Non cellular Rubber Building Profiles
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4008210000 | 35.0% | CN | US | Official Doc |
| 6813810050 | 35.0% | CN | US | Official Doc |
| 4008294000 | 37.9% | CN | US | Official Doc |
| 6813890050 | 35.0% | CN | US | Official Doc |
| 4008196000 | 38.3% | CN | US | Official Doc |
AI Analysis
ποΈ Non Cellular Rubber Building Profiles
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: What Exactly Are "Non Cellular Rubber Building Profiles"?
Non Cellular Rubber Building Profiles are industrial-grade sealing, weatherproofing, and decorative components made from dense, solid (non-foamed) rubber. Unlike flexible foam seals, these profiles are rigid or semi-rigid, offering high durability, compression set resistance, and structural integrity for construction applications.
In international trade, they are primarily classified based on their material structure (solid rubber vs. foam) and form (profiles/edges vs. sheets/rolls). The key distinction lies in whether they are considered "hard rubber" (ebonite) or simply "solid rubber extrusions" for building use.
β οΈ Critical Classification Point:
- If the rubber is solid, non-porous, and shaped into profiles (edges, strips, trims) β It falls under Chapter 40 (Rubber) or potentially Chapter 68 (Articles of Stone/Plaster) if it contains specific friction or mineral fillers.
- Do NOT confuse with "Cellular Rubber" (foam seals), which have different HS codes.
- If the product is primarily a friction material (e.g., for braking systems in building equipment), it may fall under Chapter 68.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the potential HS Codes for Non Cellular Rubber Building Profiles:
| HS Code | Product Description | Application Scenario | Key Material/Form Trait |
|---|---|---|---|
4008.21.00.00 |
Rubber plates, sheets, and strips, non-cellular (non-foam), of vulcanized rubber other than hard rubber | General building seals, door/window profiles, non-friction based | β Solid, non-porous rubber |
4008.29.40.00 |
Other plates, sheets, and strips of rubber, non-cellular, non-hard rubber | Alternative solid rubber profiles, possibly with specific additives | β Solid, but specific sub-category |
4008.19.60.00 |
Rubber Building Profiles (Extruded shapes) | Specifically categorized as "profiles" for construction use | β Shape-specific classification |
6813.81.00.50 |
Friction material articles for braking/clutching, based on rubber | If the profile is used for friction/sealing in moving parts (e.g., elevator brakes) | β Functional classification (Friction) |
6813.89.00.50 |
Other friction material articles | General friction components in building machinery | β Functional classification |
π Key Insight:
-4008.19.60.00is the most precise code for "Rubber Building Profiles" as explicitly stated in the summary.
-4008.21.00.00and4008.29.40.00are broader categories for solid rubber sheets/plates that could include profiles if not specified as "profiles."
-6813.xx.xxapplies only if the primary function is friction (e.g., brake pads made of rubber composite). For general sealing/weatherproofing, Chapter 40 is correct.
π° III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: November 10, 2025 onwards (for subsequent imports)
π― 1. 4008.19.60.00 β Rubber Building Profiles (Most Likely Code)
| Item | Detail |
|---|---|
| Base Tariff | 3.3% (Ad Valorem) |
| Section 301 Surtax | +25% (USITC Footnote) |
| 122 Section Surtax | +10% (IEEPA-based surcharge for Chinese goods) |
| Total Effective Rate | 38.3% |
| Tax Calculation | CIF Value Γ 38.3% |
| De Minimis Exemption | β Not Eligible (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 β USITC:4008.19.60.00 β FOOTNOTE:9903.88.01 |
π Explanation:
- The base tariff is relatively low (3.3%), but the Section 301 (25%) and 122 Section (10%) surcharges significantly increase the cost.
- Total 38.3% is a high-cost scenario. Must be factored into pricing strategies.
π― 2. 4008.21.00.00 β Non-Cellular Rubber Plates/Strips
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surtax | +25% |
| 122 Section Surtax | +10% |
| Total Effective Rate | 35.0% |
| Tax Calculation | CIF Value Γ 35.0% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | IEEPA:9903.01.25 β USITC:4008.21.00.00 β FOOTNOTE:9903.88.01 |
π Note:
- If customs interprets "profiles" as "strips" under this code, the rate is 35.0%, slightly lower than4008.19.60.00.
- However, misclassification risk exists. Must provide clear proof of "profile" shape vs. "strip" form.
π― 3. 4008.29.40.00 β Other Non-Cellular Rubber Sheets/Plates
| Item | Detail |
|---|---|
| Base Tariff | 2.9% |
| Section 301 Surtax | +25% |
| 122 Section Surtax | +10% |
| Total Effective Rate | 37.9% |
| Tax Calculation | CIF Value Γ 37.9% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | IEEPA:9903.01.25 β USITC:4008.29.40.00 β FOOTNOTE:9903.88.01 |
π Note:
- This is a "catch-all" for non-hard, non-cellular rubber products.
- Rate is 37.9%, very close to4008.19.60.00(38.3%).
π― 4. & 5. 6813.81.00.50 & 6813.89.00.50 β Friction Materials (If Applicable)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surtax | +25% |
| 122 Section Surtax | +10% |
| Total Effective Rate | 35.0% |
| De Minimis Exemption | β Not Eligible |
π Critical Warning:
- Only use these codes if the rubber profile is primarily a friction component (e.g., brake pads for building elevators).
- If used for sealing/weatherproofing, DO NOT use these codes. Misclassification can lead to penalties and customs audits.
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
β 1. Preparation Checklist (Non-Negotiable)
| Document | Required | Notes |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must clearly state "Non-Cellular," "Solid Rubber," and "Profile Shape" |
| β Material Safety Data Sheet (MSDS) | βοΈ | Confirms rubber composition (no foam, no hard rubber/ebonite) |
| β Product Photos | βοΈ | Show cross-section to prove non-porous/solid structure |
| β Commercial Invoice | βοΈ | Use precise description: "Vulcanized Non-Cellular Rubber Profiles for Building Sealing" |
| β Certificate of Origin (CO) | βοΈ | Essential for origin verification |
| β Packaging List | βοΈ | Specify dimensions and weight per profile |
β 2. Declaration Strategy (Key Mnemonics)
π₯ βSolid Not Foam, Profile Not Plate, Friction Not Seal, Code Changes!β
| Scenario | Correct HS Code | Incorrect Code | Consequence |
|---|---|---|---|
| Sealing/Weatherproof Profiles | 4008.19.60.00 (38.3%) or 4008.21.00.00 (35%) |
6813.xx.xx |
Risk of audit, misclassification penalty |
| Brake/Friction Rubber Parts | 6813.81.00.50 (35%) |
4008.xx.xx |
Under-taxation risk |
| Foam Rubber Seals | β Not Covered | 4008.xx.xx |
Wrong Chapter β Rejection/Destruction |
| Hard Rubber (Ebonite) Profiles | β Not Covered | 4008.xx.xx |
Different HS Code (4008.11) β Different Tax |
β 3. Special Cases Handling
| Scenario | Advice |
|---|---|
| OEM Custom Profiles | Provide design drawings to prove shape is "profile" not "sheet" |
| Mixed Packaging (Profiles + Foam Seals) | Separate Declaration! Do not mix Chapter 40 and Chapter 40 (cellular) in one line item |
| Rubber with High Mineral Content | If >15% mineral filler by weight, consider Chapter 68 (friction materials) β consult customs broker |
| Origin Diversification | If produced in Vietnam/Malaysia, may qualify for IEEPA Exemption (check current rulings) |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 4008.19.60.00 |
38.3% (incl. 301+122) | None specific | High tariff burden |
| π¨π³ China | 4008.19.60.00 |
~1.5-3% | CCC (if applicable) | Low duty |
| πͺπΊ EU | 4008.19.60.00 |
0-3% (depending on type) | CE (if under machinery) | No Section 301 |
| π¦πΊ Australia | 4008.19.60.00 |
5% | RCM (if electrical) | Moderate duty |
| π―π΅ Japan | 4008.19.60.00 |
0-3% | PSE (if electrical) | Low duty |
π Conclusion:
- USA is the most expensive market due to Section 301 (25%) and 122 Section (10%) surcharges.
- EU/Asia markets are far more favorable with near-zero tariffs.
- Consider supply chain diversification if targeting the US market heavily.
π VI. Common Errors & Pitfalls (Lessons Learned)
β Error 1: Declaring "Rubber Seals" as "Cellular Rubber" (Foam)
π Result: Wrong HS Code, 35-45% tariff difference, potential seizure.
β Error 2: Using "Friction Material" (6813) for Sealing Profiles
π Result: Customsζη under-declaration of value/duty, leading to audits.
β Error 3: Ignoring the "Non-Cellular" Specification
π Result: If proof is not provided, customs may assume "cellular" (foam) or "hard rubber," leading to higher base tariffs or rejection.
β Correct Practice:
βVulcanized Non-Cellular Solid Rubber Profiles, Cross-Section: 10mm x 5mm, for Building Door Sealing, Made in Chinaβ
π― VII. Conclusion: Precision in Classification Saves Money
π― Remember the Mantra:
πΉ βSolid vs. Foam β Check the Porosity!β
πΉ βProfile vs. Sheet β Check the Shape!β
πΉ βFriction vs. Seal β Check the Function!β
πΉ β38.3% is High β Plan Your Cost!β
π Pro Tip:
If your rubber profiles are originating from Vietnam, Malaysia, or Thailand, you may be eligible for IEEPA Surcharge Exemption.
Recommendation: Apply for a Pre-Ruling (Advance Ruling) from US Customs and Border Protection (CBP) before shipment to confirm the exact HS Code and tariff liability.
π£ Immediate Action:
π Engage a licensed customs broker.
πΈ Provide high-res photos of the rubber profileβs cross-section.
π Ensure Smooth Clearance, Avoid Delays, Maximize Profit!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Every Percent of Tariff Counts β Know Your Code!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.