L级天然橡胶条
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4016993510 | 35.0% | CN | US | Official Doc |
| 4001220015 | 35.0% | CN | US | Official Doc |
| 4001100000 | 35.0% | CN | US | Official Doc |
| 4005910000 | 35.0% | CN | US | Official Doc |
| 4016993000 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
🌿 L-Grade Natural Rubber Strips (Raw Material for Industrial Processing)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Entry Strategies
📌 Part 1: Product Definition & Classification: What exactly is "L-Grade Natural Rubber Strip"?
"L-Grade Natural Rubber Strip" refers to raw material derived from Hevea brasiliensis (rubber trees). In international trade, classification depends heavily on the state of vulcanization and the physical form.
1. L-Grade (Technical Specification):
"L" stands for a specific viscosity/viscosity grade in natural rubber standards (typically defined by viscosity or Mooney viscosity). It indicates the flowability and processing characteristics for downstream manufacturing (e.g., tires, gloves, seals).
2. Strip Form (Physical State):
The term "Strip" (or Sheet/Bale in raw form) implies the rubber has been processed into strips or slabs but has not been vulcanized (cross-linked). This is a crucial distinction from finished rubber goods.
⚠️ Key Classification Logic:
- If the rubber is Unvulcanized (raw state, even if cut into strips): It falls under Chapter 40, Heading 4001 or 4005 (Natural Rubber in primary forms).
- If the rubber is Vulcanized (hardened, finished product like seals/gaskets): It falls under Chapter 40, Heading 4016 (Other articles of vulcanized rubber).
- Crucial Distinction: Most "L-Grade Rubber Strips" exported globally are raw, unvulcanized latex or rubber sheets/strips intended for further manufacturing. Therefore, they are classified as Primary Forms, not finished goods.
📦 Part 2: HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided <DATA>, the classification focuses on Natural Rubber in its primary or semi-processed state.
| HS Code | Product Description | Applicable Scenario | Tax Category (Total) |
|---|---|---|---|
4001.22.00.15 |
Natural Rubber in Primary Forms; L-Grade (Specifically matches "L-Grade" and "Natural Rubber" material) |
Raw L-Grade rubber blocks, sheets, or strips ready for compounding | 35.0% |
4001.10.00.00 |
Natural Rubber Latex (If the "strip" is actually a latex formulation or fluid rubber) |
Liquid latex or rubber emulsions | 35.0% |
4005.91.00.00 |
Compound Rubber (Unvulcanized, with added plasticizers/reinforcing agents) |
Pre-compounded rubber strips (semi-finished) | 35.0% |
4016.99.35.10 |
Other Articles of Vulcanized Rubber (Only if the "strip" is already vulcanized into a final product like a gasket) |
Finished vulcanized rubber strips/seals | 35.0% |
4016.99.30.00 |
Other Articles of Vulcanized Rubber (General category for non-specified vulcanized items) |
Other vulcanized rubber parts not elsewhere specified | 35.0% |
🔍 Critical Note:
- The most accurate code for raw L-Grade Natural Rubber Strips is typically4001.22.00.15or4005.91.00.00(depending on if it’s pure rubber or compounded).
- If the product is vulcanized (hardened), it moves to4016(e.g.,4016.99.35.10), but the tax rate remains identical in this dataset.
- Do not classify raw rubber as finished goods (85xx/90xx) or vice versa. Misclassification leads to severe penalties.
💰 Part 3: 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Time: 2025/2026 (Based on provided data)
🎯 1. Base Tariff & Additional Duties Structure
| Tariff Component | Rate | Source/Legal Basis |
|---|---|---|
| Base Duty (MFN) | 0.0% | Free entry for many rubber goods under USFTAA |
| Section 301 Surcharge | +25.0% | USITC List 3/4 on Chinese imports |
| Section 122 Tariff | +10.0% | Additional retaliatory or specific trade measure |
| Total Effective Rate | 35.0% | Sum of all applicable duties |
📌 Explanation:
- Base Duty (0%): Natural rubber in primary forms (HTS 4001) often enjoys 0% base duty.
- Section 301 (+25%): Applies to most Chinese-origin industrial inputs, including rubber.
- Section 122 (+10%): A specific additional tariff layer cited in the data, likely tied to broader trade policies.
- Total 35%: This is the landed cost multiplier before VAT/GST (if any) and handling fees.
📊 Tax Calculation Example
| Item | Value |
|---|---|
| CIF Value | $10,000 |
| Base Duty | $0 |
| Section 301 Duty | $2,500 (25%) |
| Section 122 Duty | $1,000 (10%) |
| Total Duty Payable | $3,500 (35%) |
| De Minimis Exemption? | ❌ NO (Rubber products >$800 are fully taxable; even below $800, high-duty items often deny de minimis) |
🛠️ Part 4: Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance)
✅ 1. Essential Documentation Checklist
| Document | Required | Purpose |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must clearly state: "L-Grade," "Natural Rubber," "Unvulcanized/Vulcanized Status" |
| ✅ Certificate of Origin (CO) | ✔️ | Proves Chinese origin (triggers 35% duty) or Free Trade Agreement (if applicable) |
| ✅ Material Safety Data Sheet (MSDS) | ✔️ | Required for chemical/rubber imports; confirms no hazardous additives |
| ✅ Bill of Lading (B/L) | ✔️ | Must match invoice description exactly |
| ✅ Commercial Invoice | ✔️ | Itemize "Natural Rubber Strips, L-Grade, HTS 4001.22.00.15" |
| ✅ Test Report (Viscosity/Grading) | ✔️ | Proves "L-Grade" classification if challenged |
✅ 2. Declaration Strategy (Key Mnemonics)
🔥 "Grade Matters, Form Defines, Tax Follows!"
| Scenario | Correct Declaration | Risk of Error |
|---|---|---|
| Raw L-Grade Rubber Strips | 4001.22.00.15 (Natural Rubber) |
✅ Correct |
| Pre-compounded Rubber Strips | 4005.91.00.00 (Compound) |
⚠️ Must declare additives |
| Vulcanized Rubber Seals | 4016.99.35.10 (Finished Goods) |
❌ Don’t call it "Raw Rubber" |
| Natural Rubber Latex | 4001.10.00.00 (Latex) |
❌ Don’t confuse with solid strips |
✅ 3. Special Handling Tips
| Situation | Advice |
|---|---|
| Mislabeling "L-Grade" | If the rubber is not truly L-Grade, customs may reclassify to a different subheading, potentially altering duty eligibility. Ensure lab testing matches. |
| Vulcanization Status | Clearly state "Unvulcanized" if it’s raw material. If it’s vulcanized, declare "Vulcanized" and use 4016 codes. Confusion here causes delays. |
| Section 122 Applicability | Verify if the specific rubber type is exempt from Section 122. If not, the +10% is mandatory. |
| De Minimis (Section 321) | Do NOT rely on $800 de minimis exemption for rubber goods if high duty applies. CBP often scrutinizes rubber imports closely. |
🌍 Part 5: Global Market Comparison (2026)
| Country/Region | Recommended HS Code | Duty Rate (China Origin) | Notes |
|---|---|---|---|
| 🇺🇸 USA | 4001.22.00.15 |
35% (0% base + 25% Sec301 + 10% Sec122) | Highest duty burden; plan margins accordingly |
| 🇨🇳 China | 4001.22.00.15 |
0% - 5% | Import duty may be low or exempt for raw materials |
| 🇪🇺 EU | 4001.22.00 |
~0% (Most Free) | No Section 301 equivalent; favorable for EU-bound rubber |
| 🇬🇧 UK | 4001.22.00 |
~0% | Post-Brexit trade deal may offer 0% |
| 🇻🇳 Vietnam | 4001.22.00 |
~0% | Major rubber manufacturing hub; low duty |
📌 Conclusion:
- USA is the most expensive market for L-Grade Natural Rubber due to 35% total duty.
- EU/UK/Asia offer significantly better duty-free access.
- Consider supply chain diversification if exporting heavily to the US.
📌 Part 6: Common Mistakes & Pitfalls (Blood & Tears Lessons)
❌ Mistake 1: Declaring "Rubber Strips" without specifying "L-Grade" or "Natural"
👉 Consequence: Customs may classify as synthetic rubber (higher duty) or require extensive testing.
❌ Mistake 2: Confusing "Unvulcanized" with "Vulcanized"
👉 Consequence: Wrong HS Code → 35% duty vs. potential 0-5% if misclassified incorrectly (but leads to audits/fines).
❌ Mistake 3: Ignoring Section 122 Surcharge
👉 Consequence: Under-declaration of 10% duty → Penalties + Interest.
❌ Mistake 4: Using "Latex" for solid strips
👉 Consequence: Rejection at border; product must match physical form.
✅ Correct Declaration Example:
"Natural Rubber Strips, L-Grade, Unvulcanized, for Industrial Use, Model LR-L100, HTS 4001.22.00.15"
🎯 Part 7: Conclusion: Precision Classification Saves Money!
🎯 Remember the Golden Rules:
🔹 "L-Grade = Natural Rubber; Unvulcanized = Primary Form"
🔹 "USA Duty = 35% (0+25+10); Don’t Underestimate"
🔹 "Document Everything: MSDS, CO, Specs"
📌 Pro Tip:
- If you are importing into the USA, factor in the 35% duty in your pricing model.
- For EU/UK markets, enjoy 0% duty but ensure compliance with REACH/RoHS regulations.
- Consider Pre-Ruling (Advance Ruling) from US CBP if the product’s vulcanization status is borderline.
📣 Immediate Action:
📞 Contact your customs broker with MSDS and Certificate of Origin.
🚀 Ensure your commercial invoice explicitly states "Natural Rubber, L-Grade, Unvulcanized" to avoid reclassification.
✨ Professional Clearance, Starts with Accurate Classification!
💼 Every Percent of Duty Saved is Pure Profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.