Metal Wall Bracket
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7616995170 | 37.5% | CN | US | Official Doc |
| 7326908630 | 87.9% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 8302496085 | 90.7% | CN | US | Official Doc |
| 8302416080 | 88.9% | CN | US | Official Doc |
Product Images
AI Analysis
ποΈ Metal Wall Bracket (ιε±ε’ε£ζ―ζΆ)
π HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Strategic Customs Strategy
π I. Product Definition & Classification: Do You Really Understand "Wall Brackets"?
A Metal Wall Bracket is a structural fixture used to support, mount, or hold items against a wall. In international trade, the classification heavily depends on the material (Aluminum vs. Iron/Steel) and the specific function (Camera support vs. General mounting).
There are two main pathways for classification: 1. Aluminum Brackets: Often classified under general aluminum article headings if not specifically for cameras. 2. Iron/Steel Brackets: Classified under general metal fixtures, with potential "camera support" variants triggering different tariff rates.
β οΈ Key Distinction:
- If made of Aluminum and used for cameras β Often7616.99
- If made of Iron/Steel and used for cameras β Often7326.90(Subject to high "Section 301" tariffs)
- If made of Iron/Steel and used as general mounting β Often8302.49or8302.41(Also subject to high tariffs)
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority)
Based on the provided data, here are the specific HS Codes, summaries, and tax breakdowns for Metal Wall Brackets.
| HS Code | Summary Description | Material | Function/Category | Total Tax Rate |
|---|---|---|---|---|
7616.99.51.70 |
Metal Camera Stand | Aluminum | Other accessories/components | 37.5% |
7326.90.86.30 |
Metal Camera/Photography Stand | Iron/Steel | Similar supports | 87.9% |
7326.90.86.88 |
Metal Camera Stand | Iron/Steel | Other unlisted specific parts | 87.9% |
8302.49.60.85 |
Metal Bracket | Iron/Steel | Accessories, fits "brackets and similar fixtures" | 90.7% |
8302.41.60.80 |
Metal Bracket | Iron/Steel | Other metal mounting accessories (non-curtain/door) | 88.9% |
π Important Note:
- Aluminum vs. Steel: The material is the primary driver for the HS Code chapter (Chapter 76 for Aluminum, Chapter 73 for Iron/Steel, Chapter 83 for Mounting Hardware). - Function Matters: Using the bracket for cameras/photography (7326.90.86.30) results in a slightly lower rate (87.9%) compared to general mounting hardware (8302.49.60.85at 90.7%), though both are high.
π° III. 2026 Latest Tariff Rate Breakdown (Including Additional Taxes & Policy Add-ons)
β Applicable Country: USA (US)
β Origin: China (CN)
β Effective Date: From 2025 onwards (including subsequent imports)
π― 1. 7616.99.51.70 β Aluminum Camera Stand (Best Case Scenario)
| Item | Details |
|---|---|
| Base Tariff | 2.5% |
| Additional Tariff (Section 301) | 25.0% |
| Section 122 Tariff | 10.0% |
| Total Tax Rate | 37.5% |
| Tax Calculation | CIF Value Γ 37.5% |
| Steel/Aluminum/Copper Additional Duty | β Not Applicable (Only applies to specific steel/aluminum/copper headings, typically Chapter 73 or 83) |
| Legal Basis | Standard China-US trade war tariffs + Section 122 |
π Explanation:
- This is the most favorable option among the provided codes.
- It benefits from the lower base rate of aluminum products.
- The "Steel/Aluminum/Copper additional duty of 50%" (mentioned in other codes) does not apply here, keeping the total significantly lower.
π― 2. 7326.90.86.30 & 7326.90.86.88 β Iron/Steel Camera Stands
| Item | Details |
|---|---|
| Base Tariff | 2.9% |
| Additional Tariff (Section 301) | 25.0% |
| Section 122 Tariff | 10.0% |
| Steel/Aluminum/Copper Additional Duty | 50.0% |
| Total Tax Rate | 87.9% |
| Tax Calculation | CIF Value Γ 87.9% |
| Legal Basis | High-tariff steel goods category |
π Explanation:
- These codes trigger the highest additional tariff category: "Steel, Aluminum, Copper products additional duty: 50%".
- This 50% is on top of the base (2.9%) and Section 301 (25%) tariffs.
- Result: A massive cost increase. A $100 item becomes $187.9.
π― 3. 8302.49.60.85 β General Metal Bracket (Mounting Accessory)
| Item | Details |
|---|---|
| Base Tariff | 5.7% |
| Additional Tariff (Section 301) | 25.0% |
| Section 122 Tariff | 10.0% |
| Steel/Aluminum/Copper Additional Duty | 50.0% |
| Total Tax Rate | 90.7% |
| Tax Calculation | CIF Value Γ 90.7% |
| Legal Basis | General mounting hardware + Steel tariff |
π Explanation:
- This is the highest tariff rate in the dataset.
- Even though the base tariff is higher (5.7%), the 50% additional duty for steel/aluminum/copper pushes the total to nearly 100%.
- This applies to general brackets that do not fall under the specific "camera support" definition of7326.90.
π― 4. 8302.41.60.80 β Other Metal Mounting Accessories
| Item | Details |
|---|---|
| Base Tariff | 3.9% |
| Additional Tariff (Section 301) | 25.0% |
| Section 122 Tariff | 10.0% |
| Steel/Aluminum/Copper Additional Duty | 50.0% |
| Total Tax Rate | 88.9% |
| Tax Calculation | CIF Value Γ 88.9% |
| Legal Basis | Non-curtain/door metal mounting accessories |
π Explanation:
- Similar to8302.49, this incurs the 50% additional duty.
- The base rate is slightly lower than8302.49(3.9% vs 5.7%), resulting in a slightly lower total (88.9% vs 90.7%).
π οΈ IV. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
β 1. Preparation Checklist (Essential Documents)
| Document | Mandatory? | Notes |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must specify material (Aluminum vs. Steel), dimensions, and load capacity. |
| β Material Composition Certificate | βοΈ | Critical for determining if it falls under Chapter 73 (Steel) or 76 (Aluminum). |
| β Product Photos | βοΈ | Clear images showing the bracket structure, mounting holes, and any branding. |
| β Commercial Invoice | βοΈ | Must accurately describe the item as "Metal Camera Stand" or "Metal Wall Bracket" to match the HS Code. |
| β Packing List | βοΈ | Include net/gross weight and dimensions for accurate duty calculation. |
β 2. Declaration Strategy (Key Tips)
π₯ "Material First, Function Second, Avoid the 50% Trap!"
| Scenario | Correct Declaration | Wrong Approach |
|---|---|---|
| Aluminum Bracket | Declare as 7616.99.51.70 (Camera Stand) |
Declare as general steel bracket β 90.7% |
| Steel Camera Bracket | Declare as 7326.90.86.30 |
Declare as general mounting bracket β 90.7% |
| General Steel Bracket | Declare as 8302.41.60.80 (Lowest in steel group) |
Declare as 8302.49.60.85 (Highest in steel group) |
| Mixed Material | Separate shipments by material if possible | Mixed declaration β Risk of misclassification & penalties |
β 3. Special Considerations
| Situation | Handling Advice |
|---|---|
| OEM Custom Brackets | Provide design drawings to prove the specific use (e.g., for cameras) to justify 7326.90. |
| Kit with Camera | If the bracket is sold with the camera, declare the entire kit as the camera system if possible, as the bracket may be considered an accessory. |
| Aluminum vs. Steel | If you can switch to aluminum, you save ~50% in tariffs. Analyze if the cost of aluminum offsets the tax savings. |
| Section 122 Tariff | The 10% Section 122 tariff applies to most of these goods. Ensure your customs broker is aware of this specific policy. |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Estimated Tax | Notes |
|---|---|---|---|
| πΊπΈ USA | 7616.99.51.70 (Aluminum) |
37.5% | Lowest rate in dataset. Avoid steel brackets due to 50% additional duty. |
| π¨π³ China | 7616.99.51.70 |
~5-10% | Standard import duties, no Section 301 or 122. |
| πͺπΊ EU | 7616.99 |
~0-5% | Check for specific anti-dumping duties on aluminum. |
| π¬π§ UK | 7616.99 |
~5% | Post-Brexit tariff schedules may vary slightly. |
| π¨π¦ Canada | 7616.99 |
~0-5% | CUSMA benefits may apply if from US/Mexico. |
π Conclusion:
- USA is the most challenging market due to high additional tariffs.
- Aluminum (7616.99) is significantly cheaper than Steel (7326or8302) for export to the US.
- If you must use steel, choose7326.90.86.30(Camera Stand) over8302.49.60.85(General Mount) to save 2.8% (87.9% vs 90.7%).
π VI. Common Errors & Pitfall Guide (Lessons Learned)
β Error 1: Declaring an Aluminum bracket as a Steel bracket
π Consequence: Unnecessarily incurring the 50% additional duty. Tax jumps from 37.5% to 90.7%.
β Error 2: Declaring a General Mount as a Camera Stand (without proof)
π Consequence: Customs audit, penalty, and back-tariff if function is disproven.
β Error 3: Ignoring Section 122 Tariff
π Consequence: Underpayment of 10%. Customs will assess back duties + interest.
β Error 4: Using vague descriptions like "Metal Part"
π Consequence: High duty by default (often highest available rate) due to lack of specific classification.
β Correct Approach:
"Aluminum Camera Stand, Model XYZ, Lightweight, Anodized Finish, for DSLR/Action Camera"
β Use7616.99.51.70"Steel Photography Support Bracket, Heavy Duty, Matte Black Finish"
β Use7326.90.86.30
π― VII. Conclusion: Professional Declaration, Cost Saving!
π― Remember the Rules:
πΉ "Aluminum Saves: 37.5% vs. Steel's 88%!"
πΉ "Camera Stand (Steel): 87.9% < General Mount (Steel): 90.7%"
πΉ "Section 122 is Always 10%: Don't Forget It!"
πΉ "HS Code Defines Your Profit: Choose Wisely!"
π Pro Tip:
If your product is essential for photography/videography, ensure the description explicitly mentions "Camera Stand", "Photography Support", or "Tripod Mount" to qualify for 7326.90.86.30 instead of the higher-rate general mounting codes.
π£ Immediate Action:
π Consult with a licensed customs broker to pre-classify your specific bracket design.
π Request a Letter of Ruling from US Customs if the product is ambiguous.
π Optimize your supply chain by considering Aluminum alternatives to reduce tariff burden.
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Every Dollar Saved in Tariffs is Pure Profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.