Metal Sleeve Brake Rubber Hose
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8708998105 | 37.5% | CN | US | Official Doc |
| 8708305090 | 0.0% | CN | US | Official Doc |
| 4009220020 | 37.5% | CN | US | Official Doc |
| 4009210000 | 37.5% | CN | US | Official Doc |
Product Images
AI Analysis
π Metal Sleeve Brake Rubber Hose (Automotive Brake Lines)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
π One, Product Definition and Classification: What is a "Metal Sleeve Brake Rubber Hose"?
A Metal Sleeve Brake Rubber Hose is a critical safety component in motor vehicles, designed to transmit hydraulic brake fluid under high pressure while absorbing vibration and movement between rigid chassis parts and moving suspension components.
In international trade, this product is NOT classified as a generic "rubber hose" or a generic "auto part." Its classification depends strictly on two factors: 1. Structure: Is it reinforced/combined with metal (the "metal sleeve")? 2. Fittings: Does it come with pre-attached fittings (joints, elbows, flanges)?
β οΈ Critical Distinction:
- If the hose is reinforced with metal and includes fittings, it falls under 4009.22.
- If the hose is reinforced with metal but has NO fittings (bare ends), it falls under 4009.21.
- If it is made of plastics (not rubber) with fittings, it falls under 8708.99.
π¦ Two, HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data <DATA>, here are the exact HS Codes for Metal Sleeve Brake Rubber Hoses:
| HS Code | Product Description | Applicable Scenario | Fitting Status | Reinforcement |
|---|---|---|---|---|
4009.22.00.20 |
Tubes, pipes, and hoses of vulcanized rubber... reinforced or otherwise combined only with metal: With fittings | Brake hoses specifically for vehicles (Headings 8701.21-29, 8702, 8703, 8704, 8705, 8711) | β Yes (Attached) | β Metal |
4009.21.00.00 |
Tubes, pipes, and hoses of vulcanized rubber... reinforced or otherwise combined only with metal: Without fittings | Brake lines intended for assembly, no pre-attached connectors | β No | β Metal |
8708.99.81.05 |
Parts and accessories of motor vehicles... Brake hoses of plastics, with attached fittings | Note: Not Rubber! Only applies if the material is Plastic/Polymer, not vulcanized rubber | β Yes | β Plastic (not metal-reinforced rubber) |
8708.30.50.90 |
Parts and accessories of motor vehicles... Brakes and servo-brakes; parts thereof | General brake parts NOT classified as hoses (e.g., brake pads, calipers, master cylinders) | N/A | N/A |
π Key Insight:
- The term "Metal Sleeve" in your query directly points to "Reinforced or otherwise combined only with metal", which immediately narrows the choice to Chapter 40 (Rubber Products), specifically 4009.21 or 4009.22.
- It is NOT8708unless it is plastic or a different brake component.
- It is NOT8708.99unless it is explicitly made of plastic.
π° Three, 2026 Latest Tariff Rate Details (Including Surtaxes)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: Current rates apply.
π― 1. 4009.22.00.20 ββ Brake Hoses (Rubber, Metal-Reinforced, WITH Fittings)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff (Section 301/Other) | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value Γ 0% = $0 |
| Legal Basis | Specific provision for automotive brake hoses with fittings |
π Interpretation:
- This is a duty-free classification for specific automotive brake hoses with fittings.
- Why 0%? The description explicitly lists "Brake hoses for the vehicles of subheadings 8701.21...". The data shows Base: 0.0%, Additional: 0.0%.
- Advantage: Significant cost saving compared to other rubber goods.
π― 2. 4009.21.00.00 ββ Brake Hoses (Rubber, Metal-Reinforced, WITHOUT Fittings)
| Item | Detail |
|---|---|
| Base Tariff | 2.5% |
| Additional Tariff | 25.0% |
| Total Tax Rate | 27.5% |
| Tax Calculation | CIF Value Γ 27.5% |
| Legal Basis | General rubber hoses reinforced with metal, not specified as "with fittings" for specific vehicles |
π Interpretation:
- No fittings triggers a much higher tax rate.
- Total 27.5% is a heavy burden.
- Reason: Without fittings, it is considered a generic industrial rubber hose rather than a specialized finished automotive part.
- Warning: If you ship hoses with fittings, but declare them as4009.21.00.00(without fittings), you risk misdeclaration penalties.
π― 3. 8708.99.81.05 ββ Plastic Brake Hoses (WITH Fittings)
| Item | Detail |
|---|---|
| Base Tariff | 2.5% |
| Additional Tariff | 25.0% |
| Total Tax Rate | 27.5% |
| Tax Calculation | CIF Value Γ 27.5% |
π Interpretation:
- Only relevant if your "Metal Sleeve" product is actually plastic tubing with metal crimping, not rubber.
- If it is vulcanized rubber, this code is incorrect.
π― 4. 8708.30.50.90 ββ Other Brake Parts (Non-Hose)
| Item | Detail |
|---|---|
| Base Tariff | 2.5% |
| Additional Tariff | 25.0% |
| Total Tax Rate | 27.5% (or 2.5% + 25.0% as noted in data) |
π Interpretation:
- This is a "catch-all" for brake parts that are not hoses.
- Do not use this for brake hoses.
π οΈ Four, Customs Clearance Practical Advice (Real-World Pitfall Avoidance)
β 1. Preparation Checklist (Must-Haves)
| Document | Required? | Explanation |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must state: Material (Vulcanized Rubber), Reinforcement (Metal Sleeve), Application (Brake System). |
| β Photos | βοΈ | Clear images showing the metal sleeve/crimpings and the fittings (if any). |
| β Commercial Invoice | βοΈ | Description must match HS Code: e.g., "Rubber Brake Hose, Metal Reinforced, with Fittings." |
| β Bill of Lading | βοΈ | Ensure no conflicting descriptions (e.g., don't call it "Rubber Tube" if it's a "Brake Hose"). |
β 2. Declaration Tips (Critical Mnemonic)
π₯ "With Fittings = 0%, No Fittings = 27.5%!"
| Scenario | Correct HS Code | Tax Rate | Declaration Description |
|---|---|---|---|
| Brake Hose + Fittings (Metal Sleeve) | 4009.22.00.20 |
0.0% | "Automotive Brake Hose, Vulcanized Rubber, Metal Reinforced, WITH Fittings" |
| Brake Hose + NO Fittings (Metal Sleeve) | 4009.21.00.00 |
27.5% | "Vulcanized Rubber Hose, Metal Reinforced, WITHOUT Fittings" |
| Plastic Brake Hose + Fittings | 8708.99.81.05 |
27.5% | "Plastic Brake Hose, WITH Fittings" |
π Why the huge difference?
- Customs authorities distinguish between semi-finished goods (no fittings) and finished automotive parts (with fittings).
- The specific exemption for brake hoses with fittings is a strategic trade policy to support the automotive industry.
β 3. Special Cases
| Situation | Advice |
|---|---|
| OEM Brake Hoses | Provide the OEM part number and vehicle model compatibility to prove it falls under "vehicles of heading 8701-8711". |
| Mixed Shipments | If a shipment contains both hoses with and without fittings, declare them separately to avoid triggering the higher 27.5% rate for the entire lot. |
| Plastic vs. Rubber | Ensure the material is explicitly stated as Vulcanized Rubber. If it's "Thermoplastic," it goes to 8708 (27.5%). |
π Five, Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Remarks |
|---|---|---|---|
| πΊπΈ United States | 4009.22.00.20 |
0.0% | Best option if fittings are attached. |
| πͺπΊ European Union | 4009.22 |
~0-3% | VAT applies. Generally lower duties for rubber parts. |
| π¨π³ China | 4009.22 |
~5-10% | Import duty may apply. |
| π―π΅ Japan | 4009.22 |
~5% | Moderate duty. |
π Conclusion:
- US Market: The 0.0% rate for4009.22.00.20is a major advantage.
- Risk: Misclassifying as4009.21.00.00(no fittings) costs you 27.5% extra.
- Action: Always include fittings (or declare as such) to qualify for the 0% rate.
π Six, Common Errors & Pitfalls (Lessons Learned)
β Error 1: Shipping brake hoses without fittings but declaring them with fittings.
π Consequence: Customs inspection reveals bare ends β Penalty, Back Taxes (27.5%), and Delay.
β Error 2: Calling a plastic hose a rubber hose.
π Consequence: Misdeclaration. Plastic hoses are taxed at 27.5% (8708.99.81.05), not 0%.
β Error 3: Using generic "Rubber Hose" description.
π Consequence: Customs may default to higher general rubber rates. Be specific: "Brake Hose, Metal Reinforced."
β Correct Action:
"Brake Hose for Automotive Use, Vulcanized Rubber, Metal Reinforced, WITH Fittings, Model XYZ"
β Declared under 4009.22.00.20 β 0.0% Tax.
π― Seven, Conclusion: Professional Declaration, Save Costs!
π― Remember the Golden Rule:
πΉ "With Fittings = 0% Tax. No Fittings = 27.5% Tax."
πΉ "Rubber vs. Plastic matters. Metal Sleeve = Chapter 40, not 8708."
π Pro Tip:
If you are exporting to the US, ensure your Commercial Invoice clearly states:
"Rubber Brake Hose, Metal Reinforced, WITH Fittings, HS Code 4009.22.00.20"
This minimizes customs scrutiny and ensures the 0% duty rate is applied automatically.
π£ Immediate Action:
π Confirm if your hoses have pre-attached fittings.
π· Take clear photos of the fittings and metal crimps.
π Declare as 4009.22.00.20 to save 27.5% in taxes!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Every 27.5% saved is pure profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.