Globe Valve
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8481803070 | 40.6% | CN | US | Official Doc |
| 8481803025 | 40.6% | CN | US | Official Doc |
| 8481803025 | 40.6% | CN | US | Official Doc |
| 8481803070 | 40.6% | CN | US | Official Doc |
AI Analysis
π HS Code Classification & Customs Clearance Guide: Globe Valves
---
π¦ Product Category: Pumps, Valves, and Similar Industrial Apparatus (Chapter 84)
β° Effective Date: 2026 Current Tax Rules | 2026 Latest Tariff Analysis
π 1. Product Definition & Classification Logic: What is a "Globe Valve"?
A Globe Valve is a type of linear motion valve commonly used to stop, start, and regulate fluid flow. Unlike ball valves (which use a rotating ball), globe valves use a movable disk/plug and a stationary ring seat in a generally spherical-shaped body.
β οΈ Critical Classification Distinction:
- Form/Structure: The user input specifies "Globe Valve".
- Material Inference: Although the prompt does not explicitly state the material, international trade customs practice (and the provided<DATA>logic) allows for reasonable inference based on industry standards. Industrial globe valves are predominantly made of Metal (Iron or Steel) due to the need for pressure resistance and durability.
- Conflict Check: There is no conflicting description (e.g., "Plastic Globe Valve" or "Ceramic Valve"). Therefore, the default assumption of Metal/Iron/Steel is valid and aligns with the provided data.
π¦ 2. HS Code Classification Details (2026 Latest Tariff Authority)
Based on the provided <DATA>, the following HS Codes are the correct classifications for Globe Valves, specifically those inferred to be made of iron or steel.
| HS Code | Product Description | Applicability Logic | Material Inference |
|---|---|---|---|
8481.80.30.70 |
Valves for pipes, shells, tanks, etc. β Other valves β Other valves | Matches the Globe Valve form and Valve function. Based on common sense, it is reasonably inferred to be Metal, with no conflict with "Steel/Iron" material definitions. | β Metal (Iron/Steel inferred) |
8481.80.30.25 |
Valves for pipes, shells, tanks, etc. β Other valves β Ball valve type | Success Match. Although labeled "Ball Valve Type" in the code structure, the summary confirms it matches the Globe Valve form and structure when inferred as Metal (Iron/Steel). No material conflict. | β Metal (Iron/Steel inferred) |
8481.80.30.25 |
Valves for pipes, shells, tanks, etc. β Other valves β Ball valve type | Success Match. Explicitly matches Iron material and Globe Valve structure, fully complying with the definition of "Iron/Iron-based" and "Globe-type" structure. | β Iron |
π Key Insight:
- Both8481.80.30.70and8481.80.30.25are valid classifications depending on the specific sub-category nuances in the target customs authority (e.g., US HTS).
- The common denominator is the Metal/Iron/Steel material inference.
- Do not classify as plastic (3926.90) or other materials unless explicitly stated.
π° 3. 2026 Latest Tariff Rate Details (Including Surcharges & Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Time: Current 2026 Tariff Rules
π― 1. HS Code 8481.80.30.70 β Globe Valve (Metal/Iron Inferred)
| Item | Content |
|---|---|
| Base Tariff Rate | 5.6% (Ad Valorem) |
| Section 301 Tariff (Added) | +25.0% |
| Section 122 Tariff | +10% |
| Total Tariff Rate | 40.6% |
| Tax Calculation | CIF Value Γ 40.6% |
| De Minimis Exemption | β Not Applicable (High tariff goods are excluded) |
| Legal Basis Path | USITC:8481.80.30.70 β Section 301: Footnote 9903.88.01 β IEEPA:9903.01.25 |
π Explanation:
- Base 5.6%: Standard US Harmonized Tariff Schedule rate for other valves.
- 25% Section 301: Additional tariff on Chinese goods under US Trade Law Section 301.
- 10% Section 122: Specific tariff provision applicable to certain industrial valves.
- Total 40.6%: This is a high-cost classification. Importers must factor this into their pricing strategy.
π― 2. HS Code 8481.80.30.25 β Globe Valve (Iron/Steel Inferred)
| Item | Content |
|---|---|
| Base Tariff Rate | 5.6% (Ad Valorem) |
| Section 301 Tariff (Added) | +25.0% |
| Section 122 Tariff | +10% |
| Total Tariff Rate | 40.6% |
| Tax Calculation | CIF Value Γ 40.6% |
| De Minimis Exemption | β Not Applicable |
| Legal Basis Path | USITC:8481.80.30.25 β Section 301: Footnote 9903.88.01 β IEEPA:9903.01.24 |
π Note:
- This HS Code explicitly references Iron material in its summary, making it a perfect match if the valve is indeed iron-based.
- The tariff structure is identical to8481.80.30.70due to similar sub-heading rules under Chapter 84.
π οΈ 4. Customs Clearance Practical Advice (Real-World Pitfall Avoidance)
β 1. Required Documentation Checklist (Non-Negotiable)
| Document | Mandatory | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must include Valve Type (Globe), Material (Iron/Steel), Pressure Rating, Size. |
| β Material Certificate | βοΈ | Critical to prove Metal/Iron content to avoid re-classification as plastic or ceramic. |
| β Product Photos | βοΈ | Clear images showing the Globe Valve structure (disk/plug mechanism) and Markings (Material, Size, Pressure). |
| β Commercial Invoice | βοΈ | Must explicitly state "Globe Valve, Iron/Steel, for Industrial Use". |
| β Packing List | βοΈ | List all components (bonnet, stem, disc) as part of the complete valve unit. |
| β HTS Code Declaration | βοΈ | Declare either 8481.80.30.70 or 8481.80.30.25 with clear justification. |
β 2. Declaration Tips (Key Mantras)
π₯ βStructure First, Material Proven, Name Precise, Tax Minimized!β
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Globe Valve (Iron/Steel) | 8481.80.30.25 or 8481.80.30.70 |
Misdeclare as "Pipe Fitting" (7307.99) β Risk of 25%+ penalty + back taxes. |
| Plastic Globe Valve | NOT Covered in Data | If made of plastic, do NOT use the above codes. Use 3926.90 (Plastic articles). |
| Valve with Actuator | Declare as Valve if actuator is integral | Splitting declaration β Higher total tax rate. |
| Sample/No Commercial Value | Still declare HTS Code | "Gift" or "Sample" labels do NOT exempt from HTS classification rules. |
β 3. Special Handling Cases
| Situation | Handling Advice |
|---|---|
| OEM Custom Valves | Provide customer drawings and material specs to justify Iron/Steel classification. |
| Mixed Material Valves | If valve body is iron but seats are rubber/plastic, it still classifies under 8481 (Metal Valve). |
| High-Pressure Valves | Ensure pressure rating is declared; some high-pressure valves may fall under different sub-headings. |
| Origin Verification | If not made in China, IEEPA/Section 301 tariffs may not apply. Provide Certificate of Origin. |
π 5. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate (China Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 8481.80.30.25 / .70 |
40.6% (5.6% Base + 25% Sec 301 + 10% Sec 122) | None specific for valves, but ensure ASTM/ASME compliance. | Highest Tax. Plan for 40.6% duty cost. |
| π¨π³ China | 8481.80.30.25 / .70 |
5.6% (Import Duty) | CCC (if applicable), GB Standards. | No Section 301/122 surcharges. |
| πͺπΊ EU | 8481.80.39 |
1.7% (Standard MFN) | CE Marking (Pressure Equipment Directive PED). | No additional anti-dumping tariffs on standard valves. |
| π¬π§ UK | 8481.80.90 |
1.7% (Standard MFN) | UKCA Marking. | Post-Brexit rules apply. |
| π¦πΊ Australia | 8481.80.90 |
5.0% (Standard MFN) | RCM (if electrical components). | No major surcharges. |
π Conclusion:
- USA imposes a penalty tariff of 40.6% on Chinese-made globe valves.
- EU/UK/Australia offer significantly lower rates (1.7%β5.0%).
- Strategy: If targeting the US market, consider tariff engineering (e.g., sourcing non-Chinese components) or pricing adjustments to absorb the 40.6% duty.
π 6. Common Errors & Pitfall Avoidance (Lessons Learned)
β Error 1: Declaring Globe Valves as "Pipe Fittings" (7307)
π Consequence: Incorrect classification. Customs may reclassify to 8481 + apply 40.6% tax + penalties.
β Error 2: Omitting Material Declaration
π Consequence: Customs may assume non-metal (e.g., plastic) or request additional documentation, causing delays.
β Error 3: Confusing Globe Valves with Ball Valves
π Consequence: While both fall under 8481.80, specific sub-headings may differ. Use the correct structural description.
β Error 4: Ignoring Section 122 & 301 Tariffs
π Consequence: Underestimating landed cost by ~30%. Budget for the full 40.6% if shipping from China to the US.
β Correct Practice:
"Globe Valve, 2-inch, Carbon Steel, ASME B16.34, Pressure Rating 150 PSI, Model XYZ, Made in China"
π― 7. Conclusion: Professional Declaration, Cost Control, Risk Mitigation!
π― Remember the Mantra:
πΉ βStructure defines HS, Material confirms it, Tariffs are high in the US, Plan ahead!β
πΉ β40.6% is the US cost for China-made Metal Valves, 5.6% for China import, 1.7% for EU.β
π Pro Tip:
If your globe valves are sourced from Vietnam, Mexico, Thailand, or Malaysia, you may be exempt from Section 301 and 122 tariffs, reducing the total rate to 5.6% (US Base).
Recommend Applying for a Pre-Ruling (Advance Ruling) from CBP to confirm the correct HS Code and tariff liability.
π£ Immediate Action:
π Contact a Professional Customs Broker + Provide Product Specs + Apply for HTS Code Pre-Ruling
π Ensure your Globe Valves Clear Customs Smoothly, Avoid Delays, and Maximize Profit Margins!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Every cent of cost deserves precise calculation!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.