Match Holder
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7319909000 | 70.4% | CN | US | Official Doc |
| 7319405050 | 67.5% | CN | US | Official Doc |
| 7616995190 | 87.5% | CN | US | Official Doc |
| 7616995175 | 37.5% | CN | US | Official Doc |
| 9608996000 | 17.5% | CN | US | Official Doc |
| 9608994000 | 17.5% | CN | US | Official Doc |
Product Images
AI Analysis
𧡠Sewing & Writing Instruments: The Hidden World of Pins, Needles, and Parts
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Strategy
π 1. Product Definition & Classification: What Exactly Are "Match Holders" in Trade?
In the context of international trade and HS Code classification, the term "Match Holder" is ambiguous and likely a mistranslation or colloquialism for specific small hardware or stationery items. Based on the provided <DATA>, the relevant categories are Iron/Steel Sewing Needles, Safety Pins, Bodkins, Crochet Hooks (Headings 7319) and Pen Parts/Accessories (Heading 9608), or Aluminum Articles (Heading 7616).
There is no HS Code specifically for "Match Holders" (holders for lighters/fire-starters). However, if "Match Holder" refers to: 1. Needles/Pins for sewing/crafts: Classified under 7319. 2. Parts of Pens/Pencils (sometimes metaphorically called "holders" or "clips"): Classified under 9608. 3. Aluminum fixtures or wire articles: Classified under 7616.
We will proceed by analyzing the most likely interpretations based on the provided <DATA>: Iron/Steel Pins & Needles and Pen Parts/Aluminum Articles.
π¦ 2. HS Code Classification Details (2026 Latest Tariff Authority Cross-Reference)
| HS Code | Product Description | Application Scenario | Material |
|---|---|---|---|
7319.90.90.00 |
Sewing needles, knitting needles, bodkins, crochet hooks, etc.; Safety pins & other pins (Other) | General sewing pins, steel bodkins, generic steel pins not elsewhere specified | Iron/Steel |
7319.40.50.50 |
Safety pins and other pins: Other | Specific safety pins (e.g., decorative, industrial fasteners) | Iron/Steel |
9608.99.60.00 |
Parts of ballpoint pens, markers, fountain pens (Other) | Pen caps, clips, holders, tips (non-9609 parts) | Various (Metal/Plastic) |
9608.99.40.00 |
Parts of articles provided for in 9608.10 and 9608.30 | Pen nibs, barrels, caps specifically for ballpoint/stylograph pens | Various |
7616.99.51.90 |
Other articles of aluminum: Other | Aluminum clips, small fixtures, non-wire aluminum items | Aluminum |
7616.99.51.75 |
Other articles of aluminum: Articles of wire | Aluminum wire goods, flexible aluminum connectors | Aluminum |
π Key Distinction:
- If "Match Holder" refers to a metal pin or needle used in crafts/sewing β 7319.
- If it refers to a stationery component (like a pen holder/cap) β 9608.
- If it is an aluminum fixture β 7616.
- Note: True "lighter/ match holders" are typically classified under 4202 (if leather/fabric) or 8205/8215 (if metal tools), but these are NOT in<DATA>. We strictly adhere to<DATA>.
π° 3. 2026 Latest Tariff Rate Details (Including Surcharges, Policy Add-ons)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Time: 2025β2026 (Current Trade War Context)
π― 1. 7319.90.90.00 ββ Sewing Needles, Bodkins, Other Steel Pins (General)
| Item | Content |
|---|---|
| Basic Tariff | 0.0% |
| Section 301 Surcharge | 7.5% |
| Steel/Aluminum/Copper Surcharge | 50% |
| Total Tariff | 57.5% |
| Tax Calculation | CIF Value Γ 57.5% |
| De Minimis Exemption | β Not Applicable (High duty items usually excluded or limited) |
| Legal Basis | Section 301: 9903.01.06 β Steel/Aluminum Footnote 9903.88.01 |
π Explanation:
- The 50% "Steel/Aluminum/Copper Surcharge" is a critical additional tariff for iron/steel products from China.
- Combined with the standard 7.5% Section 301 rate, the total burden is 57.5%.
- This is a high-duty category. Cost must be fully factored in.
π― 2. 7319.40.50.50 ββ Safety Pins (Specific Category)
| Item | Content |
|---|---|
| Basic Tariff | 0.0% |
| Section 301 Surcharge | 7.5% |
| Steel/Aluminum/Copper Surcharge | 50% |
| Total Tariff | 57.5% |
| Tax Calculation | CIF Value Γ 57.5% |
| De Minimis Exemption | β Not Applicable |
| Legal Basis | Same as above |
π Note:
- Safety pins are also classified as iron/steel articles.
- They incur the same 50% additional surcharge for steel products.
- Total rate: 57.5%.
π― 3. 9608.99.60.00 & 9608.99.40.00 ββ Pen Parts (Holders/Caps/Clips)
| Item | Content |
|---|---|
| Basic Tariff | 0.0% |
| Section 301 Surcharge | 7.5% |
| Steel/Aluminum/Copper Surcharge | 0% (Not classified as primary steel/aluminum structural goods) |
| Total Tariff | 7.5% |
| Tax Calculation | CIF Value Γ 7.5% |
| De Minimis Exemption | β οΈ Check Specifics (Often subject to de minimis rules unless explicitly excluded) |
| Legal Basis | Section 301: 9903.01.04 |
π Explanation:
- Pen parts are not subject to the 50% Steel/Aluminum surcharge.
- Only the standard 7.5% Section 301 tariff applies.
- This is a low-duty category compared to steel pins.
π― 4. 7616.99.51.90 & 7616.99.51.75 ββ Aluminum Articles
A. 7616.99.51.90 (Other Aluminum Articles)
| Item | Content |
|---|---|
| Basic Tariff | 2.5% |
| Section 301 Surcharge | 25.0% |
| Steel/Aluminum/Copper Surcharge | 50% |
| Total Tariff | 77.5% |
| Tax Calculation | CIF Value Γ 77.5% |
| De Minimis Exemption | β Not Applicable |
| Legal Basis | Section 301: 9903.01.05 + Aluminum Footnote 9903.88.01 |
π Explanation:
- Aluminum products face 25% Section 301 + 50% Aluminum Surcharge.
- Total rate: 77.5%.
- This is the highest duty rate in the dataset.
B. 7616.99.51.75 (Aluminum Wire Articles)
| Item | Content |
|---|---|
| Basic Tariff | 2.5% |
| Section 301 Surcharge | 25.0% |
| Steel/Aluminum/Copper Surcharge | 0% (Note: Surcharge may vary by specific wire subtype, but DATA shows no additional 50% here for wire) |
| Total Tariff | 27.5% |
| Tax Calculation | CIF Value Γ 27.5% |
| De Minimis Exemption | β οΈ Check Specifics |
| Legal Basis | Section 301: 9903.01.05 |
π Note:
- Aluminum wire articles may be treated differently than solid aluminum articles.
- Total rate: 27.5%.
- Significantly lower than solid aluminum articles.
π οΈ 4. Customs Clearance Practical Advice (Combat Pit Avoidance Guide)
β 1. Prepare Documentation Checklist (Missing Items = Delay/Rejection)
| Document | Required | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must specify material (Steel/Aluminum), type (Pin/Needle/Part), and use. |
| β Material Composition Certificate | βοΈ | Crucial for 7319 (Steel) vs 7616 (Aluminum) classification. |
| β Product Photos | βοΈ | Clear images of the item, including any labels or packaging. |
| β Commercial Invoice | βοΈ | Must correctly describe the item (e.g., "Steel Sewing Needle" not "Match Holder"). |
| β Packing List | βοΈ | Itemized list to avoid consolidation errors. |
β 2. Declaration Tips (Key Mnemonics)
π₯ "Material Determines Duty, Steel/Aluminum = 50% Extra!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Steel Pins/Needles | 7319.90.90.00 / 7319.40.50.50 |
Misdeclare as "Plastic Parts" β Fraud/Risk |
| Pen Parts | 9608.99.60.00 |
Misdeclare as "Steel Pins" β 57.5% vs 7.5% |
| Aluminum Fixtures | 7616.99.51.90 |
Misdeclare as "Aluminum Wire" β 77.5% vs 27.5% |
π Critical Warning:
- Do NOT use generic terms like "Match Holder" or "Metal Tool" on invoices.
- Be specific: "Steel Safety Pin," "Aluminum Clip," "Pen Cap."
- Misclassification leads to penalties, back taxes, and delays.
β 3. Special Cases Handling
| Situation | Handling Advice |
|---|---|
| Mixed Materials | If a "holder" has steel pins and aluminum body, declare separately or use the highest duty component if integrated. |
| OEM Custom Items | Provide design specs to prove material composition. |
| Small Shipments (De Minimis) | Pen parts (9608) may qualify for de minimis ($800) if not explicitly excluded, but Steel/Aluminum items (7319, 7616) are high-risk and often excluded. |
π 5. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 7319.90.90.00 |
57.5% | None Specific | High Steel Surcharge |
| πΊπΈ USA | 9608.99.60.00 |
7.5% | None Specific | Low Duty |
| πΊπΈ USA | 7616.99.51.90 |
77.5% | None Specific | Highest Duty (Aluminum) |
| π¨π³ China | 7319.90.90.00 |
~5-10% | None | No US Surcharge |
| πͺπΊ EU | 7319.90.90.00 |
~6.5% | CE (if applicable) | No US-style Surcharge |
π Conclusion:
- USA is the most expensive market for these items due to Section 301 + Steel/Aluminum Surcharges.
- Pen Parts (9608) are the most cost-effective to export to the US.
- Aluminum Articles (7616) are the most costly.
π 6. Common Errors & Pitfalls (Blood Lessons)
β Error 1: Calling a steel pin a "plastic accessory"
π Consequence: Customs seizure, fraud charges, 57.5% back tax + fines.
β Error 2: Mixing "Aluminum Wire" (7616.99.51.75) with "Aluminum Articles" (7616.99.51.90)
π Consequence: 77.5% instead of 27.5% if misclassified. 50% difference!
β Error 3: Using "Match Holder" as the product name
π Consequence: Customs cannot classify it. Leads to delay, additional inspection, and potential reclassification at higher duty.
β Correct Practice:
"Steel Sewing Needles, 3cm, Pack of 100, HS 7319.90.90.00"
"Aluminum Wire Clip, 2mm, HS 7616.99.51.75"
π― 7. Conclusion: Professional Declaration, Save Cost!
π― Remember:
πΉ "Steel/Aluminum = 50% Extra in USA!"
πΉ "Pen Parts = Low Duty (7.5%)!"
πΉ "Be Specific, Not Generic!"
π Tip:
If your product is aluminum wire (7616.99.51.75), ensure it is truly wire (flexible, coiled) and not a rigid article. This can save 50% in tariffs (27.5% vs 77.5%).
π£ Immediate Action:
π Consult a Customs Broker + Provide Material Spec + Verify HS Code
π Declare Correctly, Clear Customs Smoothly, Maximize Profit!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Every Percent of Tax Matters!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.