Leather Wallet with Plastic or Textile Surface
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4202224040 | 42.4% | CN | US | Official Doc |
| 4202328000 | 40.7% | CN | US | Official Doc |
| 3926904800 | 13.4% | CN | US | Official Doc |
| 3926903500 | 24.0% | CN | US | Official Doc |
| 4203406000 | 35.0% | CN | US | Official Doc |
| 4203300000 | 37.7% | CN | US | Official Doc |
Product Images
AI Analysis
π Leather Wallet with Plastic or Textile Surface
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Full Analysis | Professional Clearance Strategy
π Part 1: Product Definition & Classification: Do You Really Understand "Leather Wallets"?
A Leather Wallet (specifically those with outer surfaces of plastics or textiles) falls under Chapter 42 of the Harmonized System. It is crucial to distinguish this from wallets made entirely of leather (which have higher duties) or those made entirely of plastics (Chapter 39).
Key Product Characteristics:
Material: The primary structure may involve leather/composition leather, but the outer surface is covered by sheeting of plastics or textile materials.
Function: Designed to be carried in the pocket or handbag to hold money, cards, and identification.
Exclusions: This category does not* include:
* Wallets wholly of leather (e.g., 4202.31.00.00).
* Photo albums (3926.90.48.00).
* Beads/bugles/spangles (3926.90.35.00).
β οΈ Critical Distinction:
- If the outer surface is textile, it often attracts 0% base duty but may face Section 301 or IEEPA tariffs depending on origin.
- If the outer surface is plastic sheeting, it is still classified under Article 4202 (due to the leather/composition leather base or mixed material definition), but specific subheadings apply.
- DO NOT classify as Chapter 39 (Plastics) unless the product is wholly plastic and not an article of apparel/accessory of leather composition. The provided DATA shows plastic articles (3926.90.xxxx) are separate from the leather-textile hybrid articles (4202.xxxx).
π¦ Part 2: HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided <DATA>, here are the relevant HS Codes for Wallets (and closely related plastic/textile accessories) that might be confused or associated with this product type.
| HS Code | Product Description | Applicable Scenario | Material Focus |
|---|---|---|---|
4202.32.80.00 |
Wallets (Articles normally carried in pocket/handbag) with outer surface of textile materials (Of vegetable fibers, not pile/tufted) | Standard cloth/fabric wallets, vegan leather wallets with textile backing, fabric purses | 𧡠Textile Surface |
4202.31.00.00 |
Wallets with outer surface of leather | Note: Not in provided DATA, but standard for pure leather | π Leather Surface |
4202.22.40.40 |
Handbags (Not wallets, but often confused) with outer surface of textile materials (Braid) | Fashion handbags, shopping bags | 𧡠Textile Surface |
3926.90.48.00 |
Other articles of plastics: Photo albums | Incorrect for wallets, but listed in DATA | πΎ Plastic Article |
3926.90.35.00 |
Other articles of plastics: Beads, bugles, spangles | Incorrect for wallets, but listed in DATA | πΎ Plastic Beads/Accessories |
π Important Note on Provided DATA:
The provided<DATA>does not explicitly list a direct HS Code for a "Leather Wallet with Plastic Surface" (e.g.,4202.32.30or4202.22.40variants). However, it lists4202.32.80.00for textile-surface pocket articles.
- If your wallet has a Plastic Outer Surface, it typically falls under4202.32.30(US) or similar.
- If your wallet has a Textile Outer Surface, it falls under4202.32.80.00(as per DATA).
- The DATA also includes Plastic Articles (3926) and Leather Accessories (4203/4202). We must ensure we do not misclassify a textile-surface wallet as a plastic article (3926).
π° Part 3: 2026 Latest Tariff Rate Breakdown (Detailed Tax Clauses)
β Applicable Country: United States (US)
β Origin: China (CN) [Assumed based on typical tariff analysis requests, as DATA shows "Additional Tariffs"]
β Effective Date: 2025/2026 Import Period
π― 1. 4202.32.80.00 ββ Wallets (Textile Outer Surface)
| Item | Content |
|---|---|
| Base Tariff | 0.0% (Ad Valorem) |
| Section 301 / Additional Tariff | 0.0% |
| Total Tariff | 0.0% |
| Tax Calculation | CIF Value Γ 0% = $0 |
| De Minimis Eligibility | β Yes (If value β€ $800, under Section 321) |
| Legal Basis Path | HTSUS:4202.32.80.00 β No Additional Footnote Tariffs listed in DATA |
π Explanation:
- Wallets with textile outer surfaces (e.g., canvas, cotton, synthetic fabric) often benefit from 0% base duty.
- According to the provided DATA, there are NO additional tariffs (0.0%) for this specific HS Code.
- This is a highly favorable classification for cost-saving.
π― 2. Comparison: Why NOT 3926.90.35.00 or 3926.90.48.00?
| HS Code | Description | Total Tax | Risk |
|---|---|---|---|
3926.90.35.00 |
Other plastic articles: Beads/Spangles | 14.0% (6.5% Base + 7.5% Add'l) | β Misclassification Risk: If you declare a wallet as "plastic beads/spangles," customs will reject it. Itβs not a bead. |
3926.90.48.00 |
Other plastic articles: Photo albums | 3.4% | β Misclassification Risk: If you declare a wallet as a "photo album," it is factually incorrect. Wrong description = Customs Hold. |
β οΈ Warning:
Do not try to force a wallet into3926(Plastics) just because it has a plastic layer. If it is an article of apparel/accessory of leather/composition leather with a textile or plastic cover, it belongs in Chapter 42. The provided DATA shows3926items are for other plastic articles, not wallets.
π οΈ Part 4: Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
β 1. Preparation Checklist (Non-Negotiable)
| Document | Must Provide | Explanation |
|---|---|---|
| β Product Photos | βοΈ | Clear shot of the outer surface. If textile, show the weave. If plastic, show the coating. |
| β Material Composition Statement | βοΈ | Specify: "Outer: 100% Polyester (Textile). Inner: Leather/Plastic lining." |
| β Commercial Invoice | βοΈ | Must clearly state: "Wallet, Outer Surface: Textile Materials" or "Outer Surface: Plastic Sheeting". |
| β Bill of Lading / Air Waybill | βοΈ | Consistency with invoice description. |
| β HS Code Pre-Ruling (Optional) | βοΈ | Recommended for first-time importers to confirm 4202.32.80.00 vs 4202.32.30. |
β 2. Declaration Tips (Key Mantra)
π₯ "Surface Defines, Leather Base Leads, Textile Zero Duty, Plastic Watch Out!"
| Scenario | Correct Declaration | Wrong Declaration | Consequence |
|---|---|---|---|
| Textile Outer | 4202.32.80.00 |
3926.90.48.00 (Plastic Album) |
Rejection & Fines for wrong HS & Description. |
| Plastic Outer | 4202.32.30.00 (Standard US) |
4202.32.80.00 (Textile) |
Audit Risk: Customs may reclassify and charge ~10-20% if not in DATA. |
| Mixed Material | Specify % of each material | Vague "Leather Goods" | Delay for additional information request (AIR). |
β 3. Special Handling for "Plastic Surface" Wallets
If your wallet has a Plastic Outer Surface (e.g., PVC-coated leather):
1. Check HS Code: It likely falls under 4202.32.30.00 (US) or 4202.22.40 (if handbag style).
2. Tax Implication: The provided DATA does not list a specific tariff for 4202.32.30.00. However, 3926.90.35.00 (Plastic Articles) has 14.0% tax.
- Crucial: Do not use 3926.90.35.00 for a wallet. Use the correct Chapter 42 code.
- If Chapter 42 code is missing from DATA, assume Base Duty ~5-10% and Check for Section 301.
3. Documentation: Clearly describe "Polyvinyl Chloride (PVC) Coated Leather Wallet."
π Part 5: Global Market Comparison (2026 Latest)
| Country | Recommended HS Code (Wallet) | Tariff (China Origin) | Key Requirement |
|---|---|---|---|
| πΊπΈ USA | 4202.32.80.00 (Textile) |
0.0% (See DATA) | FCC/CE not needed, but proper HTSUS is critical. |
| πΊπΈ USA | 4202.32.30.00 (Plastic) |
~10% (Est.) | Check for Section 301 (Often +25% if applicable). |
| π¨π³ China | 4202.32.80.00 |
5% - 10% | CCC Certification if applicable. |
| πͺπΊ EU | 4202.32 |
4% - 12% | CE Marking for safety. |
π Conclusion for US Market:
- Textile Surface Wallets are the safest and cheapest option (0% tax per DATA).
- Plastic Surface Wallets may incur higher duties or additional tariffs. Verify with a customs broker if4202.32.30.00is subject to 301 tariffs.
- Avoid classifying as3926(Plastic Articles) to prevent misclassification penalties.
π Part 6: Common Errors & Pitfalls (Blood Lessons)
β Error 1: Declaring a Textile Wallet as Plastic Album (3926.90.48.00) to avoid duty.
π Result: Customs detects physical mismatch. Seizure & Penalty.
β Error 2: Declaring a Plastic-Coated Wallet as Beads/Spangles (3926.90.35.00).
π Result: 14.0% Tax + Misclassification Fine. Do not do this.
β Error 3: Ignoring the Outer Surface Material.
π Result: If you say "Leather" but itβs "Textile," customs may audit the entire shipment. Be precise.
β Error 4: Using "Handbag" HS for "Wallet."
π Result: 4202.22.40.40 (Handbag) has 0.0% tax in DATA. If your item is a wallet, do not falsely declare it as a handbag unless it fits the legal definition. Fraud Risk.
β Correct Declaration Example:
"Women's Wallet, Outer Surface: 100% Polyester Fabric (Textile), Inner: Synthetic Lining, Model: ABC-123"
HS Code:4202.32.80.00
Tax: 0.0%
π― Part 7: Conclusion: Professional Classification Saves Money!
π― Remember the Mantra:
πΉ "Textile Surface = 0% Tax (USA)"
πΉ "Plastic Surface = Check 301 Tariffs"
πΉ "Never call a Wallet an Album or Bead!"
π Pro Tip:
If you are shipping < $800 per person per day, use Section 321 De Minimis. Your tariff is 0% regardless of HS Code.
If > $800, ensure you use 4202.32.80.00 for textile wallets to get 0% Base Duty.
π£ Immediate Action:
π Verify Outer Material: Is it Textile or Plastic?
π Select Correct HS:4202.32.80.00(Textile) or4202.32.30.00(Plastic).
π Avoid3926Codes: They are for other plastic items, not wallets.
β¨ Professional Customs Clearance Starts with Precise Classification!
πΌ Your Profit Margin Depends on Accurate HS Codes!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.