PET Aluminum Plated Tape Base Film
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3920620020 | 39.2% | CN | US | Official Doc |
| 3920620050 | 39.2% | CN | US | Official Doc |
| 7607205000 | 17.5% | CN | US | Official Doc |
| 7607201000 | 13.7% | CN | US | Official Doc |
| 3919102055 | 40.8% | CN | US | Official Doc |
| 3919905060 | 40.8% | CN | US | Official Doc |
Product Images
AI Analysis
π PET Aluminum Plated Tape Base Film (Metallized PET)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: What Exactly is "Metallized PET Film"?
PET Aluminum Plated Tape Base Film (commonly known as Metallized PET Film) is a composite material where a thin layer of aluminum is vacuum-deposited onto a Polyethylene Terephthalate (PET) film. It is widely used in gift wrapping, packaging, decorative tapes, and industrial insulation due to its high reflectivity, barrier properties, and aesthetic appeal.
In international trade, classification depends heavily on: 1. Whether it is self-adhesive (has backing glue); 2. Its form (rolls, width); 3. Its specific application (e.g., gift wrap vs. other uses).
β οΈ Key Distinction Points:
- If it is self-adhesive (has glue on one side) β It falls under Chapter 3919 (Self-adhesive plastic tapes).
- If it is non-adhesive (bare metallized film) β It may fall under Chapter 3920 (Other plastic plates, sheets, film) or Chapter 7607 (Aluminum foil, if the metal layer dominates).
- Specific Use: If explicitly classified as "Gift Wrap", specific subheadings apply with different tax implications.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authoritative Comparison)
Based on the provided data, here are the precise HS Codes and their corresponding descriptions. Note that the classification hinges on whether the product is self-adhesive or non-adhesive, and its width.
| HS Code | Product Description | Application Scenario | Key Features | Tax Rate (Total) |
|---|---|---|---|---|
3919.10.20.55 |
Self-adhesive plates, sheets, film, foil, tape, strip, and other flat shapes, of plastics, whether or not in rolls: In rolls of a width not exceeding 20 cm: Other Other: Other | Self-adhesive metallized PET tape, narrow rolls (<20cm width), not specified as gift wrap | β
Self-adhesive β Not gift wrap β Width β€ 20 cm |
30.8% |
3919.90.50.60 |
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls: Other: Other Other | Self-adhesive metallized PET film/tape, wider rolls (>20cm) or other forms | β
Self-adhesive β Width > 20 cm (or other) |
0.0% |
7607.20.50.00 |
Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm: Backed: Other | Metallized PET used as a functional backing for aluminum foil, not primarily decorative | β
Aluminum-backed β Not decorative β Thickness β€ 0.2 mm |
7.5% |
7607.20.10.00 |
Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm: Backed: Covered or decorated with a character, design, fancy effect or pattern | Decorative aluminum-backed films with patterns/designs | β
Decorative/Printed β Backed β Thickness β€ 0.2 mm |
0.0% |
3920.62.00.20 |
Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced...: Of poly(ethylene terephthalate) Metallized PET film: Gift wrap | Non-adhesive Metallized PET film specifically used for Gift Wrapping | β Not self-adhesive β Gift Wrap β PET-based |
29.2% |
3920.62.00.50 |
Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced...: Of poly(ethylene terephthalate) Metallized PET film: Other | Non-adhesive Metallized PET film for General/Industrial Use (not gift wrap) | β Not self-adhesive β Not gift wrap β PET-based |
29.2% |
π Critical Reminder:
- Self-adhesive vs. Non-adhesive: This is the most common classification error. If your product has a pressure-sensitive adhesive layer, it must go under 3919, not 3920 or 7607.
- Gift Wrap Specificity: If the film is marketed and used as gift wrap,3920.62.00.20applies, but it still carries a high tax rate due to the "Additional Tariff."
- Aluminum Foil vs. Metallized Film: If the aluminum layer is merely a thin vapor deposit (<0.005mm), it is usually classified as plastic film (3920) or plastic tape (3919). If the aluminum is a thicker foil (>0.005mm), it may be classified under 7607 (Aluminum Foil). The provided data suggests7607applies if it is "backed" and decorative or general aluminum foil with plastic backing.
π° III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: 2025/2026 (Based on provided data)
π― 1. 3919.10.20.55 ββ Self-adhesive Metallized Tape (β€20cm Width, Non-Gift)
| Item | Content |
|---|---|
| Base Tariff | 5.8% (ad valorem) |
| Section 301 Additional Tariff | +25.0% |
| Total Tariff | 30.8% |
| Tax Calculation | CIF Value Γ 30.8% |
| De Minimis Eligibility | β No (High tariff threshold prevents de minimis relief) |
| Legal Basis | USITC 3919.10.20.55 β Section 301 Footnote 3 |
π Explanation:
- This is a high-tariff item because it is a self-adhesive plastic product from China.
- The 25% additional tariff is applied under Section 301 of the Trade Act.
- Even though the base rate is low (5.8%), the total cost increases significantly.
π― 2. 3919.90.50.60 ββ Self-adhesive Metallized Film (Other/Width >20cm)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Tariff | 0.0% |
| Total Tariff | 0.0% |
| Tax Calculation | CIF Value Γ 0% |
| De Minimis Eligibility | β Yes (Potentially eligible if value < $800) |
| Legal Basis | USITC 3919.90.50.60 β No Section 301 footnote |
π Note:
- This is a lucky classification! If your self-adhesive film does not fit the "β€20cm width" or "gift wrap" descriptions, it may qualify for 0% tariff.
- Ensure the product documentation clearly states the width and lack of specific "gift wrap" designation to support this classification.
π― 3. 7607.20.50.00 & 7607.20.10.00 ββ Aluminum Foil with Plastic Backing
| HS Code | Base Tariff | Additional Tariff | Total Tariff |
|---|---|---|---|
7607.20.50.00 (Backed, Other) |
0.0% | 7.5% | 7.5% |
7607.20.10.00 (Decorative/Printed) |
0.0% | 0.0% | 0.0% |
π Explanation:
- Decorative/Printed Aluminum Foil (7607.20.10.00) has 0% total tariff. This is advantageous if your product can be classified as decorative aluminum foil with backing.
- Non-Decorative Aluminum Foil (7607.20.50.00) has a 7.5% total tariff.
- Crucial: This classification requires the product to be considered "Aluminum Foil" (thickness >0.005mm typically) backed by plastic. If it's just metallized plastic film, this classification may be rejected by customs.
π― 4. 3920.62.00.20 & 3920.62.00.50 ββ Non-Adhesive Metallized PET Film
| HS Code | Description | Base Tariff | Additional Tariff | Total Tariff |
|---|---|---|---|---|
3920.62.00.20 |
Metallized PET Film: Gift Wrap | 4.2% | 25.0% | 29.2% |
3920.62.00.50 |
Metallized PET Film: Other | 4.2% | 25.0% | 29.2% |
π Explanation:
- Both non-adhesive PET film classifications carry a high 25% additional tariff under Section 301.
- The base rate is 4.2%, but the total hits 29.2%.
- No distinction in tariff rate between "Gift Wrap" and "Other" in terms of total tax, but proper description is still required for compliance.
π οΈ IV. Customs Clearance Practical Advice (Avoiding Pitfalls)
β 1. Preparation Checklist (Mandatory)
| Document | Required | Explanation |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must detail: Material composition (PET %, Aluminum %), thickness, adhesive type (if any), width, and roll length. |
| β Product Photos | βοΈ | Clear images showing the shiny metallized surface, edges, and any printed designs. |
| β Commercial Invoice | βοΈ | Must specify "Metallized PET Film" or "Self-Adhesive PET Tape," NOT generic "Plastic Sheet." |
| β Certificate of Origin | βοΈ | Required for origin verification. |
| β Usage Declaration | βοΈ | Explicitly state use: "For Gift Wrapping," "For Industrial Packaging," or "For Decorative Tape." |
| β Thickness Certificate | βοΈ | If claiming 7607 classification, proof of aluminum layer thickness is critical. |
β 2. Declaration Tips (Key Strategies)
π₯ βAdhesive vs. Non-Adhesive is Key, Width Matters for 3919, Description Determines Tax!β
| Scenario | Correct Declaration | Incorrect Declaration | Consequence |
|---|---|---|---|
| Self-adhesive tape, width 10cm, no print | 3919.10.20.55 (30.8%) |
3919.90.50.60 |
Under-declaration of tax β Penalty + Back Tax |
| Self-adhesive film, width 50cm | 3919.90.50.60 (0.0%) |
3919.10.20.55 |
Over-declaration β Unnecessary cost |
| Non-adhesive gift wrap | 3920.62.00.20 (29.2%) |
7607.20.10.00 (0.0%) |
Misclassification β High risk of seizure |
| Non-adhesive industrial film | 3920.62.00.50 (29.2%) |
3920.62.00.20 |
Minor description error, but same tax rate |
| Aluminum foil with PET backing, printed | 7607.20.10.00 (0.0%) |
3919.10.20.55 (30.8%) |
Major risk: If not actually "foil," customs will reclassify and penalize |
β 3. Special Cases & Recommendations
| Situation | Recommendation |
|---|---|
| OEM Custom Tape | Provide client contract and design files to prove "Gift Wrap" or "Decorative" status if claiming lower taxes. |
| Mixed Shipments | Do not mix self-adhesive and non-adhesive films in one HS Code declaration. Separate them clearly. |
| Claiming 0% Tariff | For 3919.90.50.60 or 7607.20.10.00, ensure product specs strictly match the description (e.g., width >20cm for 3919, or decorative for 7607). |
| Gift Wrap Misclassification | Customs may reject "Gift Wrap" claim if the film is also suitable for industrial use. Declare the primary commercial use. |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Total Tariff | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3919.90.50.60 or 3920.62.00.50 |
0% ~ 29.2% | None required for customs | Highest complexity due to Section 301 |
| π¨π³ China | 3919.90.50.60 |
~5% | CCC (if applicable) | Lower base tariffs |
| πͺπΊ EU | 3919.90.90 |
~3-5% | REACH | No Section 301 equivalent |
| π¦πΊ Australia | 3919.90.90 |
5% | None | Standard MFN rates |
π Conclusion:
- The USA is the most challenging market due to high additional tariffs on plastic and aluminum products.
- Strategy: If possible, design products to fit the 0% tariff categories (3919.90.50.60or7607.20.10.00) by adjusting width or decorative features, but only if factually accurate.
π VI. Common Mistakes & Pitfalls (Blood-Test Lessons)
β Mistake 1: Calling all metallized films "Aluminum Foil" to get 0% tax (7607)
π Consequence: If the aluminum layer is too thin (<0.005mm), customs will reclassify as 3920 or 3919 and charge 29-30% + penalties.
β Mistake 2: Ignoring the "Width" rule for self-adhesive tapes
π Consequence: A 15cm tape declared under the wrong subheading may be misclassified, leading to 30.8% instead of 0%.
β Mistake 3: Claiming "Gift Wrap" for industrial packaging film
π Consequence: Customs may deny the "Gift Wrap" subheading, but since the tax rate is the same (29.2%) for 3920, the main issue is compliance risk and potential inspection delays.
β Correct Practice:
βSelf-Adhesive Metallized PET Tape, 10mm Width, Silver, for Craft Gift Wrapping, Roll Length 50m, Model XYZβ
π― VII. Conclusion: Precise Classification, Maximize Profit!
π― Remember the Mantra:
πΉ βAdhesive? Check Width! Non-Adhesive? Check Use! Aluminum? Check Thickness!β
πΉ β0% is possible, but only if the product matches the code exactly. Donβt lie, or you pay more.β
π Pro Tip:
If your product is borderline between
3919and3920, consult a customs broker before shipment.
For high-volume shipments, consider applying for an Advance Ruling from US Customs to lock in the HS Code and tax rate.
π£ Take Action Now:
π Provide product specs (thickness, adhesive, width, use) to your customs broker.
π Get the right HS Code, pay the right tax, and clear customs smoothly!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Your Profit Margin Depends on This Details!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.