| Steel Lid for Industrial Drum | 7323.99.90.80 |
78.4% | β οΈ High cost. |
π Important:
- If the lid is removable and specifically designed to close a container, it is a "Stopper, Lid, or Cap" β HS 3923.50.00.00 (for plastic).
- Do NOT classify plastic lids as "Other packing articles" (3923.90.00.80) unless they are non-closing seals.
β 3. Special Cases
| Case | Handling Advice |
|---|---|
| Food Contact Plastic Lids | Ensure FDA 21 CFR compliance. Provide Certificate of Compliance. |
| Mixed Shipments (Plastic + Steel) | Declare separately. Do not mix HS codes on one line item. |
| OEM Custom Lids | Provide mold designs if requested; ensure material composition is clear. |
| "Foldable" Mechanism | Emphasize functionality in description. If itβs a hinged lid attached to a container, it may still be a "Lid" (HS 3923.50) if separable. If permanently attached, it might be part of the container (different HS). |
π V. Global Market Comparison (2026)
| Country/Region | Recommended HS Code (Plastic) | Tariff Rate | Notes |
|---|---|---|---|
| πΊπΈ USA | 3923.50.00.00 |
0.0% | Duty-free for plastic closures. |
| π¨π³ China | 3923.50.00.00 |
~5-7% | Lower base tariff; no US-style additional tariffs. |
| πͺπΊ EU | 3923.50.00 |
~3-4% | Standard EU duty for plastic caps/lids. |
| π¬π§ UK | 3923.50.00 |
~3-4% | Post-Brexit rules apply; similar to EU. |
π Conclusion:
- USA is the most favorable for Plastic Lids (0% tariff).
- Iron/Steel Lids are heavily taxed globally due to trade remedies, but especially in the US (78.4%).
π VI. Common Mistakes & Pitfalls
β Mistake 1: Classifying plastic lids as "Other Plastic Articles" (3923.90.00.80)
π Result: Pay 28% instead of 0%.
β
Fix: Use 3923.50.00.00 for any lid/cap/stopper.
β Mistake 2: Calling a steel kitchen lid a "General Metal Part"
π Result: Still taxed at 78.4%.
β
Fix: Acknowledge high tariff; explore plastic alternatives or third-country sourcing.
β Mistake 3: Not declaring material composition
π Result: Customs may classify as highest-duty option.
β
Fix: Always state "Material: Polypropylene (Plastic)" or "Stainless Steel".
π― VII. Final Recommendation
- If Plastic: Use HS Code
3923.50.00.00. - Tax: 0%.
- Benefit: Maximize profit, simplify clearance.
-
Requirement: FDA compliance if food-contact.
-
If Steel/Iron: Use HS Code
7323.99.90.30or7323.99.90.80. - Tax: 78.4%.
-
Strategy: Highly discouraged for China-origin goods unless exempt. Consider sourcing from Vietnam/Mexico for lower tariffs.
-
Documentation:
- Clear description: "Plastic Foldable Flip-Top Lid".
- Material: "100% Polypropylene".
- Function: "For packaging closure".
π Pro Tip:
πΉ "Plastic Lids = 0% Tax. Steel Lids = 78.4% Tax. Choose wisely!"
πΉ "Always classify plastic lids as 'Stoppers/Lids/Caps' (3923.50) to save 28%!"
π£ Immediate Action:
β Verify material.
β Use HS 3923.50.00.00 for plastic.
β Ensure FDA compliance for food-contact plastics.
β Avoid steel lids from China unless tariff-absorbent.
β¨ Smart Classification Saves Money!
πΌ 0% Tax on Plastic? Donβt Leave It Behind!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.