HDPE加工边料
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3915900090 | 35.0% | CN | US | Official Doc |
| 3915100000 | 35.0% | CN | US | Official Doc |
| 3915100000 | 35.0% | CN | US | Official Doc |
| 3915900010 | 35.0% | CN | US | Official Doc |
| 3915900090 | 35.0% | CN | US | Official Doc |
AI Analysis
🧪 HDPE Processing Scraps (High-Density Polyethylene Offcuts & Trim)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Understand "HDPE Processing Scrap"?
HDPE Processing Scraps refer to the waste materials, trimmings, chips, and边角料 (offcuts) generated during the manufacturing or processing of High-Density Polyethylene (HDPE) products. In international trade, these materials are classified strictly as Plastic Waste, Scrap, and Offcuts.
Key Characteristics: 1. Material: HDPE (High-Density Polyethylene), a vinyl polymer. 2. Form: Solid waste, chips, scrap, or offcuts generated during processing. 3. Condition: Unprocessed waste material, not yet recycled into new pellets.
⚠️ Critical Distinction:
- If the material is clean HDPE trim/edge waste from manufacturing → It fits the definition of "Waste and Scrap of Plastics."
- If it contains contaminants, mixed plastics, or non-HDPE materials → It may be reclassified or subject to stricter inspection.
- Material Conflict Check: HDPE/LDPE are both ethylene polymers. The classification focuses on the form (waste/scrap) and the specific plastic type within Chapter 39.
📦 II. HS Code Classification Details (2026 Latest Tariff Authoritative Comparison)
| HS Code | Product Description | Applicability Scenario | Material/State Check |
|---|---|---|---|
3915.10.00.00 |
Waste, scrap, and offcuts of ethylene polymers (e.g., HDPE/LDPE) | HDPE/LDPE manufacturing trim, edge waste, clean chips | ✅ HDPE/LDPE: Vinyl polymer, matches "Waste/Scrap" form |
3915.90.00.10 |
Waste, scrap, and offcuts of other plastics (e.g., LDPE in some contexts) | LDPE or other unspecified plastic waste | ✅ LDPE: Vinyl polymer, matches "Waste/Scrap" form under "Other" |
3915.90.00.90 |
Waste, scrap, and offcuts of other plastics (e.g., general plastic waste) | HDPE/LDPE if not specifically listed, or mixed plastic scrap | ✅ HDPE/LDPE: Matches "Waste/Scrap" form, no material conflict |
🔍 Key Reminder:
- All HDPE/LDPE processing scraps must be declared as "Waste, Scrap, and Offcuts of Plastics" (Heading 3915).
- The specific subheading (3915.10.00.00vs.3915.90.00.xx) depends on whether the customs authority strictly separates "Ethylene Polymers" (3915.10) from "Other Plastics" (3915.90).
- Note: HDPE and LDPE are both ethylene polymers. Therefore,3915.10.00.00is the most accurate for pure HDPE/LDPE waste. However, if the system or local practice groups LDPE under "Other,"3915.90.00.10or90may apply.
- All these codes share the same tariff structure as per the provided data.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Taxes & Policy Surcharges)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: From November 10, 2025 (including subsequent imports)
🎯 1. 3915.10.00.00 – Waste, Scrap, and Offcuts of Ethylene Polymers (HDPE/LDPE)
| Item | Content |
|---|---|
| Base Duty Rate | 0% (ad valorem) |
| Section 301 Additional Duty | +25% (Under USITC Footnote 9903.88.01) |
| Section 122 Duty (IEEPA) | +10% (For products from China/Hong Kong, effective Nov 10, 2025) |
| Total Duty Rate | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| De Minimis Exemption | ❌ Not Applicable (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:3915.10.00.00 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- "USITC Additional Duty 25%": From the "Additional Duties" under Section 301 of the U.S. Trade Act;
- "Section 122 Duty 10%": Additional tariff under the International Emergency Economic Powers Act (IEEPA) targeting Chinese products;
- Total 35.0%: This is a high tariff rate. Must be accounted for in cost calculations!
🎯 2. 3915.90.00.90 – Waste, Scrap, and Offcuts of Other Plastics (General Plastic Waste)
| Item | Content |
|---|---|
| Base Duty Rate | 0% |
| USITC Additional Duty | +25% |
| Section 122 Duty (IEEPA) | +10% |
| Total Duty Rate | 35.0% |
| Tax Calculation | CIF × 35.0% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:3915.90.00.90 → FOOTNOTE:9903.88.01 |
📌 Note:
- Same tax rate as3915.10.00.00;
- Even if classified under "Other Plastics" due to system limitations or mixed materials, the tariff remains 35%.
🎯 3. 3915.90.00.10 – Waste, Scrap, and Offcuts of Other Plastics (LDPE Specific)
| Item | Content |
|---|---|
| Base Duty Rate | 0% |
| USITC Additional Duty | +25% |
| Section 122 Duty (IEEPA) | +10% |
| Total Duty Rate | 35.0% |
| Tax Calculation | CIF × 35.0% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:3915.90.00.10 → FOOTNOTE:9903.88.01 |
📌 Note:
- LDPE is also an ethylene polymer. If declared under "Other Plastics" (3915.90), the tax is still 35%.
- Whether HDPE or LDPE, as long as it is plastic waste/scrap from China, the total tariff is 35%.
🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance Guide)
✅ 1. Required Documentation List (None Can Be Omitted)
| Document | Mandatory? | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Include material composition (HDPE/LDPE), form (chips, offcuts), weight, origin |
| ✅ Processing Flowchart | ✔️ | Explain how the scrap is generated (e.g., trimming, injection molding waste) |
| ✅ Product Photos | ✔️ | Clear images showing material texture, color, and form (no mixed debris) |
| ✅ Commercial Invoice | ✔️ | Explicitly state "HDPE Processing Scrap" or "Waste of Ethylene Polymers" |
| ✅ Packing List | ✔️ | Detail net weight, gross weight, and packaging type (e.g., bales, bags) |
| ✅ Certificate of Origin | ✔️ | If not from China, apply for preferential rates |
| ✅ Third-Party Test Report | ✔️ | If required, prove no contamination from other hazardous materials |
✅ 2. Declaration Tips (Key Mantra)
🔥 "Pure Material, Clear Form, No Mixing, Tax is Stable!"
| Scenario | Correct Declaration Method | Wrong Approach |
|---|---|---|
| Pure HDPE/LDPE Offcuts | 3915.10.00.00 |
Misdeclaring as "Recycled Pellets" → Higher tax/Inspection |
| Mixed Plastic Waste | 3915.90.00.90 |
Declaring as "HDPE" → Customs seizure for false declaration |
| Contaminated Scrap | Subject to Inspection | Hiding contamination → Delays, fines, or return |
| Clean HDPE Chips | 3915.10.00.00 |
Using vague terms like "Plastic Parts" → Wrong classification |
✅ 3. Special Case Handling
| Scenario | Handling Advice |
|---|---|
| OEM HDPE Scrap | Provide customer order + design drawings to prove it is manufacturing waste |
| Scrap with Adhesives/Labels | Declare as mixed material; may fall under 3915.90.00.90 and require more scrutiny |
| Scrap for Recycling | Still declared as Waste/Scrap; ensure it meets US EPA environmental standards |
| Scrap for Export to Non-US Markets | Different HS codes/tariffs apply; check destination country rules |
🌍 V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3915.10.00.00 |
35% (China origin) | None (but inspection likely) | High tariff due to Section 301 + 122 |
| 🇨🇳 China | 3915.10.00.00 |
0% | None | Domestic recycling encouraged |
| 🇪🇺 EU | 3915.10 |
0% | CE/RoHS (if re-exported) | No additional surcharges |
| 🇦🇺 Australia | 3915.10 |
5% | None | Lower tariff than US |
| 🇯🇵 Japan | 3915.10 |
0% | PSE (if applicable) | No surcharges |
📌 Conclusion:
- USA is the only major market with high additional tariffs (35%) for plastic waste from China;
- Chinese-origin HDPE/LDPE scrap faces significant cost pressure in the US market; consider supply chain adjustments or pre-clearance rulings.
📌 VI. Common Mistakes & Pitfall Avoidance (Lessons Learned)
❌ Mistake 1: Declaring "HDPE Scrap" as "Recycled PE Pellets"
👉 Consequence: Higher tax rate + Environmental inspection → Delays or Fines!
❌ Mistake 2: Mixing HDPE with other plastics (e.g., PP, PET) in one shipment
👉 Consequence: Customs may classify as "Mixed Plastic Waste" → 35% + Risk of Rejection!
❌ Mistake 3: Failing to specify "Waste/Scrap" in the description
👉 Consequence: Customs doubts the product nature → Inspection Delays!
❌ Mistake 4: Ignoring Section 122 Duty
👉 Consequence: Underpayment → Back Taxes + Penalties!
✅ Correct Practice:
"HDPE Processing Scrap, Clean Offcuts, Ethylene Polymer Waste, Model: HDPE-SCRAP-01, Origin: China"
🎯 VII. Conclusion: Professional Declaration, Time-Saving, Cost-Effective!
🎯 Remember the Mantra:
🔹 "Pure Scrap, Clear Form, No Mixing, Tax is 35%!"
🔹 "HS Code determines destiny, 35% tax is high, wrong declaration means big loss!"
📌 Tips:
If your HDPE scrap originates from Vietnam, Mexico, Thailand, or Malaysia, you may apply for IEEPA Exemption, and the tariff could be 0%~5%;
It is recommended to apply for an Advance Ruling in advance to avoid clearance risks.
📣 Take Action Now:
📞 Contact a professional customs broker + Provide product photos + Apply for HS Code Advance Ruling
🚀 Let your HDPE scrap pass through customs smoothly, export efficiently, and maximize profits!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every penny of your cost deserves precise calculation!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.