Glass Flat Bottom Drill

🛠️ Glass Flat Bottom Drill – HS Code & Tariff Guide (2026 Update)

🌐 HS Code Classification & Customs Clearance Strategy | 2026 Latest Tariff Breakdown | Expert-Level Compliance Advice
📌 One Product, Five Possible HS Codes – Which One Is Right for Your Glass Flat Bottom Drill?

The Glass Flat Bottom Drill is a precision cutting tool used primarily for drilling into glass, ceramic, or similar brittle materials. Despite its name suggesting a glass body, the cutting tip is almost always made of metal or hard alloy, as glass cannot withstand the mechanical stress of drilling.

⚠️ Critical Insight:
- The term "glass" in the product name refers to the material being drilled, not the material of the tool itself.
- This is a drilling tool (drill bit), not a glass component.
- Do NOT assume it's made of glass – this leads to incorrect HS code classification and massive tariff overpayment.

📦 2. HS Code Classification Breakdown (2026 Official Tariff Matrix)

🔍 Key Differentiator:
- If the drill bit is used in a hand-held tool, 8467.11.50.20 or 8467.21.00.50 may apply.
- If it’s a standalone bit, 8202.39.00.70 or 8202.99.00.00 is more accurate.
- Never use 8467.21.00.50 unless the drill is part of a powered rotary tool.

💰 3. 2026 U.S. Tariff Rate Analysis (With Full Legal Breakdown)

✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025 (including all subsequent imports)

🎯 1. 8202.39.00.70 – Other Drills & Drill Bits (Non-Specified)

📌 Explanation:
- USITC 25%: From Section 301 of the Trade Act – applies to all Chinese-origin goods in this category.
- IEEPA 10%: From the International Emergency Economic Powers Act – applies to all goods from China regardless of product type.
- Total: 35% – high-risk for audits and penalties if misclassified.

🎯 2. 8202.99.00.00 – Other Saw Blades & Parts (Catch-All)

📌 Note:
- This is a "blanket" category used when no more specific code exists.
- High risk of audit if used without strong justification.
- Only recommended if no better fit exists.

🎯 3. 8467.11.50.20 – Drills for Hand-Held or Portable Machines

📌 Important:
- This code applies only if the drill is designed for use in a hand-held or portable drilling tool.
- If it’s a standalone bit, this is incorrect.

🎯 4. 8467.21.00.50 – Hand-Held Electric or Pneumatic Rotary Drills

📌 Key Advantage:
- Only 11.7% total tariff – significantly lower than 35%.
- De Minimis applies → No duty if value < $800.
- Only valid if the drill is part of a powered rotary tool (e.g., electric drill bit).
- If it's just a bit, this is wrong.

🎯 5. 8207.50.20.80 – Other Drilling Tools (Non-Specific)

📌 Warning:
- Highest tariff at 40% – avoid unless no other option.
- Only applies if the drill does not fit into other categories and is not a standard twist drill, wood drill, or rock drill.

🛠️ 4. Customs Clearance Best Practices (Real-World Tips)

✅ 1. Essential Documentation (Must-Have)

✅ 2.申报技巧（Pro申报 Tips）

🔥 "Material ≠ Target – Bit ≠ Glass – Power ≠ Standalone!"

✅ 3. Special Cases & Workarounds

🌍 5. Global Tariff Comparison (2026)

📌 Insight:
- Only the U.S. imposes 301 + IEEPA tariffs.
- China and EU are low-risk for this product.

📌 6. Common Mistakes & How to Avoid Them

❌ Mistake 1: Calling it a "glass drill" and declaring it as glass
👉 Result: Misclassified → 35%+ tariff, seizure, penalties

❌ Mistake 2: Using 8467.21.00.50 for a standalone bit
👉 Result: Wrong code → 35% instead of 11.7% → $10K+ extra cost

❌ Mistake 3: Not providing photos or specs
👉 Result: Customs delays, audit, or rejection

❌ Mistake 4: Assuming "glass" = material
👉 Result: Fundamental error → high risk of non-compliance

✅ Correct Approach:

“Metal-Tipped Flat Bottom Drill Bit for Glass & Ceramic – 6mm Diameter, Hard Alloy Tip, 100% Metal Construction, Not Glass”

🎯 7. Final Verdict: Choose Wisely, Save Big!

🔹 Best HS Code for Standalone Bit: 8202.39.00.70 or 8202.99.00.00 → 35% total
🔹 Best HS Code for Powered Tool Use: 8467.21.00.50 → 11.7% total + de minimis applies
🔹 Avoid: 8207.50.20.80 (40%) and 8467.11.50.20 (35%) unless justified

📌 Pro Tip:
- Use 8467.21.00.50 if the drill is used in a powered tool → save 23.3%
- Use 8202.39.00.70 if it's a standalone bit → 35% but accurate

📣 Action Now: Avoid Costly Mistakes!

📞 Contact a U.S. Customs Broker + Request an Advance Ruling
🚀 Get your HS Code pre-approved before shipment
💼 Save thousands in tariffs and avoid audits

✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Your Profit Depends on the Right HS Code – Don’t Guess, Know!