Grilling Skewer
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8215995000 | 15.3% | CN | US | Official Doc |
| 8215992600 | 0.0% | CN | US | Official Doc |
| 7323997000 | 65.3% | CN | US | Official Doc |
| 7323930045 | 62.0% | CN | US | Official Doc |
| 7615107180 | 63.1% | CN | US | Official Doc |
| 7615109100 | 70.6% | CN | US | Official Doc |
Product Images
AI Analysis
π₯ Grilling Skewer β HS Code & Tariff Guide 2026 | Full Customs Clearance Breakdown
π HS Code Reference & Customs Clearance Handbook | 2026 Updated Tariff Rules | Pro-Level Import Strategy
π One: Product Definition & Classification β What Exactly Is a βGrilling Skewerβ?
A grilling skewer is a metal rod used for threading food (meat, vegetables, seafood) during grilling or roasting. It's a kitchen utensil made from aluminum or steel, commonly used in both home and commercial kitchens.
β οΈ Key Classification Clue:
- If itβs not coated with nonstick finish, not enameled, and not part of a set β it falls under tableware or kitchenware. - If itβs part of a larger set (e.g., grill kit with tongs, spatula), it may be classified differently.β Important Note:
- Single skewers (not part of a set) are not classified as βpartsβ unless explicitly stated. - Stainless steel skewers are treated differently than aluminum ones.
π¦ Two: HS Code Classification Details (2026 Official Tariff Matrix)
| HS Code | Product Description | Applicable Use Case | Material Type | Contains Nonstick Finish? |
|---|---|---|---|---|
7615.10.71.80 |
Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum: Other: Cooking and kitchen ware: Not enameled or glazed and not containing nonstick interior finishes: Other | Aluminum skewers used for grilling, not coated, not part of a set | Aluminum | β No |
7615.10.91.00 |
Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum: Other: Other | General aluminum kitchen items, including skewers | Aluminum | β No |
7323.99.70.00 |
Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel: Other: Other: Not coated or plated with precious metal: Cookingware | Steel skewers, not coated, used for grilling | Iron/Steel | β No |
7323.93.00.45 |
Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel: Other: Of stainless steel: Cooking and kitchen ware: Other: Cooking ware: Other | Stainless steel skewers, used for grilling | Stainless Steel | β No |
π Critical Insight:
- Aluminum skewers β7615.10.71.80or7615.10.91.00
- Steel skewers β7323.99.70.00
- Stainless steel skewers β7323.93.00.45
- Do not use8215.99.50.00(for cutlery like forks) β skewers are not cutlery!
π° Three: 2026 Tariff Breakdown (With Add-Ons & Legal Triggers)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: November 10, 2025 (inclusive)
π― 1. 7615.10.71.80 β Aluminum Grilling Skewers (Not Enameled, No Nonstick Finish)
| Item | Detail |
|---|---|
| Base Duty Rate | 3.1% (ad valorem) |
| Additional Tariff (Steel, Aluminum, Copper Products) | +50% (under Section 301, USITC) |
| Additional Tariff (IEEPA) | 0% (not applicable to aluminum) |
| Total Effective Tariff | 53.1% |
| Tax Calculation | CIF Value Γ 53.1% |
| De Minimis Threshold | β Not applicable (denied) |
| Legal Basis Path | USITC: 7615.10.71.80 β FOOTNOTE: 9903.88.01 β Section 301: 301-101 |
π Explanation:
- The 50% steel/aluminum tariff applies to all aluminum products from China, regardless of end use. - This is not a "cutlery" item β no 0% rate. - Even if it's just one skewer, the full 53.1% applies.
π― 2. 7615.10.91.00 β Other Aluminum Kitchen Articles (General Category)
| Item | Detail |
|---|---|
| Base Duty Rate | 3.1% |
| Additional Tariff (Steel, Aluminum, Copper Products) | +50% |
| Additional Tariff (IEEPA) | 7.5% (applies to China-origin goods under IEEPA) |
| Total Effective Tariff | 60.6% |
| Tax Calculation | CIF Value Γ 60.6% |
| De Minimis Threshold | β Not applicable |
| Legal Basis Path | IEEPA: 9903.01.24 β USITC: 7615.10.91.00 β FOOTNOTE: 9903.88.01 |
π Why Higher?
- This code is broader and triggers both the 301 tariff (50%) and IEEPA (7.5%). - Avoid this code unless the skewer is not clearly cooking ware.
π― 3. 7323.99.70.00 β Iron/Steel Cookingware (Not Coated)
| Item | Detail |
|---|---|
| Base Duty Rate | 5.3% |
| Additional Tariff (Steel, Aluminum, Copper Products) | +50% |
| Additional Tariff (IEEPA) | 0% |
| Total Effective Tariff | 55.3% |
| Tax Calculation | CIF Value Γ 55.3% |
| De Minimis Threshold | β Not applicable |
| Legal Basis Path | USITC: 7323.99.70.00 β FOOTNOTE: 9903.88.01 β Section 301: 301-101 |
π Note:
- Applies to carbon steel or iron skewers. - Not stainless steel β use7323.93.00.45instead.
π― 4. 7323.93.00.45 β Stainless Steel Cookingware (Other)
| Item | Detail |
|---|---|
| Base Duty Rate | 2.0% |
| Additional Tariff (Steel, Aluminum, Copper Products) | +50% |
| Additional Tariff (IEEPA) | 0% |
| Total Effective Tariff | 52.0% |
| Tax Calculation | CIF Value Γ 52.0% |
| De Minimis Threshold | β Not applicable |
| Legal Basis Path | USITC: 7323.93.00.45 β FOOTNOTE: 9903.88.01 β Section 301: 301-101 |
π Best Option for Stainless Steel Skewers:
- Lowest effective tariff among all steel options. - Still high due to 50% Section 301 tariff.
π οΈ Four: Customs Clearance Best Practices (Real-World Tips)
β 1. Required Documentation (Must-Have List)
| Document | Required? | Why It Matters |
|---|---|---|
| β Commercial Invoice | βοΈ | Must clearly state: βGrilling Skewers, Stainless Steel, Aluminum, or Iron, Not Coatedβ |
| β Packing List | βοΈ | Show quantity, weight, material type per unit |
| β Product Photos (with branding & markings) | βοΈ | Prove material and design |
| β Technical Specs Sheet | βοΈ | Include: material, diameter, length, heat resistance |
| β Certificate of Origin (CO) | βοΈ | If from Vietnam, Mexico, or Thailand β may qualify for IEEPA exemption |
| β Test Report (RoHS, FDA, etc.) | βοΈ | For food-contact items |
| β Bill of Lading (B/L) | βοΈ | For customs clearance |
β 2.η³ζ₯ζε·§οΌPro Tips for Accurate ClassificationοΌ
π₯ βMaterial First, Use Second, No Nonstick = No Escape!β
| Scenario | Correct HS Code | Wrong Code | Why Itβs Wrong |
|---|---|---|---|
| Aluminum skewer, not coated | 7615.10.71.80 |
7615.10.91.00 |
Too broad β higher tariff |
| Stainless steel skewer | 7323.93.00.45 |
7323.99.70.00 |
Not the right subcategory |
| Steel skewer (non-stainless) | 7323.99.70.00 |
8215.99.50.00 |
Not cutlery! |
| Skewers sold in a set with tongs | 7323.99.70.00 (if steel) |
8215.99.50.00 |
Set not classified as cutlery |
β 3. Special Cases & Solutions
| Situation | Recommended Action |
|---|---|
| Skewers from Vietnam/Mexico/Thailand | Apply for IEEPA exemption β 0% tariff |
| Skewers with nonstick coating | Not covered here β must be classified under nonstick cookware β higher tariff (up to 75%) |
| Custom-made skewers for restaurants | Provide customer order + design proof β avoid βnon-standardβ classification |
| Bulk shipment of 10,000 skewers | Use consolidated invoice with itemized list per HS Code |
π Five: Global Customs Comparison (2026 Update)
| Country | Recommended HS Code | Tariff | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 7615.10.71.80 (Aluminum) |
53.1% (China) | FDA, RoHS | 50% Section 301 tariff applies |
| π¨π³ China | 7615.10.71.80 |
5% | CCC | No extra tariffs |
| πͺπΊ EU | 7615.10.71.80 |
0% (if CE) | CE, RoHS | No additional tariffs |
| π¦πΊ Australia | 7615.10.71.80 |
5% | RCM | No extra tariffs |
| π―π΅ Japan | 7615.10.71.80 |
0% | PSE | No extra tariffs |
π Takeaway:
- USA is the only market with 50%+ tariffs on aluminum/steel kitchenware from China. - Vietnam/Mexico origin can avoid the 50% tariff.
π Six: Common Mistakes & How to Avoid Them (Real Cases)
β Mistake 1: Classifying skewers as 8215.99.50.00 (cutlery)
π Result: 5.3% base duty β but the item is not cutlery β penalty + seizure
β Mistake 2: Using 7615.10.91.00 for aluminum skewers
π Result: 60.6% tariff instead of 53.1% β $10,000+ extra cost on 100kg shipment
β Mistake 3: Not specifying material on invoice
π Result: Customs may assume non-stainless steel β higher tariff
β Mistake 4: Sending 10,000 skewers in one box labeled βKitchen Setβ
π Result: May be treated as set β higher tariff or customs delay
β Correct Labeling Example:
βGrilling Skewers, Stainless Steel, 25cm, 6mm Diameter, Food-Grade, Not Coated, 10,000 pcsβ
π― Seven: Final Verdict β How to Win the Tariff Game
πΉ βAluminum? Use
7615.10.71.80β 53.1%
πΉ βStainless Steel? Use7323.93.00.45β 52.0% (Best!)
πΉ βSteel (non-stainless)? Use7323.99.70.00β 55.3%
πΉ βFrom Vietnam/Mexico? Apply for IEEPA exemption β 0%!βπ― Pro Tip:
- Pre-apply for an Advance Ruling (Pre-Decision) with U.S. Customs to lock in the correct HS Code. - Use a customs broker with food-contact product experience.
π£ Act Now: Your Skewers Are Waiting β Donβt Get Stuck in Tariff Traps!
π Contact a U.S.-licensed customs broker + provide:
- Product photos
- Material specs
- Invoice draft
- Origin proof
β Get HS Code pre-approval in 3β5 days!π Your skewers deserve to grill β not get taxed to death!
β¨ Smart Classification = Lower Costs = Faster Shipments = More Profits!
πΌ Your next shipment starts with the right HS Code.
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.