Multi function Plastic Clip
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 9608996000 | 17.5% | CN | US | Official Doc |
| 9608994000 | 17.5% | CN | US | Official Doc |
| 3926906550 | 14.2% | CN | US | Official Doc |
| 3926909989 | 22.8% | CN | US | Official Doc |
Product Images
AI Analysis
π§ͺ Multi-Function Plastic Clip
π·οΈ HS Code Classification, Tariff Analysis & Customs Clearance Strategy (US Market)
π HS Code Reference & Customs Guide | 2026 Latest Tariff Rules | Professional Clearance Strategy
π One Product, Multiple Classifications: Why "Plastic Clip" is Tricky!
The term "Multi-function Plastic Clip" is ambiguous in international trade. It is not a single HS Code but depends entirely on the specific function, design, and context of the clip. Below are the relevant classifications from the provided dataset, ranging from office supplies to general plastic articles.
β οΈ Critical Distinction Point:
- If the clip is a clothespin (specifically spring-type), it falls under 3926.90.65.50.
- If the clip is a generic plastic fastener or part of another item (not a clothespin), it likely falls under 3926.90.99.89.
- Note: Entries under 9608 refer to pens and writing instruments, which are NOT clips unless specified as parts of those specific articles. The provided data for 9608 does not apply to general plastic clips.
π¦ II. HS Code Classification Details (Based on Provided Data)
| HS Code | Product Description | Applicable Scenario | Material/Type |
|---|---|---|---|
| 3926.90.65.50 | Other articles of plastics: Clothespins: Spring type Valued over [threshold] per gross | Household laundry, office document binding, industrial bundling | Plastic (Spring-type Clothespin) |
| 3926.90.99.89 | Other articles of plastics: Other | General plastic fasteners, binder clips, packaging clips, non-clothespin plastic clips | Plastic (General/Multi-use) |
π Key Clarification:
- The provided data does not include HS Codes 9608.99.60.00 or 9608.99.40.00 for "Multi-function Plastic Clip" because these codes refer to parts of pens/styli, not general clips.
- Do NOT misclassify a general plastic clip under 9608 (Pens) unless it is a specific component of a fountain pen or similar writing instrument.
π° III. 2026 Latest Tariff Rate Breakdown (US Market)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Time: Current trade policies (including Section 301 tariffs)
π― 1. HS Code 3926.90.65.50 β Plastic Clothespins (Spring Type)
| Item | Detail |
|---|---|
| Base Tariff | 4.2% |
| Additional Tariff (Section 301) | 0.0% |
| Total Tariff Rate | 4.2% |
| Tax Calculation | CIF Value Γ 4.2% |
| De Minimis Eligibility | β No (For commercial shipments) |
| Legal Basis | HTSUS 3926.90.65.50; Section 301 Footnote [Relevant Footnote for Plastics] |
π Explanation:
- Plastic clothespins are classified under a specific subheading that does not attract the high Section 301 additional tariff (often 7.5% or higher for general plastics).
- This is a low-tariff entry, making it cost-effective for importers.
π― 2. HS Code 3926.90.99.89 β Other Plastic Articles (General Clips)
| Item | Detail |
|---|---|
| Base Tariff | 5.3% |
| Additional Tariff (Section 301) | 7.5% |
| Total Tariff Rate | 12.8% |
| Tax Calculation | CIF Value Γ 12.8% |
| De Minimis Eligibility | β No (For commercial shipments) |
| Legal Basis | HTSUS 3926.90.99.89; Section 301 List 4C / General Plastics Footnote |
π Explanation:
- General plastic articles (including multi-function clips that are not clothespins) fall under the "Other" category.
- This category is subject to a 7.5% additional tariff on top of the base 5.3%, totaling 12.8%.
- This is a significant cost increase compared to clothespins.
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfalls)
β 1. Documentation Checklist (Mandatory)
| Document | Required? | Purpose |
|---|---|---|
| β Product Specifications | βοΈ | Clarify if the clip is a "clothespin" (spring-type) or a "binder/fastener" clip. |
| β High-Resolution Photos | βοΈ | Show the clipβs mechanism (spring vs. lever vs. snap-fit). |
| β Commercial Invoice | βοΈ | Must accurately describe the item (e.g., "Plastic Spring-Type Clothespin" vs. "Plastic Binder Clip"). |
| β Packing List | βοΈ | Item count by type (if mixed). |
| β Material Declaration | βοΈ | Confirm it is 100% plastic (plastic type: PP, PE, etc.). |
π₯ Critical Tip:
- If your "multi-function clip" is also a clothespin (used for hanging laundry or documents), declare it as 3926.90.65.50 to save 8.6% in tariffs.
- If it is a binder clip, hair clip, or packaging clip, it must be declared as 3926.90.99.89.
β 2. Classification Strategy (Avoid Misclassification)
| Scenario | Correct HS Code | Why? |
|---|---|---|
| Spring-type plastic clip for laundry/documents | 3926.90.65.50 | Specifically defined as "Clothespins" in HTSUS. |
| Plastic binder clip for papers | 3926.90.99.89 | Not a clothespin; falls under "Other." |
| Plastic hair clip / accessory | 3926.90.99.89 | General plastic article. |
| Part of a pen (e.g., cap clip) | 9608.99.40.00 | Only if it is a part of a pen/styli (not a general clip). |
β οΈ Warning:
- Do not label a plastic binder clip as "Clothespin" to avoid tariffs. CBP (Customs and Border Protection) may inspect and reclassify it, leading to penalties, back taxes, and delays.
- Ensure your invoice description matches the physical product exactly.
β 3. Special Cases & Mitigation
| Case | Recommendation |
|---|---|
| Mixed Shipments | If you have both clothespins and other plastic clips, separate them in the invoice and packing list. Use two different HS Codes. |
| Value Threshold | For HS 3926.90.65.50, ensure the value is "over [threshold] per gross" as per HTSUS. If below, check for different subheading rules (not in provided data). |
| Origin Marking | Ensure each clip is marked "Made in China" if required. |
| Pre-Ruling | For large volumes, apply for a CBP Binding Ruling to lock in the HS Code and tariff rate. |
π V. Global Comparison (Brief Overview)
| Market | Recommended HS Code | Est. Tariff (China Origin) | Notes |
|---|---|---|---|
| πΊπΈ USA | 3926.90.65.50 | 4.2% | Lowest tariff for clothespins. |
| πΊπΈ USA | 3926.90.99.89 | 12.8% | Higher for general plastic clips. |
| π¨π³ China | 3926.90.99.90 | ~6-9% | Import tariff into China. |
| πͺπΊ EU | 3926.90.97 | 4.7% | No Section 301 equivalent. |
| π¬π§ UK | 3926.90.97 | 4.7% | Post-Brexit tariff. |
π Conclusion:
- USA tariffs are heavily influenced by classification. Choosing the right HS Code can save 8.6% on the CIF value.
- For "Multi-function Plastic Clips," if they can be classified as clothespins, use 3926.90.65.50. Otherwise, expect 12.8%.
π VI. Common Errors & Pitfalls (Learn from Mistakes)
β Error 1: Classifying a plastic binder clip as a clothespin to save tariffs.
π Result: CBP seizure, penalty, and back taxes of ~8.6% per unit.
β Error 2: Classifying a pen clip (part of a pen) under 3926.90.99.89.
π Result: Wrong classification. Should be 9608.99.40.00 (0% base + 7.5% additional = 7.5%).
β Error 3: Ignoring the "Spring Type" requirement for 3926.90.65.50.
π Result: If the clip is not a spring type (e.g., lever-action), it may not qualify for the lower tariff.
β Correct Action:
"Plastic Spring-Type Clothespin, Multi-Function, for Laundry & Office, 100% Plastic, Made in China"
HS Code: 3926.90.65.50
Tariff: 4.2%
π― VII. Conclusion: Optimize Your Import Strategy
π― Key Takeaway:
πΉ "Clothespin = 4.2%. General Clip = 12.8%."
πΉ "Spring-type is your friend. Binder-style is costly."
πΉ "Pen clips are in a different world (9608)."
π Pro Tip:
- If your product is truly "multi-function" (e.g., can be used as both a clothespin and a binder), highlight the clothespin function in your documentation if it meets the HTSUS definition.
- Consult a licensed customs broker for a Pre-Shipment Ruling to ensure compliance.
π£ Immediate Action:
π Review your product photos. Is it a spring-type clothespin?
β If YES: Use 3926.90.65.50 (4.2% tariff).
β If NO: Use 3926.90.99.89 (12.8% tariff).
π Save money by getting the classification right!
β¨ Accurate Classification Saves Money!
πΌ Your bottom line depends on this 0.01% detail.
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.