Long Roll Special Film
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3919905060 | 40.8% | CN | US | Official Doc |
| 3919102055 | 40.8% | CN | US | Official Doc |
| 3920620090 | 39.2% | CN | US | Official Doc |
| 3920991000 | 41.0% | CN | US | Official Doc |
AI Analysis
ποΈ Long Roll Special Film (Long Roll Plastic Films)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Entry Strategy
π I. Product Definition & Classification: Understanding "Special Film"
"Long Roll Special Film" generally refers to plastic films in the form of long rolls or sheets, used for packaging, protection, industrial lining, or specialized applications. In international trade, the classification heavily depends on the material composition (often inferred as polyester/PET or general plastic) and form (flat, rolled).
Key Distinction Points: * Shape: Must be in the form of rolls, sheets, or strips (flat products). * Material: Typically plastic (non-metalized or specific polymer types like PET). * Classification Logic: Falls under Chapter 39 (Plastics and Articles Thereof), specifically subheadings for plates, sheets, film, foil, and strip.
β οΈ Critical Note:
- If the film is metalized, it may fall under different subheadings (e.g., 3920.62 vs 3920.49). However, the provided data suggests a "non-metalized" or generic plastic inference for cost optimization/standard classification.
- Roll Form: Long rolls are standard for industrial films, fitting the description of "strips" or "films."
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the four possible HS Code classifications with their rationale:
| HS Code | Product Description | Classification Logic / Summary | Total Tax Rate |
|---|---|---|---|
3919.90.50.60 |
Self-adhesive plates, sheets, film, tape, tape, and other flat shapes, of plastics, whether or not in rolls. | Shape Match: Matches "film/long roll" form. Material Inference: Assumed plastic (consistent with HS 39). Note: Often used for self-adhesive films or general flat plastic shapes. |
40.8% |
3919.10.20.55 |
Self-adhesive plates, sheets, film, tape, tape, and other flat shapes, of plastics, whether or not in rolls. | Material & Form: Plastic material, flat shape (film/sheet/strip). Fallback Principle: Fits the "Other" category for self-adhesive or flat plastic shapes. |
40.8% |
3920.62.00.90 |
Other plates, sheets, film, foil and strip, of plastics, non-cellular and non-reinforced. | Material & Form: Matches "film" form. Material Inference: Reasonably inferred as PET (Polyester) or other polyester, non-metalized. Best Fit?: Often the most accurate for pure plastic films without adhesive backing. |
39.2% |
3920.99.10.00 |
Other plates, sheets, film, foil and strip, of plastics. | Material & Form: Plastic material inferred by common sense; shape matches "strip/film." Fallback: Prioritized as the "material-matched" catch-all category. |
41.0% |
π Key Insight:
-3920.62.00.90has the lowest total tax rate (39.2%). This is likely the most cost-effective classification if the film is indeed non-metalized polyester (PET) or similar.
-3919.xxcodes apply if the film has an adhesive backing (self-adhesive). If your "Special Film" is adhesive, these codes apply, but the tax is higher (40.8%).
-3920.99.10.00is a generic fallback with the highest tax (41.0%).
π° III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Date: November 10, 2025 (and subsequent imports)
The tax structure is consistent across all four HS codes due to the application of Section 301 tariffs and IEEPA surcharges on Chinese-origin plastic films.
π― 1. Common Tax Structure for All HS Codes
| Item | Details |
|---|---|
| Basic Duty Rate | Varies by HS Code: - 3919.xx: 5.8% - 3920.62: 4.2% - 3920.99: 6.0% |
| Section 301 Surcharge | +25.0% (Added tariff on Chinese goods) |
| 122 Provision Surcharge | +10.0% (Additional tariff under specific US trade provisions) |
| Total Tax Rate | 39.2% ~ 41.0% (Depends on HS Code) |
| Tax Calculation | CIF Value Γ Total Tax Rate |
| De Minimis Exemption | β Not Eligible (Deny de minimis for Section 301 goods) |
| Legal Basis Path | USITC β Section 301 (Footnote) β IEEPA (122 Provision) |
π― Detailed Breakdown by HS Code
π― 1. 3919.90.50.60 & 3919.10.20.55 (Self-Adhesive/Flat Plastic Shapes)
| Item | Content |
|---|---|
| Basic Duty | 5.8% |
| Section 301 | +25.0% |
| 122 Provision | +10.0% |
| Total Tax | 40.8% |
| Note | Applies if the film is self-adhesive. If not, this classification is risky and may lead to reclassification. |
π― 2. 3920.62.00.90 (Non-Metalized Polyester Films) β Recommended
| Item | Content |
|---|---|
| Basic Duty | 4.2% |
| Section 301 | +25.0% |
| 122 Provision | +10.0% |
| Total Tax | 39.2% |
| Note | Lowest Tax Rate. Best for non-metalized PET films. Ensure product description clearly states "Polyester" or "PET" and "Non-metalized." |
π― 3. 3920.99.10.00 (Other Plastic Films)
| Item | Content |
|---|---|
| Basic Duty | 6.0% |
| Section 301 | +25.0% |
| 122 Provision | +10.0% |
| Total Tax | 41.0% |
| Note | Highest tax rate. Use only if the film does not fit other specific plastic film subheadings. |
π οΈ IV. Customs Clearance Practical Advice (Avoiding Pitfalls)
β 1. Required Documentation (Must-Have)
| Document | Required? | Purpose |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must detail: Material (e.g., PET, PVC, PE), Thickness, Width, Length, Adhesive Status (Yes/No), Metalization Status (Yes/No). |
| β Commercial Invoice | βοΈ | Clearly state "Long Roll Special Film," material composition, and HS Code. |
| β Packing List | βοΈ | Specify number of rolls, weight, and dimensions. |
| β Certificate of Origin | βοΈ | Confirm China origin to apply (or challenge) surcharges. |
| β Lab Test Report | βοΈ | Proves material composition (e.g., FTIR test for polymer type) and confirms non-metalization if claiming 3920.62. |
β 2. Classification Strategy & Tips
π₯ "Adhesive? Use 3919. Non-Adhesive PET? Use 3920.62. Avoid 3920.99!"
| Scenario | Recommended HS Code | Reason |
|---|---|---|
| Self-Adhesive Film (e.g., tape, sticker roll) | 3919.10.20.55 or 3919.90.50.60 |
Matches "self-adhesive" description. Tax: 40.8%. |
| Non-Adhesive, Polyester (PET) Film | 3920.62.00.90 |
Lowest Tax (39.2%). Most accurate for standard industrial plastic films. |
| Non-Adhesive, Other Plastic (PE/PP/PVC) | 3920.99.10.00 |
Fallback if material is not polyester. Tax: 41.0%. |
| Metalized Film | Not Listed Above | Would likely fall under 3920.49 or similar, with different tax rates. Do not use 3920.62 if metalized. |
β 3. Common Mistakes & How to Avoid Them
β Mistake 1: Classifying adhesive film as non-adhesive (3920).
π Consequence: Customs may reclassify to 3919, leading to penalties or delayed clearance.
π Solution: Clearly state "Adhesive" or "Non-Adhesive" in the product description.
β Mistake 2: Using 3920.99.10.00 when 3920.62.00.90 is applicable.
π Consequence: Paying 1.8% higher tax unnecessarily.
π Solution: If the film is polyester (PET), use 3920.62.00.90.
β Mistake 3: Failing to declare "Non-Metalized" status.
π Consequence: If the film is metalized, 3920.62 is incorrect.
π Solution: Provide lab reports proving the absence of metal coating if claiming this code.
π V. Global Market Comparison (2026)
| Market | Recommended HS Code | Total Tax (China Origin) | Key Requirement |
|---|---|---|---|
| πΊπΈ USA | 3920.62.00.90 |
39.2% | Section 301 + IEEPA 122 Provisions apply. |
| π¨π³ China | 3920.62.00.00 |
~6-10% | Standard import duty, no surcharges. |
| πͺπΊ EU | 3920.62.00.90 |
~6-8% | No Section 301 surcharges. CE/RoHS may apply. |
| π¬π§ UK | 3920.62.00.90 |
~6-8% | Post-Brexit tariff, no US surcharges. |
π Conclusion:
- The US market is the most challenging due to 39.2% - 41.0% effective tax rates.
- Optimization Tip: Ensure the film is non-adhesive and polyester-based to lock in the lowest rate (39.2%).
- Avoid self-adhesive classifications unless necessary, as they carry a higher base duty (5.8% vs 4.2%).
π VI. Final Recommendations
β
Action Plan:
1. Confirm Material: Is it PET? If yes, target 3920.62.00.90.
2. Confirm Adhesive: Is it self-adhesive? If yes, target 3919.xx (Tax: 40.8%).
3. Confirm Metalization: Is it metalized? If yes, neither 3920.62 nor the provided codes may be correct.
4. Document Everything: Keep lab reports proving material and non-metalization.
5. Pre-Ruling: Consider applying for an Advance Ruling from US Customs (CBP) to secure the HS Code and tax rate before shipment.
π Pro Tip:
"Accurate HS Code selection saves 1.8% - 1.2% in taxes. On a $100,000 shipment, thatβs $1,200 - $1,800 in savings! Don't leave money on the table."
π£ Ready to Ship?
π Consult a licensed customs broker.
π Prepare detailed product specs.
β Apply for Advance Ruling if unsure.
β¨ Precision in Classification, Profit in Clearance!
πΌ Every Percentage Point Counts!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.