Foldable Phone Stand
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7326908688 | 87.9% | CN | US | Official Doc |
| 7326908635 | 87.9% | CN | US | Official Doc |
| 3926908800 | 0.0% | CN | US | Official Doc |
| 3926909989 | 22.8% | CN | US | Official Doc |
| 8517790000 | 67.5% | CN | US | Official Doc |
| 8517710000 | 67.5% | CN | US | Official Doc |
Product Images
AI Analysis
π± Foldable Phone Stand (ζζΊζε ζ―ζΆ)
π HS Code Reference & Customs Clearance Guide | 2024 Latest Tariff Analysis | Professional Entry Strategy
π I. Product Definition & Classification: Do You Really Know Your "Stand"?
A Foldable Phone Stand is an accessory designed to hold mobile devices (smartphones, tablets) at an ergonomic viewing angle. In international trade, its classification depends heavily on the primary material and specific design features.
Key Material Distinction: - Plastic Polymer Stands: Most common for consumer electronics accessories. Typically fall under Chapter 39. - Metal (Steel/Iron) Stands: Durable, often used in industrial or heavy-duty contexts. Typically fall under Chapter 73.
β οΈ Critical Classification Point:
- If made of plastics (ABS, PC, etc.) β Look at Heading 3926.
- If made of iron/steel β Look at Heading 7326.
- Note: Electronic smart stands (with charging/bluetooth) might fall under Chapter 85, but standard passive stands are non-electronic.
π¦ II. HS Code Classification Details (Based on Provided Data)
Below are the specific HS Codes from the provided dataset, mapped to their tax implications.
| HS Code | Product Description | Material | Primary Use Case |
|---|---|---|---|
3926.90.88.00 |
Other articles of plastics: Other | Plastic | Standard foldable plastic stands (implied by description) |
3926.90.99.89 |
Other articles of plastics: Other | Plastic | General plastic articles (fallback if not specifically "other") |
7326.90.86.88 |
Other articles of iron or steel: Other | Iron/Steel | Metal foldable stands |
7326.90.86.35 |
Other articles of iron or steel: Fence posts, studded... | Iron/Steel | Note: This code mentions "fence posts." Only relevant if the stand has studded/corrugated features resembling fence posts (unlikely for phone stands, but included in data). |
π Data Constraint Note:
The dataset provided does not contain specific HS codes for "parts of telephones" (Chapter 85) that are exclusively stands, nor does it provide successful tax retrieval for3926.90.88.00. However, based on standard trade practice and the provided text: - Plastic stands are typically classified under3926.90(Other articles of plastics). - Metal stands are typically classified under7326.90(Other articles of iron or steel).
π° III. 2024 Latest Tariff Rate Details (Including Additional Taxes)
β Applicable Region: United States (US)
β Origin: China (CN) (Inferred from tax details provided in data)
β Effective Date: Current policies apply
π― 1. 3926.90.88.00 ββ Foldable Plastic Phone Stands
| Item | Content |
|---|---|
| Base Tariff | Failed to retrieve tax information (Data Error) |
| Additional Tax (Section 301) | Typically 25% for many plastic goods from China |
| Total Tax | Error / Unknown |
| Tax Calculation | CIF Γ (Base + Additional) |
| Recommendation | Verify with Customs Broker: Since the data shows "Error," you must obtain a pre-ruling or check the latest USITC database. Assume a high tariff risk until confirmed. |
π Explanation:
- The provided data explicitly states:"Failed to retrieve tax information"for3926.90.88.00.
- However, other plastic goods in the dataset (3926.90.99.89) show a total tax of 12.8% (5.3% base + 7.5% additional).
- Risk Warning: Do not assume the same rate. Plastic electronic accessories are often targeted by Section 301 tariffs.
π― 2. 3926.90.99.89 ββ Other Plastic Articles
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| Additional Tax (Section 301) | +7.5% |
| Total Tax | 12.8% |
| Tax Calculation | CIF Γ 12.8% |
| Legal Basis | Standard Section 301 additional duty for certain Chinese imports |
π Note:
- This code is a "catch-all" for plastic articles not elsewhere specified.
- If your product is not clearly identified as3926.90.88.00, customs may default to this or a similar code, resulting in a 12.8% total duty.
π― 3. 7326.90.86.88 ββ Other Articles of Iron or Steel
| Item | Content |
|---|---|
| Base Tariff | 2.9% |
| Additional Tax (Section 301) | +25.0% |
| Special Add-on (Steel/Aluminum) | +50% (Steel, Aluminum, Copper products surcharge) |
| Total Tax | 77.9% |
| Tax Calculation | CIF Γ 77.9% |
| Legal Basis | IEEPA + USITC + Steel/Aluminum Reciprocal Duties |
π Critical Warning:
- If your stand is made of metal (iron/steel), the tariff is EXTREMELY HIGH (77.9%).
- The breakdown is: 2.9% Base + 25% Section 301 + 50% Steel/Aluminum Surcharge = 77.9%.
- Recommendation: Avoid metal construction for this product if exporting to the US. Use plastic to mitigate tax burden.
π― 4. 7326.90.86.35 ββ Studded Fence Posts (Unlikely Match)
| Item | Content |
|---|---|
| Total Tax | 77.9% |
| Description | Fence posts with corrugations/knobs |
| Relevance | Very Low for phone stands unless the stand has decorative studded features mimicking fence posts. |
π Note: Same tax rate as above (77.9%) due to steel/aluminum surcharge.
π οΈ IV. Customs Clearance Practical Advice (Avoid Pitfalls)
β 1. Material Declaration is Key
| Material | Recommended HS Code (from data) | Total Tax Risk | Clearance Strategy |
|---|---|---|---|
| Plastic | 3926.90.88.00 (Preferred) or 3926.90.99.89 |
12.8% - Unknown | - Declare as "Foldable Phone Stand, Plastic." - Provide photos showing no metal components. - Confirm tax rate with broker due to data error. |
| Metal | 7326.90.86.88 |
77.9% | - Strongly Advised Against for US export due to high cost. - If unavoidable, ensure product is strictly "non-fence post" style to avoid misclassification. |
β 2. Documentation Checklist
| Document | Required? | Purpose |
|---|---|---|
| β Product Photos | βοΈ | To prove material (Plastic vs. Metal) and design (Foldable, no electronics). |
| β Material Composition Statement | βοΈ | Explicitly state "100% ABS Plastic" or "Stainless Steel." |
| β Function Description | βοΈ | "Passive device for holding smartphones; no electrical components." |
| β Commercial Invoice | βοΈ | Clearly describe item as "Foldable Phone Stand." |
β 3. Common Misclassifications to Avoid
β Error 1: Classifying a plastic stand under Chapter 85 (Telephone parts).
π Consequence: May be rejected if it's not a functional part of a telephone (e.g., not a charging dock). Use Chapter 39 instead.
β Error 2: Classifying a metal stand under Chapter 73 without declaring steel/aluminum status.
π Consequence: 77.9% tax vs. potential lower tax if misclassified (risk of penalty). Be transparent.
β Error 3: Ignoring the "Foldable" aspect.
π Consequence: If it's rigid, it might be considered "furniture" or "accessory" under different codes. "Foldable" helps justify accessory status.
π V. Global Market Comparison (Quick Reference)
| Market | Recommended HS Code | Approx. Tariff | Notes |
|---|---|---|---|
| πΊπΈ USA | 3926.90.99.89 (if plastic) |
12.8% | Avoid metal (77.9%). Plastic code 3926.90.88.00 has unknown tax in data. |
| π¨π³ China | 3926.90.90.00 |
5-6% | Standard plastic accessory rate. |
| πͺπΊ EU | 3926.90.97 |
0-4% | Often duty-free for plastic goods under certain FTAs. |
| π¬π§ UK | 3926.90.90 |
0-6% | Post-Brexit rules vary; check UK Global Tariff. |
π VI. Conclusion & Strategic Recommendation
π― Key Takeaway:
- Material Matters Most: For US exports, Plastic is significantly more tax-efficient (~12.8%) compared to Metal (77.9%).
- Data Uncertainty: The tax for 3926.90.88.00 (likely the most accurate code for plastic stands) is marked as "Error" in the provided data. Do not assume 0% tax.
β
Action Plan:
1. Switch to Plastic: If currently using metal, switch to high-quality ABS/PC plastic to save 65%+ in tariffs.
2. Verify Plastic Tax: Contact a customs broker to confirm if 3926.90.88.00 or 3926.90.99.89 applies and get the exact rate.
3. Clear Description: Declare as "Foldable Phone Stand, Plastic, No Electronics" to avoid Chapter 85 complications.
β¨ Smart Clearance Starts with Smart Material Choice!
πΌ Save 65% in Tariffs by Choosing Plastic Over Steel!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.