Metal Reinforced Sulfurized Rubber Water Hose
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4009220020 | 37.5% | CN | US | Official Doc |
| 4009210000 | 37.5% | CN | US | Official Doc |
| 4016996010 | 37.5% | CN | US | Official Doc |
Product Images
AI Analysis
πΏ Metal Reinforced Sulfurized Rubber Water Hose (Metal Reinforced Rubber Hose)
π HS Code Classification & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
π I. Product Definition & Core Characteristics: What is a "Metal Reinforced Rubber Hose"?
A Metal Reinforced Sulfurized Rubber Water Hose is a specialized industrial or agricultural fluid transport component. It is not merely a simple rubber tube; it is a composite structure designed to withstand high pressure and mechanical stress.
Key Structural Components: 1. Inner Tube: Made of sulfurized rubber (vulcanized rubber) to ensure water tightness and chemical resistance. 2. Reinforcement Layer: Embedded metal wires or braids (steel or stainless steel) to provide tensile strength and pressure resistance. 3. Outer Cover: Sulfurized rubber protecting the metal core from abrasion, weather, and corrosion.
β οΈ Critical Classification Point:
- The presence of metal reinforcement is the deciding factor.
- If it were only textile reinforcement, it would fall under 4009.11/12/13.
- If it were no reinforcement, it would fall under 4009.41/42/43.
- With metal reinforcement, it strictly falls under 4009.2.
- Warning: Do not confuse this with flexible metal hoses (HS 7308) or plastic hoses (HS 3917). The base material must be rubber.
π¦ II. HS Code Classification Details (2026 Authorized Codes)
Based on the product description "Metal Reinforced Sulfurized Rubber Water Hose," the following HS Codes are applicable. All three codes share the same tariff structure in this dataset.
| HS Code | Product Description | Application Scenario | Reinforcement Type |
|---|---|---|---|
4009.22.00.20 |
Tubes, pipes, and hoses, with a smooth inner surface, of vulcanized rubber other than hard rubber, reinforced only with metal, whether or not fitted with accessories | High-pressure industrial water hoses, fire hoses, hydraulic lines | β Metal Only |
4009.21.00.00 |
Tubes, pipes, and hoses, with a smooth inner surface, of vulcanized rubber other than hard rubber, reinforced only with metal, whether or not fitted with accessories | Standard reinforced rubber hoses, general-purpose metal-reinforced hoses | β Metal Only |
4016.99.60.10 |
Other articles of vulcanized rubber other than hard rubber | Fallback/Alternative for complex composite items where specific hose definitions are ambiguous; includes "other" rubber articles | β Inferred (Less Precise) |
π Expert Note:
-4009.21.00.00&4009.22.00.20are the primary and most accurate classifications for "Metal Reinforced Rubber Hoses."
- The difference between.21and.22often lies in specific sub-sectonal nuances (e.g., inner surface texture or specific fitting types), but for standard water hoses, both are accepted with identical tax rates in this context.
-4016.99.60.10is a "catch-all" for rubber products. It is recommended only if the item doesn't fit the strict "tube/hose" definition of Chapter 40.09, but for a standard hose, 4009 is preferred to avoid scrutiny.
π° III. 2026 Latest Tariff Rate Breakdown (Including Surcharges)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Date: Current 2026 Tariff Schedule
All three classified HS Codes carry the same total tax burden according to the provided data.
π― 1. 4009.22.00.20 β Metal Reinforced Rubber Hoses
| Item | Detail |
|---|---|
| Base Tariff Rate | 2.5% (Standard MFN Rate) |
| Section 301 Tariff (USITC) | +25.0% (Retaliatory tariff on Chinese goods) |
| Section 122 Tariff (IEEPA) | +10.0% (Specific surcharge for Chinese imports) |
| Total Effective Rate | 37.5% |
| Tax Calculation Basis | CIF Value Γ 37.5% |
| De Minimis Eligibility | β No (High rate excludes small packages from exemption) |
| Legal Authority Path | HTSUS:4009.22.00.20 β USITC Footnote 9903 β IEEPA 122 |
π― 2. 4009.21.00.00 β Metal Reinforced Rubber Hoses
| Item | Detail |
|---|---|
| Base Tariff Rate | 2.5% |
| Section 301 Tariff (USITC) | +25.0% |
| Section 122 Tariff (IEEPA) | +10.0% |
| Total Effective Rate | 37.5% |
| Tax Calculation Basis | CIF Value Γ 37.5% |
| De Minimis Eligibility | β No |
| Legal Authority Path | HTSUS:4009.21.00.00 β USITC Footnote 9903 β IEEPA 122 |
π― 3. 4016.99.60.10 β Other Vulcanized Rubber Articles
| Item | Detail |
|---|---|
| Base Tariff Rate | 2.5% |
| Section 301 Tariff (USITC) | +25.0% |
| Section 122 Tariff (IEEPA) | +10.0% |
| Total Effective Rate | 37.5% |
| Tax Calculation Basis | CIF Value Γ 37.5% |
| De Minimis Eligibility | β No |
| Legal Authority Path | HTSUS:4016.99.60.10 β USITC Footnote 9903 β IEEPA 122 |
π Explanation of Tax Components:
- 2.5% Base: The standard Most Favored Nation (MFN) duty for rubber products.
- 25% Section 301: Imposed by USITC to counter unfair trade practices. Applies to most Chinese-origin goods in Chapter 40.
- 10% Section 122: A specific additional surcharge under IEEPA targeting Chinese imports.
- Total 37.5%: This is a significant cost. For a $10,000 shipment, you will pay $3,750 in duties.
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance)
β 1. Required Documentation Checklist (Non-Negotiable)
| Document | Required? | Purpose |
|---|---|---|
| β Commercial Invoice | βοΈ | Must clearly state "Metal Reinforced Sulfurized Rubber Hose." Avoid vague terms like "Rubber Part." |
| β Packing List | βοΈ | Detail dimensions, weight, and number of layers to prove metal reinforcement. |
| β Product Specification Sheet | βοΈ | Must include: 1. Inner material: Sulfurized Rubber 2. Reinforcement: Metal Wire/Braid 3. Outer material: Sulfurized Rubber |
| β Photo of Cross-Section | βοΈ | Crucial! Shows the metal layer visually to Customs. |
| β Label/Tag Photo | βοΈ | Clear view of product name, model, and material composition. |
| β Generic "Hose" Label | β | Risky. May lead to reclassification or delay. |
β 2. Declaration Strategy (Key Tips)
π₯ βBe Specific, Show the Metal, Justify the Rubber!β
| Scenario | Correct Declaration | Incorrect Declaration | Consequence |
|---|---|---|---|
| Standard Metal Hose | "Metal Reinforced Sulfurized Rubber Water Hose, 2-inch, 150 PSI" | "Rubber Hose" | Delayed clearance; Customs may apply higher default rates. |
| With Fittings | Declare as hose with accessories (if included) | Split into "Hose" and "Fittings" | Risk of misclassification for fittings (metal/plastic). |
| High Pressure Hose | Specify "Pressure Rating" in specs | Vague description | Higher scrutiny on safety standards. |
| Mixed Materials | Clearly state % of rubber vs. metal | "Composite Hose" | Potential classification error β Penalty. |
β 3. Special Cases & Handling
| Situation | Recommendation |
|---|---|
| OEM Custom Hoses | Provide original design drawings showing metal reinforcement layer. |
| Hoses with Plastic Fittings | Ensure the rubber portion is dominant. If metal fittings are present, still classify under 4009 if rubber is the primary material. |
| Small Samples (< $800) | Cannot use De Minimis due to 37.5% rate. Declare formally as commercial shipment. |
| Origin Marking | Must be clearly marked "Made in China" on the hose or packaging. |
π V. Global Market Comparison (2026 Outlook)
| Region | Recommended HS Code | Estimated Duty (China Origin) | Key Certifications |
|---|---|---|---|
| πΊπΈ USA | 4009.21.00.00 / 4009.22.00.20 |
37.5% (Base 2.5% + 301+122) | No specific US certification, but ASTM/SAE standards recommended. |
| π¨π³ China | 4009.21.00.00 |
Low (~2.5-5%) | GB Standards |
| πͺπΊ EU | 4009.22.00.00 |
0-3% (Usually preferential) | REACH, RoHS, EN Standards |
| π¬π§ UK | 4009.22.00.00 |
0-3% | UKCA Marking |
| π¨π¦ Canada | 4009.22.00.00 |
0% (USMCA if Canadian origin) | CSA Certification |
π Insight:
- USA is the most expensive market due to Section 301 and Section 122 tariffs.
- EU/UK/Canada have significantly lower or zero duties for Chinese rubber hoses, making them more cost-effective for export if supply chain allows.
π VI. Common Mistakes & How to Avoid Them
β Mistake 1: Classifying as "Plastic Hose" (HS 3917)
π Consequence: Wrong classification. Customs will reject if metal/rubber is evident.
π Fix: Always highlight Sulfurized Rubber and Metal Reinforcement.
β Mistake 2: Classifying as "Textile Reinforced" (HS 4009.1)
π Consequence: Incorrect. Textile hoses have lower duties (often 0-5%). Metal hoses are heavier duty and taxed higher.
π Fix: Provide cross-section photos proving metal wires.
β Mistake 3: Ignoring Section 122 Tariff
π Consequence: Underpayment by 10%.
π Fix: Budget for the full 37.5% in your pricing model.
β Mistake 4: Using "Rubber Tube" as the only description
π Consequence: Ambiguity.
π Fix: Use full descriptive term: "Metal Reinforced Sulfurized Rubber Hose."
π― VII. Conclusion: Professional Clearance, Cost Control, Risk Mitigation
π― Key Takeaway:
πΉ HS Code 4009.2x is mandatory for metal-reinforced rubber hoses.
πΉ Total Duty is 37.5% for US imports from China.
πΉ Documentation must prove metal reinforcement to avoid misclassification penalties.
π Pro Tip:
If you are exporting to the US, consider Value Engineering:
- Can you reduce the metal content? (Risk of functional failure).
- Can you source from a non-China origin? (e.g., Vietnam, Thailand) to potentially avoid Section 301/122 tariffs.
π£ Immediate Action:
π Contact your customs broker with the product cross-section photo.
π Prepare a detailed specification sheet highlighting "Metal Reinforced" and "Sulfurized Rubber."
π΅ Budget 37.5% for US import duties.
β¨ Precision in Classification Saves Money!
πΌ Don't let a 35% tariff difference destroy your profit margin.
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.