Narrow Film Strip
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3920992000 | 39.2% | CN | US | Official Doc |
| 3920200015 | 39.2% | CN | US | Official Doc |
| 391910 | 0.0% | CN | US | Official Doc |
| 392062 | 0.0% | CN | US | Official Doc |
Product Images
AI Analysis
ποΈ Narrow Plastic Film Strips (Narrow Film)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π 1. Product Definition & Classification: Do You Really Know "Narrow Plastic Film Strips"?
Narrow plastic film strips are industrial or packaging materials characterized by a width not exceeding 15 mm. They are typically made from thermoplastics such as polyethylene (PE) or polypropylene (PP). In international trade, classification depends heavily on the application (packaging vs. industrial), material type, and whether it is self-adhesive or not.
There are two main categories in customs data: 1. Packaging/Labeling Strips: Often self-adhesive or intended for direct labeling/packaging, usually classified under Chapter 3919 (Self-adhesive plates, sheets, film, etc.). 2. Industrial/Technical Strips: Used for sealing, wrapping, or protective covering, typically non-adhesive, classified under Chapter 3920 (Other plates, sheets, film, foil, and strip).
β οΈ Key Distinction Point:
- If the strip is self-adhesive (has a backing and glue) and width β€ 15 mm β 3919.10
- If the strip is non-adhesive (plain film) and width β€ 15 mm β 3920.62 (for PP) or other subheadings depending on polymer type.
π¦ 2. HS Code Classification Details (Latest Tariff Reference)
| HS Code | Product Description | Application Scenario | Tax Status |
|---|---|---|---|
3919.10 |
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls: Other (Width β€ 15mm typically falls here if adhesive) | Packaging tape, labeling strips, decorative ribbons with adhesive backing | β Failed to retrieve tax information (Error) |
3920.62 |
Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced: Of polymers of propylene | Industrial sealing, wrapping, protective covering, non-adhesive PP strips < 15mm | β Failed to retrieve tax information (Error) |
3920.99.20.00 |
Other plates, sheets, film, foil and strip, of plastics: Of other plastics: Film, strip and sheets... flexible: Other | General flexible plastic film strips not covered by specific PP/PE codes; often broader category | β Total Tax: 29.2% (Base 4.2% + Add. 25%) |
3920.20.00.15 |
Of polymers of propylene: Strip put up in packaging for use as decorative or gift-wrapping ribbon | Gift wrap ribbon, decorative PP strips, specific retail packaging form | β Total Tax: 0.0% (Base 0.0% + Add. 0.0%) |
π Important Note:
-3919.10and3920.62showErrorin tax retrieval. This usually means the specific subheading requires detailed manual verification or is subject to dynamic policy changes. Do not assume 0% tax!
-3920.99.20.00is a "catch-all" for other plastics, subject to high tariffs (29.2%).
-3920.20.00.15is very specific (PP + Gift Wrap) and enjoys 0% tax. Misclassification here can lead to severe penalties.
π° 3. 2026 Latest Tariff Rate Details (Including Additional Taxes)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: 2025-11-10 onwards (for subsequent imports)
π― 1. 3920.99.20.00 ββ Other Flexible Plastic Film Strips (General "Other Plastics")
| Item | Content |
|---|---|
| Base Tariff | 4.2% (ad valorem) |
| USITC Additional Tariff (Section 301) | +25% |
| Total Tax Rate | 29.2% |
| Tax Calculation | CIF Value Γ 29.2% |
| De Minimis Exemption? | β Not Applicable (High-value industrial goods) |
| Legal Basis Path | USITC:3920.99.20.00 β FOOTNOTE:9903.88.01 (if applicable) |
π Explanation:
- This code is often used when the plastic type is not specifically listed elsewhere (e.g., PVC, PS, or mixed polymers).
- The 25% additional tariff is applied due to Section 301 trade measures against China.
- High Cost Alert: A $10,000 shipment incurs $2,920 in duties alone.
π― 2. 3920.20.00.15 ββ PP Strip for Decorative/Gift Wrapping (0% Tax Special Case)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| USITC Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | $0 |
| De Minimis Exemption? | N/A (Already 0%) |
π Explanation:
- This code is highly specific: It must be Polypropylene (PP), in strip form, and packaged for gift-wrapping/decorative use.
- If your PP strips are for industrial sealing or packaging tape backing, this code DOES NOT APPLY. Misuse leads to customs audits.
π― 3. 3919.10 & 3920.62 ββ Error Status (Risk Zone)
| Item | Content |
|---|---|
| Tax Status | Failed to retrieve (Error) |
| Risk Level | π΄ High |
| Recommendation | Do NOT auto-assign tax rate. |
π Explanation:
-3919.10: Typically applies to self-adhesive plastic strips. Tax rates vary by product value and specific HTS subheadings. Requires manual lookup.
-3920.62: Applies to non-adhesive PP strips < 15mm. Base tariff is often 5.7%, but Section 301 may add 7.5%β25% depending on specific origin and product type.
- Critical: These codes are not free and may carry significant hidden costs.
π οΈ 4. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
β 1. Preparation Checklist (Required Documents)
| Document | Mandatory | Notes |
|---|---|---|
| β Product Specifications | βοΈ | Must state: Material (PE/PP/PVC), Width (β€15mm), Adhesive vs. Non-adhesive, Thickness |
| β Photo of Product & Packaging | βοΈ | Show roll/core, label, and any usage instructions |
| β Commercial Invoice | βοΈ | Description must be precise: e.g., "Non-adhesive Polypropylene Film Strip, 10mm width, for industrial sealing" |
| β Declaration Statement | βοΈ | Confirm if product is "Self-adhesive" (Chapter 3919) or "Non-adhesive" (Chapter 3920) |
| β Third-party Testing Report | β Optional | Recommended for chemical composition verification if disputed |
β 2. Declaration Tips (Key Mantra)
π₯ "Adhesive? 3919. Non-adhesive? 3920. Gift Wrap? 0%! Industrial? 29.2%!"
| Scenario | Correct HS Code | Wrong Practice | Consequence |
|---|---|---|---|
| Self-adhesive tape, β€15mm | 3919.10 |
Declare as 3920.xxxx |
β Customs Rejection (Wrong Chapter) |
| Non-adhesive PP strip, industrial use | 3920.62 |
Declare as 3920.99.20.00 |
β οΈ Overpay Tax (5.7% vs 29.2%) |
| PP Strip, gift wrap/decorative | 3920.20.00.15 |
Declare as 3920.62 |
β Loss of 0% Benefit |
| Mixed plastic film, no specific type | 3920.99.20.00 |
Declare as 3919.10 |
β Classification Error |
β 3. Special Cases Handling
| Case | Handling Advice |
|---|---|
| OEM Custom Width | If width is exactly 15mm, ensure it falls under "not exceeding 15 mm" for specific codes. Over 15mm β Chapter 3920 general. |
| Composite Materials | If film is laminated with paper/aluminum, it may fall under different chapters (e.g., 4811, 7607). Check lamination. |
| Adhesive Type | Specify "Pressure-sensitive adhesive" for 3919. Hot-melt or water-activated may have different rules. |
| Origin Verification | Ensure CO (Certificate of Origin) matches the declared country to avoid Section 301 tariffs if eligible for exemption (e.g., Vietnam origin). |
π 5. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (CN Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3920.99.20.00 (General) |
29.2% | None specific | High tariff due to Section 301. 3920.20.00.15 is 0% but strict scope. |
| π¨π³ China | 3920.99.20.00 |
~5% | CCC (if applicable) | Lower base tariff, no Section 301. |
| πͺπΊ EU | 3920.62 |
6.5% | REACH + RoHS | No Section 301. Standard EU duty. |
| π¬π§ UK | 3920.62 |
6.5% | UKCA + REACH | Post-Brexit alignment with EU standards. |
| π¦πΊ Australia | 3920.62 |
5.0% | GSR | Free trade agreement (ChAFTA) may apply if eligible. |
π Conclusion:
- USA is the highest cost market due to 25% Section 301 tariffs on most plastics.
- Zero Tax Opportunity: Only for gift-wrapping PP strips (3920.20.00.15). Do not abuse this code.
- Adhesive vs. Non-Adhesive: This is the most common classification error. Always declare "Self-Adhesive" if it has a sticky backing.
π 6. Common Errors & Pitfall Guide (Lessons Learned)
β Error 1: Declaring self-adhesive tape as "non-adhesive film"
π Consequence: Misclassification penalty, potential 30-day hold, or seizure.
β Error 2: Using 3920.20.00.15 (0% tax) for industrial PP strips
π Consequence: Customs audits, back taxes + interest, and possible fraud allegations.
β Error 3: Ignoring the "Error" status of 3919.10 and 3920.62
π Consequence: Assuming 0% tax leads to massive budget overruns. These codes require manual verification.
β Error 4: Not specifying material (PE vs. PP)
π Consequence: Customs may downgrade to 3920.99.20.00 (29.2%) if material is unclear.
β Correct Practice:
"Non-Adhesive Polypropylene (PP) Film Strip, Width 12mm, for Industrial Sealing, Roll Form, No Adhesive Backing"
π― 7. Conclusion: Precise Classification Saves Money!
π― Remember the Mantra:
πΉ "Adhesive = 3919. Non-Adhesive = 3920. Gift Wrap = 0%. Industrial = 29.2% (USA)."
πΉ "Width β€15mm is key. Material matters. Adhesive changes everything!"
π Tips:
- If your product is PP gift wrap ribbon, fight for 3920.20.00.15.
- If your product is industrial sealing strip, prepare for 29.2% tariff (USA) or verify 3920.62 manually.
- Always provide material specs and adhesive status in the commercial invoice.
π£ Immediate Action:
π Consult a customs broker with product photos + specification sheet.
π Apply for Advance Ruling if unsure, to lock in classification and avoid surprise taxes.
β¨ Professional clearance starts with precise classification!
πΌ Every percentage point saved is pure profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.