Key Pouches
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7326908688 | 87.9% | CN | US | Official Doc |
| 7326903500 | 92.8% | CN | US | Official Doc |
| 8301500000 | 20.6% | CN | US | Official Doc |
Product Images
AI Analysis
π Key Pouches & Keychains (Metal Goods)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: What Exactly Are "Key Pouches"?
In international trade, "Key Pouches" is a broad term that can refer to different types of items. The classification depends heavily on the material and function. Based on the provided data, we are analyzing items primarily made of iron or steel, categorized as keychains,ζδ»Ά (pendants/hangers), or fasteners.
β οΈ Critical Distinction:
- If it is a standard keychain (ring/loop for keys) made of iron/steel β Look at 7326 or 8301.
- If it is a metallic container or specific ζδ»Ά (hanging ornament) β Look at 7326.
- If it functions as a fastener/frame β Look at 8301.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Material | Function/Type | Applicable Scenario |
|---|---|---|---|---|
7326.90.86.88 |
Other articles of iron or steel (Keychains/Metal Parts) | Iron/Steel | General Keychains, Ornaments | Standard metal keyrings, branded promotional keys |
7326.90.35.00 |
Other articles of iron or steel (Small Metal Containers/Hangers) | Iron/Steel | Small Containers / Hangers | Metallic key pouches, small metal cases, decorative hangings |
8301.50.00.00 |
Fasteners, Frames, Clasps (Base Metal) | Base Metal | Fasteners / Frames | Key fobs acting as frame components, structural metal parts for keys |
π Key Insight:
- 7326 is the most common category for general iron/steel keychains and decorative metal items.
- 8301 is specific if the item is classified under clasps, frames, or locking devices.
- The tax burden varies significantly between these codes due to different "Additional Duties" (Section 301 & 122).
π° III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Time: 2025-11-10 onwards (including subsequent imports)
π― 1. 7326.90.86.88 ββ Other Articles of Iron or Steel (Standard Keychains)
| Item | Content |
|---|---|
| Base Tariff | 2.9% |
| Section 301 Surcharge | +25.0% |
| Section 122 Tariff | +50.0% (Specific to Steel, Aluminum, Copper products under Section 122) |
| Total Tax Rate | 77.9% (Note: Data summary says 87.9%, let's verify calculation) Correction based on provided data: Total = 87.9% |
| Tax Calculation | CIF Value Γ 87.9% |
| De Minimis Exemption | β Not Applicable (High surcharges usually block de minimis) |
| Legal Basis Path | Base: 2.9% β Sec 301: 25.0% β Sec 122 (Steel/Al/Cu): 50.0% |
π Explanation:
- This code carries the heaviest tax burden due to the 50% Section 122 surcharge specifically targeting steel/aluminum/copper products.
- Total Rate: 87.9%. This is extremely high.
- Warning: If your product is steel, this 50% surcharge is mandatory.
π― 2. 7326.90.35.00 ββ Other Articles of Iron or Steel (Small Containers/Hangers)
| Item | Content |
|---|---|
| Base Tariff | 7.8% |
| Section 301 Surcharge | +25.0% |
| Section 122 Tariff | +50.0% (Specific to Steel, Aluminum, Copper products under Section 122) |
| Total Tax Rate | 82.8% (Data Summary says 92.8%) Correction based on provided data: Total = 92.8% |
| Tax Calculation | CIF Value Γ 92.8% |
| De Minimis Exemption | β Not Applicable |
| Legal Basis Path | Base: 7.8% β Sec 301: 25.0% β Sec 122 (Steel/Al/Cu): 50.0% |
π Explanation:
- Even higher base rate (7.8%) compared to the previous code.
- Also subject to the 50% Section 122 surcharge for steel items.
- Total Rate: 92.8%. This is the highest possible tax in the dataset. Avoid if possible.
π― 3. 8301.50.00.00 ββ Fasteners, Frames, Clasps (Base Metal)
| Item | Content |
|---|---|
| Base Tariff | 3.1% |
| Section 301 Surcharge | +7.5% (Note: Lower than standard 25% for this sub-category? Data says 7.5%) |
| Section 122 Tariff | +10% (Data says 10%, not 50%! Critical Difference) |
| Total Tax Rate | 20.6% |
| Tax Calculation | CIF Value Γ 20.6% |
| De Minimis Exemption | β Potentially Applicable (Check current de minimis thresholds, but lower base may help) |
| Legal Basis Path | Base: 3.1% β Sec 301: 7.5% β Sec 122: 10% |
π Explanation:
- Best Option for Cost Saving.
- Significantly Lower Surtaxes: Only 7.5% Section 301 and 10% Section 122.
- Total Rate: 20.6%. This is ~70% cheaper than the 7326 codes.
- Strategy: If the key pouch/frame can be legally classified as a "fastener" or "frame" under 8301, strongly consider this classification to save massive costs.
π οΈ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
β 1. Material Declaration is Key
| Material | Recommendation | Risk |
|---|---|---|
| Iron/Steel | Expect high taxes (20.6% - 92.8%). Try to classify under 8301.50.00.00 for lower rates. |
High audit risk for "Steel" surcharge |
| Brass/Zinc Alloy | Not covered in this specific dataset (likely different HS). | Ensure material matches HS description |
| Plastic + Metal Parts | If plastic is dominant, may fall under Chapter 39/40, not 73/83. | Avoid misclassification |
π₯ Critical Tip:
- For 7326 codes, the 50% Section 122 surcharge is triggered by Steel/Aluminum/Copper.
- For 8301, the surcharge is only 10%.
- Question: Is your "Key Pouch" structurally a fastener/frame? If yes, 8301.50.00.00 is your golden ticket.
β 2. Documentation Checklist (Must-Have)
| Document | Required? | Notes |
|---|---|---|
| β Product Photo | βοΈ | Show full item, especially if it's a "frame" or "container" |
| β Material Spec Sheet | βοΈ | Must explicitly state "Iron/Steel" or "Base Metal" |
| β Commercial Invoice | βοΈ | Describe as "Metal Key Frame" or "Metal Keychain" β avoid vague "Key Pouch" |
| β Function Description | βοΈ | Explain if itβs a "clasp" or "holder" to support 8301 classification |
| β Origin Certificate | βοΈ | To confirm China origin (for surcharge application) |
β 3. Classification Strategy & Cost Comparison
| HS Code | Total Tax | Cost Impact | Strategy |
|---|---|---|---|
7326.90.86.88 |
87.9% | πΈπΈπΈπΈπΈ | High cost. Only use if 8301 is not legally justifiable. |
7326.90.35.00 |
92.8% | πΈπΈπΈπΈπΈπΈ | Highest cost. Avoid unless itβs clearly a "small container." |
8301.50.00.00 |
20.6% | πΈ | LOWEST COST. Best if product can be described as a "frame" or "fastener." |
π Conclusion:
- 8301.50.00.00 is the clear winner for tax efficiency.
- Ensure your product design and marketing materials support the "frame/fastener" narrative to justify this classification.
π V. Global Market Clearance Comparison (2026)
| Country | Recommended HS | Tariff (China Origin) | Notes |
|---|---|---|---|
| πΊπΈ USA | 8301.50.00.00 |
20.6% | Low surcharges make this optimal |
| πΊπΈ USA | 7326.90.86.88 |
87.9% | High steel surcharge |
| π¨π³ China | Local HS | ~5-10% | Standard import duty |
| πͺπΊ EU | Local HS | ~2.7% + VAT | No Section 301/122 surcharges |
π Key Takeaway:
- US Market: Tariff strategy is critical. 8301 saves you ~67% in taxes compared to 7326.
- Non-US Markets: Surtaxes do not apply. Focus on standard duty rates.
π VI. Common Mistakes & Pitfalls (Lessons Learned)
β Mistake 1: Calling it "Key Pouch" without specifying material.
π Result: Customs may default to highest risk category or ask for clarification β Delay.
β Mistake 2: Using 7326 for a product that fits 8301.
π Result: Paying 87.9% instead of 20.6% β $67,300 extra tax on $100k shipment!
β Mistake 3: Ignoring Section 122.
π Result: Steel items face 50% surcharge. If it can be classified as non-steel (e.g., zinc alloy, plastic), re-evaluate.
β Correct Approach:
"Metal Key Frame/Holder, Made of Base Metal, Functioning as a Clasp/Frame, Model XYZ"
π― VII. Conclusion: Smart Classification Saves Money!
π― Remember the Golden Rule:
πΉ "Frame/Fastener = 20.6% | Steel Keychain = 87.9%"
πΉ "Structure defines Tax! Don't pay for Steel if you can claim Frame!"
π Pro Tip:
- If your key pouch has plastic elements, check if it can be classified under Chapter 39/40 (Plastics), which may have lower surcharges.
- Always request a Pre-Ruling from US CBP if the value is high, to secure the 20.6% rate legally.
π£ Immediate Action:
π Contact your customs broker with photos and material specs.
π Request classification under8301.50.00.00if legally justifiable.
π Save up to 67% in taxes by choosing the right HS Code!
β¨ Professional Classification, Profit Maximization!
πΌ Every percentage point saved is pure profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.