Left Hand Skeleton Diagram
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4911913000 | 10.0% | CN | US | Official Doc |
| 9023000000 | 17.5% | CN | US | Official Doc |
| 4911914040 | 17.5% | CN | US | Official Doc |
AI Analysis
𦴠Left Hand Skeleton Diagram (Anatomical Illustration)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Strategy for Anatomical Illustrations
π 1. Product Definition & Classification: What is a "Left Hand Skeleton Diagram"?
A "Left Hand Skeleton Diagram" is a visual representation, typically a printed image, design, or photograph, depicting the skeletal structure of a human left hand. In international trade, its classification depends heavily on its physical form and primary purpose:
- Printed Paper Product (2D): If it is a flat print (e.g., on paper, poster, or card), it is classified as a printed item.
- 3D Model/Demonstration Tool: If it is a physical, three-dimensional model used for educational or exhibition purposes, it is classified as a model for demonstration.
β οΈ Critical Distinction:
- If the product is flat and printed (paper-based) β It falls under Heading 4911 (Printed material).
- If the product is a 3D physical model (plastic, resin, etc.) for teaching/exhibition β It falls under Heading 9023 (Models for demonstration).
π¦ 2. HS Code Classification Details (Based on Provided Data)
| HS Code | Product Description | Applicable Scenario | Physical Form |
|---|---|---|---|
4911.91.30.00 |
Skeleton Diagram (Printed) | Printed images/designs; specifically classified as printed paper products in this dataset. | β 2D Print |
9023.00.00.00 |
Skeleton Model | Physical models for demonstration, educational, or exhibition purposes. | β 3D Model |
4911.91.40.40 |
Skeleton Diagram (Printed) | Other printed materials; images/designs/photos consistent with "other printed matter." | β 2D Print |
π Key Insight:
- The dataset provides two distinct HS codes for printed versions (4911.91.30.00and4911.91.40.40) and one for 3D models (9023.00.00.00).
- Do not confuse a printed diagram with a 3D model. Misclassification leads to significant duty differences.
π° 3. 2026 Latest Tariff Rate Breakdown (US Market)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: 2025 November 10 onwards (including subsequent imports)
π― 1. 4911.91.30.00 β Skeleton Diagram (Printed Paper)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Tariff | 0.0% |
| Section 122 Tariff | 10% |
| Total Tariff | 10.0% |
| Tax Calculation | CIF Value Γ 10% |
| De Minimis Eligibility | β Not Eligible (Due to Section 122 tariff) |
| Legal Basis Path | Section 122: 10% β USITC: 4911.91.30.00 |
π Explanation:
- This code applies to printed skeleton diagrams.
- Although the base tariff is 0%, the Section 122 tariff of 10% is applied.
- No Section 301 tariff is listed for this specific code in the provided data.
π― 2. 9023.00.00.00 β Skeleton Model (3D Physical Model)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Tariff | 7.5% |
| Section 122 Tariff | 10% |
| Total Tariff | 17.5% |
| Tax Calculation | CIF Value Γ 17.5% |
| De Minimis Eligibility | β Not Eligible (Combined tariffs exceed de minimis thresholds) |
| Legal Basis Path | Section 301: 7.5% β Section 122: 10% β USITC: 9023.00.00.00 |
π Explanation:
- This code applies to physical 3D skeleton models used for demonstration.
- Subject to both Section 301 (7.5%) and Section 122 (10%) tariffs.
- Total duty is 17.5%, which is 7.5% higher than the printed version.
π― 3. 4911.91.40.40 β Skeleton Diagram (Other Printed Material)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Tariff | 7.5% |
| Section 122 Tariff | 10% |
| Total Tariff | 17.5% |
| Tax Calculation | CIF Value Γ 17.5% |
| De Minimis Eligibility | β Not Eligible |
| Legal Basis Path | Section 301: 7.5% β Section 122: 10% β USITC: 4911.91.40.40 |
π Explanation:
- This code also applies to printed skeleton diagrams but is categorized under "other printed matter."
- Unlike4911.91.30.00, this code incurs a Section 301 tariff of 7.5% in addition to the Section 122 tariff.
- Total duty is 17.5%, same as the 3D model.
π οΈ 4. Customs Clearance Practical Advice (Avoiding Pitfalls)
β 1. Documentation Checklist (Mandatory)
| Document | Required | Notes |
|---|---|---|
| β Product Photos | βοΈ | Must clearly show if it is 2D print or 3D model. |
| β Commercial Invoice | βοΈ | Explicitly describe as "Skeleton Diagram, Printed" or "Skeleton Model, 3D." |
| β Product Specification | βοΈ | Include dimensions, material (paper vs. plastic/resin), and purpose (educational/exhibition). |
| β Packing List | βοΈ | Detail contents to avoid ambiguity. |
β 2. Classification Strategy (Key Takeaways)
π₯ "Check the Form: Print vs. Model Dictates the Tariff!"
| Scenario | Correct HS Code | Total Tariff | Risk of Misclassification |
|---|---|---|---|
| Flat printed diagram (Paper/Poster) | 4911.91.30.00 |
10% | Low risk if correctly described as "printed." |
| Flat printed diagram (Other paper product) | 4911.91.40.40 |
17.5% | Higher tariff; avoid if 4911.91.30.00 is applicable. |
| 3D Physical Model (Plastic/Resin) | 9023.00.00.00 |
17.5% | Must prove it is a "model for demonstration." |
β οΈ Warning:
- Do not mislabel a 3D model as a "printed diagram" to save on tariffs. Customs will inspect the physical goods.
- Do not assume all printed diagrams are taxed at 10%. Verify if4911.91.30.00or4911.91.40.40is more appropriate for your specific print type.
β 3. Special Considerations
| Situation | Recommendation |
|---|---|
| Digital File Only | If importing a digital file (no physical shipment), HS Code does not apply (no customs duty). |
| Bundle with 3D Model | If a printed diagram is packaged with a 3D model, declare them separately to ensure correct classification. |
| Educational Kits | If part of a kit, ensure each component is correctly classified. |
π 5. Global Market Comparison (2026)
| Market | Recommended HS Code | Total Tariff (China Origin) | Notes |
|---|---|---|---|
| πΊπΈ USA | 4911.91.30.00 / 9023.00.00.00 |
10% - 17.5% | Section 122 applies. Section 301 may apply depending on subheading. |
| π¨π³ China | 4911.91.30.00 / 9023.00.00.00 |
0% - 7.5% | Check China's latest tariff schedule for import duties. |
| πͺπΊ EU | 4911.99.90 / 9023.00.00 |
0% - 4.5% | Typically lower tariffs; no Section 122/301 equivalent. |
| π―π΅ Japan | 4911.91.000 / 9023.00.000 |
0% - 6.0% | Generally favorable for educational materials. |
π Conclusion:
- The USA imposes the highest tariffs due to Section 122 and Section 301.
- For printed diagrams,4911.91.30.00offers the lowest duty (10%) in the US market.
- For 3D models, the duty is 17.5% due to additional Section 301 charges.
π 6. Common Mistakes & Pitfalls (Learn from Others)
β Mistake 1: Declaring a 3D model as a "printed diagram" to save on Section 301.
π Consequence: Customs inspection reveals a 3D object; goods seized or re-classified with penalties.
β Mistake 2: Assuming all printed materials are taxed at 10%.
π Consequence: If classified under 4911.91.40.40, you pay 17.5% instead of 10%.
β Mistake 3: Ignoring the "Purpose" of the item.
π Consequence: If a "skeleton diagram" is used for medical diagnosis, it may require additional certifications (FDA, CE).
β Correct Approach:
"Skeleton Diagram, Left Hand, Printed on Paper, for Educational Purposes" β HS: 4911.91.30.00
"3D Skeleton Model, Left Hand, Plastic, for Medical Training" β HS: 9023.00.00.00
π― 7. Conclusion: Precision in Classification Saves Money
π― Remember:
πΉ "Printed Paper = 10% (if 4911.91.30.00)"
πΉ "3D Model = 17.5%"
πΉ "Other Printed = 17.5%"π Final Advice:
- Always provide clear photos and detailed descriptions to Customs.
- Consider pre-ruling with CBP if the product is ambiguous.
- For high-volume shipments, calculate the total landed cost with the 10% vs. 17.5% difference in mind.
π£ Immediate Action:
π Consult a licensed customs broker to confirm the exact subheading based on your product's physical attributes.
π Optimize your supply chain by choosing the lowest-tariff classification where legally applicable.
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Every percentage point saved is pure profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.