Processing...

Thinking...

AI is analyzing your product

60s

PVC Table Runner

CN β†’ US
HS Code Tariff Rate Origin Destination Doc
3921905050 39.8% CN US Official Doc
3919905060 40.8% CN US Official Doc
3924901050 13.3% CN US Official Doc
3921125000 41.5% CN US Official Doc
3919102055 40.8% CN US Official Doc

Product Images

AI Analysis

πŸ–₯️ PVC Table Runner / Tablecloth (PVCζθ΄¨ζ‘ŒεΈƒη±»)


🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Strategic Compliance Strategy
πŸ“Œ I. Product Definition & Classification: Do You Really Understand "PVC Table Runners"?

A PVC Table Runner or Tablecloth is a flat, plastic sheet or film used for table decoration and protection. In international trade, its classification depends heavily on its physical form (is it a simple sheet, a self-adhesive tape, or a finished textile-like cover?) and its specific use.

For US Customs (CBP) purposes, PVC products are typically split between: 1. Plastics and Articles Thereof (Chapter 39): * Flat sheets/films/foils (3921): If the product is essentially a PVC sheet/roll used as a table covering. * Self-adhesive plates/films (3919): If the product has adhesive backing or is applied as a decorative film. 2. Tableware (Chapter 39 or 63): * Finished Table Covers (3924): If it is specifically shaped or manufactured as a "table cover" or "tablecloth."

⚠️ Key Distinction Point:
- If it is a finished tablecloth with specific shaping (even if PVC), it often falls under 3924.90 (Tableware), which has a significantly lower base duty.
- If it is a raw sheet, film, or flat plastic article (even if used for tables), it falls under 3921 or 3919, which are subject to higher base duties + heavy trade war tariffs.
- Misclassification is the #1 risk: Declaring a simple PVC sheet as a "Tablecloth" to get 13.3% tax is risky if it lacks the specific characteristics of a finished article. CBP may reclassify it as a "Plastic Sheet" (3921), triggering the 41.5% rate.


πŸ“¦ II. HS Code Classification Details (2026 Latest Tariff Authority Cross-Reference)

Based on the provided data for PVC Table Runners, here are the 5 possible HS Codes and their corresponding tax structures.

HS Code Product Description Application Scenario Total Tax Rate Tax Breakdown
3924.90.10.50 PVC Tablecloth/Table Cover Finished table cover, specific to "table covers" category 13.3% Base: 3.3%
Section 301: 0%
122 Clause: 10%
3921.90.50.50 PVC Table Cover (Plastic Sheet Form) PVC table cover, form: Plastic sheet/film/foil 39.8% Base: 4.8%
Section 301: 25.0%
122 Clause: 10%
3919.90.50.60 PVC Self-Adhesive Flat Product PVC flat plastic product, self-adhesive film/plate characteristics 40.8% Base: 5.8%
Section 301: 25.0%
122 Clause: 10%
3921.12.50.00 PVC Chlorinated Polymer Film PVC vinyl polymer film/plate, no conflict with other categories 41.5% Base: 6.5%
Section 301: 25.0%
122 Clause: 10%
3919.10.20.55 PVC Flat Plastic Product (Other) PVC flat plastic product, no material conflict with other categories 40.8% Base: 5.8%
Section 301: 25.0%
122 Clause: 10%

πŸ” Critical Observation:
- 3924.90.10.50 is the "Golden Key" if your product qualifies as a finished Table Cover. It saves you ~26-28% in duties compared to the other options.
- 3921 and 3919 codes are "Traps" for PVC sheets. If CBP determines your runner is just a "plastic sheet" and not a "finished table cover," you will face 39.8% - 41.5% tax.
- The 122 Clause (10%) applies to ALL these codes (likely related to specific Chinese import restrictions or environmental clauses).
- Section 301 (25%) applies to ALL codes except 3924.90.10.50 (which has 0% Section 301). This is the massive differentiator.


πŸ’° III. 2026 Latest Tariff Rate Detailed Explanation (Including Surtaxes, Policy Add-ons)

βœ… Applicable Country: United States (US)
βœ… Origin: China (CN)
βœ… Effective Time: Current Trade War Policies (Section 301 + 122 Clause)

🎯 1. 3924.90.10.50 β€”β€” PVC Table Cover (The Low-Tax Option)

Item Content
Base Duty Rate 3.3% (ad valorem)
USITC Surtax (Sec 301) 0.0% (Exempt or not applicable to Tableware)
122 Clause Surtax +10.0%
Total Tax Rate 13.3%
Tax Calculation CIF Value Γ— 13.3%
De Minimis Eligibility ❌ No (Commercial shipment, > $800)
Legal Basis Path HTSUS:3924.90.10.50 β†’ FOOTNOTE:122

πŸ“Œ Explanation:
- This is the most favorable classification if your product is a finished "table cover."
- Why 0% Section 301? Tableware (Chapter 3904-3924) often enjoys lower or zero Section 301 tariffs compared to raw plastics (3921/3919).
- Risk: You must prove it is a "finished article" not just a "roll of plastic."


🎯 2. 3921.90.50.50 β€”β€” PVC Table Cover (Plastic Sheet Form)

Item Content
Base Duty Rate 4.8%
USITC Surtax (Sec 301) +25.0%
122 Clause Surtax +10.0%
Total Tax Rate 39.8%
Tax Calculation CIF Value Γ— 39.8%
De Minimis Eligibility ❌ No
Legal Basis Path HTSUS:3921.90.50.50 β†’ FOOTNOTE:301 β†’ FOOTNOTE:122

πŸ“Œ Explanation:
- CBP views this as a Plastic Sheet/Film, not a finished tablecloth.
- The 25% Section 301 tariff applies because raw plastics and semi-finished plastic articles are heavily targeted.
- Cost Impact: This is 3x higher than the 3924 code.


🎯 3. 3919.90.50.60 & 3919.10.20.55 β€”β€” Self-Adhesive/Flat PVC Products

Item Content
Base Duty Rate 5.8%
USITC Surtax (Sec 301) +25.0%
122 Clause Surtax +10.0%
Total Tax Rate 40.8%
Tax Calculation CIF Value Γ— 40.8%

πŸ“Œ Explanation:
- If your table runner has adhesive backing (e.g., self-adhesive table mats), it falls under 3919 (Self-adhesive plates/films).
- Why High Tax? These are considered industrial/plastic materials, not consumer tableware.
- Warning: If you declare a non-adhesive runner under 3919, CBP will reject it.


🎯 4. 3921.12.50.00 β€”β€” PVC Chlorinated Polymer Film

Item Content
Base Duty Rate 6.5%
USITC Surtax (Sec 301) +25.0%
122 Clause Surtax +10.0%
Total Tax Rate 41.5%
Tax Calculation CIF Value Γ— 41.5%

πŸ“Œ Explanation:
- This is the most expensive option. It applies if the product is classified as a generic PVC film/plate without any specific "table cover" identity.
- Use only as a last resort if no other classification fits.


πŸ› οΈ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance Guide)

βœ… 1. Required Documentation Checklist (None Missing)

Document Mandatory? Notes
βœ… Product Specification Sheet βœ”οΈ Must describe material (100% PVC), thickness, dimensions, and finish (e.g., "finished table runner with hemmed edges").
βœ… Product Photos (Clear) βœ”οΈ Show the entire product, edges, and any packaging. Must look like a "table cover," not a raw roll.
βœ… Commercial Invoice βœ”οΈ Description: "PVC Table Runner/Table Cover, Finished Article" (Avoid vague terms like "Plastic Sheet").
βœ… Packing List βœ”οΈ List items individually if mixed.
βœ… Structure/Material Diagram βœ”οΈ If disputed, show it is not a self-adhesive tape (unless it is).

βœ… 2. Declaration Strategy (Key Mantra)

πŸ”₯ "Finish Matters! Sheet = 40%, Cover = 13%! Shape Your Declaration!"

Scenario Correct Declaration Incorrect Declaration Consequence
Finished Table Runner (with hems, specific size, ready to use) 3924.90.10.50 "PVC Plastic Sheet" Save 27% tax!
Raw PVC Roll/Sheet (cut to size, no finishing) 3921.90.50.50 "Table Cloth" CBP reclassification β†’ Back taxes + Penalty
Self-Adhesive Table Mat 3919.90.50.60 "Table Cover" Misclassification β†’ Delay/Fine
PVC Film for Packaging 3921.12.50.00 "Table Runner" High Tax + Audit

πŸ“Œ Critical Tip:
- If your "Table Runner" is just a flat sheet of PVC with no edges, no branding, and no specific shape, do NOT declare it as 3924. CBP will catch this.
- However, if it is cut to a specific rectangular shape with hemmed or sealed edges, it is more likely to be accepted as a "finished article" (3924).


βœ… 3. Special Situations Handling

Situation Handling Advice
OEM Custom Runners Provide design specs showing it is tailored for table use.
Mixed Containers (Plastic Sheets + Table Runners) Must Separate! Declare 3921 for sheets and 3924 for finished covers. Do not lump them.
Self-Adhesive Runners Clearly state "Self-Adhesive PVC Table Mat" β†’ Use 3919.
High-Value Runners Consider Advance Ruling from CBP to lock in 3924.90.10.50 classification.

🌍 V. Global Market Comparison (2026 Latest)

Country/Region Recommended HS Code Tariff (China Origin) Notes
πŸ‡ΊπŸ‡Έ USA 3924.90.10.50 13.3% Best option if classified as finished cover.
πŸ‡ΊπŸ‡Έ USA (Risk) 3921.90.50.50 39.8% If CBP reclassifies as plastic sheet.
πŸ‡ͺπŸ‡Ί EU 3924.90.10.00 ~5-10% + VAT Generally lower tariffs for tableware.
πŸ‡¨πŸ‡³ China 3924.90.10.00 10-13% Import tariff.
πŸ‡¬πŸ‡§ UK 3924.90.10.00 ~5-10% Post-Brexit tariffs.

πŸ“Œ Conclusion:
- USA is the only major market with this drastic tariff gap (13.3% vs 39.8%) due to Section 301.
- Always aim for 3924 if the product is a finished table cover.


πŸ“Œ VI. Common Mistakes & Pitfalls (Blood Lessons)

❌ Mistake 1: Declaring a simple PVC sheet as "Table Cover" to get 13.3% tax.
πŸ‘‰ Consequence: CBP reclassifies as 3921 β†’ Back taxes of 26% + Interest + Penalty.

❌ Mistake 2: Declaring a finished tablecloth as "Plastic Sheet" to avoid scrutiny.
πŸ‘‰ Consequence: You pay 39.8% instead of 13.3% β†’ Unnecessary Profit Loss.

❌ Mistake 3: Ignoring the 122 Clause (10%).
πŸ‘‰ Consequence: This 10% applies to ALL PVC plastic articles from China. Do not forget to budget for it.

❌ Mistake 4: Using vague descriptions like "Plastic Table Mat."
πŸ‘‰ Consequence: CBP will investigate the physical form. Be precise: "Finished PVC Table Runner with Hemmed Edges."

βœ… Correct Declaration Example:

"PVC Table Runner, Finished Article, Rectangular Shape, Hemmed Edges, 100% Polyvinyl Chloride, For Table Decoration, Model TR-001"


🎯 VII. Conclusion: Professional Declaration, Save Cost, Ensure Smooth Clearance!

🎯 Remember the Mantra:

πŸ”Ή "Sheet is 40%, Cover is 13%! Finish Matters!"
πŸ”Ή "122 Clause is 10% for all, but 301 is the killer!"
πŸ”Ή "If it's finished, claim 3924. If it's raw, expect 3980."


πŸ“Œ Pro Tip:
If you are unsure if your runner qualifies as a "finished article," apply for a CBP Advance Ruling. It is worth the small fee to save thousands in potential back taxes.


πŸ“£ Immediate Action:

πŸ“ž Contact your customs broker today.
πŸ“Έ Send clear photos of the finished product.
πŸ“ Review your commercial invoice description.
πŸš€ Ensure your PVC Table Runners clear US customs at the lowest possible rate!


✨ Professional customs clearance starts with accurate classification!
πŸ’Ό Every percentage point saved is pure profit!

Customer Reviews

About HS Code Classification

The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.

Each HS code follows a hierarchical structure:

  • Chapter (2 digits) β€” Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
  • Heading (4 digits) β€” More specific grouping within the chapter
  • Subheading (6 digits) β€” Internationally standardized breakdown, used by all WCO member countries
  • National subdivisions (8-10 digits) β€” Country-specific extensions for further classification, such as US HTSUS 10-digit codes

Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.

When importing from CN to US, the applicable tariff rates may include:

  • Most-Favored-Nation (MFN) rate β€” The standard duty rate applied to WTO members
  • General rate β€” Applied to countries without trade agreements
  • Trade remedy duties β€” Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties

The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.