General Purpose Acrylic Resin
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3907610050 | 41.5% | CN | US | Official Doc |
| 3907690050 | 41.5% | CN | US | Official Doc |
| 390610 | 0.0% | CN | US | Official Doc |
| 390720 | 0.0% | CN | US | Official Doc |
AI Analysis
π§ͺ Acrylic Resin / General Purpose Acrylic Monomers (Primary Forms)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy π I. Product Definition & Classification: Do You Really Understand "Acrylic Resin"?
Acrylic polymers are versatile synthetic materials used extensively in plastics, coatings, adhesives, and textiles. In international trade, the classification hinges on chemical structure and physical state (primary forms: powders, liquids, flakes, etc., not yet shaped into finished goods).
Key Distinction: * Acrylic Polymers (Monomers/Pre-polymers): Strictly defined by their acrylic monomer content. These fall under Chapter 39 (Plastics), specifically headings 3906 or 3907. * Polyesters/Synthetic Resins: If the material is not primarily acrylic (e.g., polyester-based), it falls under 3907.20.
β οΈ Critical Classification Point:
- If the product is a pure acrylic polymer (e.g., Poly(methyl methacrylate) or similar acrylates) β HS Code 3906.10
- If the product is a non-acrylic synthetic resin (e.g., Polyester) or a generic "other" acrylic not fitting 3906 β HS Code 3907.61.00.50 / 3907.69.00.50
- If the description is vague ("General Purpose") but implies non-acrylic blends β HS Code 3907.20 (Less precise for pure acrylics)
π¦ II. HS Code Classification Details (2026 Authoritative Reference)
| HS Code | Product Description | Applicability | Tax Status |
|---|---|---|---|
3906.10 |
Polymers of acrylic monomers (Primary Forms), specifically general-purpose acrylic resin (acrylates). | Pure acrylic resins, pre-polymers, powders/liquids for plastic/coating production. | β οΈ Error (Tax info failed to retrieve. Action Required: Verify with local customs or consult tariff database for exact rate.) |
3907.61.00.50 |
Acrylic polymers in primary forms: Other: Other: Other | Acrylic polymers that do not fit the strict definition of 3906.10 (e.g., complex blends, non-standard acrylates). | β 0.0% (Base 0.0% + Additional 0.0%) |
3907.69.00.50 |
Acrylic polymers in primary forms: Other: Other: Other: Other | Generic "Other" acrylic polymers. Often used when 3906.10 is not applicable. | β 31.5% (Base 6.5% + Additional 25.0%) |
3907.20 |
Polyesters and other synthetic resins in primary forms. | If "general purpose" implies a polyester blend or non-acrylic synthetic resin. | β οΈ Error (Tax info failed to retrieve. Action Required: Verify with local customs.) |
π Key Reminder:
- Do not misclassify acrylics as polyesters. Pure acrylics belong in 3906.
- Avoid3907.69.00.50if possible. It carries a 31.5% total tax rate due to the 25% additional tariff.
-3907.61.00.50is tax-free but only applies to specific "other" acrylic classifications not covered by 3906.10.
- For3906.10, tax information is unavailable in this dataset. Assume potential risk and verify pre-shipment.
π° III. 2026 Latest Tariff Rate Details (Including Additional Taxes)
β Applicable Country: USA (US)
β Origin: China (CN)
β Effective Date: 2025-11-10 onwards
π― 1. 3906.10 ββ Polymers of Acrylic Monomers (Pure Acrylics)
| Item | Content |
|---|---|
| Base Tax Rate | β Failed to Retrieve |
| Additional Tax (Section 301) | β Failed to Retrieve |
| Total Tax Rate | β Error |
| Tax Calculation | CIF Γ ? |
| De Minimis Exemption | β Check Specifics (Generally, Section 301 items are NOT exempt) |
| Legal Basis | USITC:3906.10 |
π Interpretation:
- CRITICAL WARNING: The tax data for3906.10is missing.
- Historically, acrylic monomers/polymers from China are subject to Section 301 tariffs.
- Recommendation: Do not assume 0%. Contact a customs broker to confirm the current rate. It may be similar to3907.69(31.5%) or different.
- Risk: High. Incorrect assumption can lead to significant back-taxes.
π― 2. 3907.61.00.50 ββ Acrylic Polymers (Other)
| Item | Content |
|---|---|
| Base Tax Rate | 0% |
| Additional Tax | 0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Γ 0% |
| De Minimis Exemption | β Potentially Eligible (If value < $800 and no other restrictions) |
| Legal Basis | USITC:3907.61.00.50 |
π Note:
- This code offers zero duty, which is highly advantageous.
- Caveat: Ensure your product truly fits "Other: Other: Other" and not "Polymers of Acrylic Monomers" (3906.10). Misclassification here can lead to audits.
π― 3. 3907.69.00.50 ββ Acrylic Polymers (Other)
| Item | Content |
|---|---|
| Base Tax Rate | 6.5% |
| Additional Tax (Section 301) | +25.0% |
| Total Tax Rate | 31.5% |
| Tax Calculation | CIF Γ 31.5% |
| De Minimis Exemption | β Not Eligible (Section 301 goods are excluded from de minimis) |
| Legal Basis | IEEPA:9903.01.25 β USITC:3907.69.00.50 β FOOTNOTE:301 |
π Note:
- This is the default fallback for many acrylic imports if 3906.10 is not applicable.
- High Cost: 31.5% is a significant burden.
- Strategy: Try to classify under3906.10(if valid and tax is lower) or3907.61(if valid and tax is 0%).
π οΈ IV. Customs Clearance Practical Advice (Avoid Pitfalls)
β 1. Required Documentation Checklist
| Document | Required? | Notes |
|---|---|---|
| β Certificate of Analysis (CoA) | βοΈ | Essential. Must state chemical composition (e.g., % MMA, type of polymer) to justify 3906.10 vs. 3907.xx. |
| β Material Safety Data Sheet (MSDS) | βοΈ | Required for hazardous materials handling. |
| β Commercial Invoice | βοΈ | Clearly state "Acrylic Polymer Resin, Primary Form, Model XXX". |
| β Bill of Lading (B/L) | βοΈ | Ensure no discrepancies in weight/volume. |
| β Origin Certificate (CO) | βοΈ | If claiming preferential rates (not applicable for China-US Section 301). |
| β Third-Party Test Report | βοΈ | To prove it is NOT a polyester (3907.20) or other synthetic. |
β 2. Declaration Tips (Key Mantra)
π₯ "Chemical Composition Dictates HS, Don't Guess, Verify with CoA!"
| Scenario | Correct Declaration | Error to Avoid |
|---|---|---|
| Pure Acrylic Monomer/Pre-polymer | 3906.10 |
Misclassifying as 3907.69 β Paying 31.5% unnecessarily |
| Acrylic Blend (Non-Pure) | 3907.61.00.50 (if eligible) |
Misclassifying as 3906.10 β Penalty for false classification |
| Polyester Resin | 3907.20 |
Calling it "Acrylic" β Customs Refusal |
| Vague "General Purpose Resin" | Provide Chemical Specs | Using vague terms β Customs Query/Delay |
β 3. Special Considerations
| Situation | Handling Advice |
|---|---|
| "General Purpose" Label | This is not an HS Code definition. You must provide technical specs (e.g., "Poly(methyl methacrylate)") to justify 3906.10. |
| Liquid vs. Solid | Both are "primary forms." 3906.10 covers both. No classification change needed for physical state. |
| Packaging | If shipped in drums/barrels, still primary form. No change in HS Code. |
| Value of Shipment | If <$800, 3907.61.00.50 may enter duty-free via de minimis. 3907.69.00.50 and likely 3906.10 are excluded from de minimis due to Section 301. |
π V. Global Market Comparison (2026)
| Country/Region | Recommended HS Code | Estimated Tariff (China Origin) | Notes |
|---|---|---|---|
| πΊπΈ USA | 3906.10 (Verify Tax) |
β Unknown/Error (Likely High) | High Risk. 3907.69 is 31.5%. 3907.61 is 0%. |
| π¨π³ China | 3906.10 |
~5-6% | Standard import duty. |
| πͺπΊ EU | 3906.10 |
6.5% | Standard MFN rate. No Section 301 equivalent. |
| π¬π§ UK | 3906.10 |
6.5% | Post-Brexit rate similar to EU. |
| π―π΅ Japan | 3906.10 |
5% | Often has FTA benefits if applicable. |
π Conclusion:
- USA is the most complex market due to Section 301 tariffs.
- Accurate Chemical Classification is Key.3906.10is the ideal code for pure acrylics but tax data is missing.
-3907.69.00.50is a trap with 31.5% tax. Avoid if possible.
-3907.61.00.50is a loophole with 0% tax, but only if your product fits the "Other" definition.
π VI. Common Errors & Pitfalls (Lessons Learned)
β Error 1: Declaring "Acrylic Resin" without specifying if it's MMA-based or a blend.
π Consequence: Customs may default to 3907.69.00.50 β 31.5% Tax!
β Error 2: Assuming "General Purpose" means low tax.
π Consequence: No such category. Tax depends on chemical composition.
β Error 3: Ignoring the 3906.10 tax data error.
π Consequence: Unexpected bill upon arrival. Always verify pre-shipment.
β Error 4: Mislabeling Polyesters as Acrylics.
π Consequence: Seizure or heavy penalties for fraud.
β Correct Approach:
"Poly(methyl methacrylate) (PMMA) Resin, Primary Form, White Powder, Purity >99%, For Injection Molding. CoA Attached."
π― VII. Conclusion: Precision in Classification Saves Money!
π― Remember the Mantra:
πΉ "Acrylic is 3906, Polyester is 3907.20. Check the CoA, Don't Guess the Rate!"
πΉ "3907.69 is 31.5%, 3907.61 is 0%. Know the Difference!"
π Pro Tip:
Since
3906.10tax data is missing, contact a licensed customs broker to confirm the current Section 301 rate for your specific acrylic polymer. If the rate is high, explore if your product fits3907.61.00.50(0% tax) or if you have eligible exclusions.
π£ Immediate Action:
π Verify HS Code with Customs Broker
π Attach Certificate of Analysis (CoA)
π Avoid 31.5% Tariff by Classifying Correctly!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Your Cost Savings Depend on the First 8 Digits!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.