PVC透明卷
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3921125000 | 41.5% | CN | US | Official Doc |
| 3921121950 | 40.3% | CN | US | Official Doc |
| 3926909989 | 22.8% | CN | US | Official Doc |
Product Images
AI Analysis
🎞️ Transparent PVC Rolls (Plastic Sheets/Strips)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 Part 1: Product Definition & Classification: Do You Truly Understand "Transparent PVC Rolls"?
PVC (Polyvinyl Chloride) Rolls, in international trade, are primarily classified under Chapter 39 (Plastics and Articles Thereof). However, the specific HS Code depends heavily on two critical factors:
1. Opacity: Transparent vs. Opaque.
2. Form Factor: Sheet/Film vs. Strip/Other.
⚠️ Key Distinction Point:
- If the product is Transparent PVC Sheet/Film (rolled): It falls under Chapter 39, Heading 39.21 (Other plates, sheets, film, foil and strip, of plastics).
- If the product is deemed a finished Plastic Article (e.g., pre-cut rolls for specific non-packaging uses) or if classification rules direct it to "Other": It may fall under Chapter 39, Heading 39.26 (Other articles of plastics).
- Critical Note: The provided data highlights a discrepancy between Opaque and Transparent classifications. While the reference data provided3921.12.xfor Opaque PVC, Transparent PVC is typically classified under 3920.51.00 or 3921.51.00. However, based strictly on the provided<DATA>which lists Opaque summaries but asks for Transparent, we must analyze the logical mapping provided in the data while correcting for the material state where possible, or strictly adhere to the provided HS Codes if they are mandated for this specific dataset scenario.Correction based on strict adherence to
<DATA>: The<DATA>explicitly provides three HS Codes with summaries describing "PVC Opaque Rolls". However, the user input is "PVC Transparent Roll".
Crucial Observation: The provided data only contains entries for Opaque PVC.
Action: I will explain the classification based on the provided HS Codes but highlight the material discrepancy. In real-world customs,3921.12is for Opaque PVC. Transparent PVC should technically be3920.51or3921.51.
However, to follow the instruction "Do not exceed content", I will map the provided HS Codes to the product, but I must clarify that the data's summaries refer to Opaque goods. If the user's goods are truly Transparent, using3921.12(Opaque-specific) is a high-risk classification error.Alternative Interpretation: Perhaps the user wants to know why these specific HS codes (which describe opaque goods) might be referenced or if there's a typo.
Decision: I will present the HS Codes from<DATA>, explain the logic as described in the data (noting the "Opaque" description in the summary), and provide a strong warning that for Transparent PVC, these codes may be incorrect, suggesting the correct technical code while analyzing the provided data's tax implications.Wait, the prompt says: "Explain why it is classified into the hscode in ... do not exceed ".
Problem: The data describes "Opaque" (不透明). The input is "Transparent" (透明).
Solution: I will state that the provided data applies to PVC Rolls, but the specific subheadings3921.12refer to Opaque PVC. For Transparent PVC, the correct code is likely different, but I will analyze the tax impact of the provided codes as requested, while flagging the material mismatch.Refined Strategy:
1. Acknowledge the input is Transparent.
2. Note that<DATA>summaries describe Opaque.
3. Explain that3921.12is technically for Opaque PVC.
4. Explain3926.90as a potential "兜底" (catch-all) if it doesn't fit 39.21/39.20 properly (e.g., if it's a specific article).
5. Provide the tax analysis for the provided codes.
6. Give clearance advice: Check transparency. If truly transparent,3921.12is wrong.
📦 Part 2: HS Code Classification Details (Based on Provided Data)
| HS Code | Product Description (From Data) | Applicable Scenario | Material/Form Check |
|---|---|---|---|
3921.12.50.00 |
PVC Opaque Roll, PVC material, roll form, sheet/film/strips | General PVC rolls (Opaque) | ❌ Mismatch: Data says "Opaque". Input is "Transparent". |
3921.12.19.50 |
PVC Opaque Roll, PVC material, roll form, strips/films | Specific strip/film category | ❌ Mismatch: Data says "Opaque". Input is "Transparent". |
3926.90.99.89 |
PVC Roll, Plastic material, roll form, plastic articles | Catch-all for plastic articles | ⚠️ Alternative: May apply if not classified as sheet/film. |
🔍 Critical Clarification:
- The HS Codes3921.12.xin the provided data are explicitly described as "PVC Opaque Rolls" (PVC不透明卷).
- For Transparent PVC Rolls, the standard global classification is usually 3920.51.00 (Plates, sheets, film, etc., of PVC) or 3921.51.00.
- Risk: Using3921.12for Transparent PVC may be challenged by customs as misclassification, leading to penalties or delays.
- However, if your product is Opaque, these codes are valid. If it is Transparent, you should verify if it fits 3921.51 or 3920.51.
- The code3926.90.99.89is a "catch-all" (兜底) for plastic articles that do not fit other specific headings. It may be used if the product is not considered a standard "sheet" or "film" but a finished article.
💰 Part 3: 2026 Latest Tariff Rate Details (Including Surcharges, Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: From 2025-11-10 (including subsequent imports)
🎯 1. 3921.12.50.00 —— PVC Opaque Roll (Note: Mismatch for Transparent Input)
| Item | Content |
|---|---|
| Base Tariff | 6.5% (ad valorem) |
| USITC Surcharge | +25% (Section 301) |
| Section 122 Tariff | +10% (Note: Data specifies "122条款关税10%", likely referring to specific trade act surcharges or a typo for Section 122 of the USMCA or similar, but we follow the data) |
| Total Rate | 41.5% |
| Tax Calculation | CIF Value × 41.5% |
| De Minimis Exemption | ❌ Not Available (deny_de_minimis) |
| Legal Basis Path | USITC:3921.12.50.00 → Section 301: +25% → Section 122/Other: +10% |
📌 Explanation:
- The 41.5% rate is extremely high.
- 6.5% is the base MFN rate.
- 25% is the standard Section 301 tariff on Chinese plastics.
- 10% is an additional surcharge (specified as "122条款" in data).
- Warning: If your product is Transparent, using this code is risky.
🎯 2. 3921.12.19.50 —— PVC Opaque Roll (Strip/Film Specific)
| Item | Content |
|---|---|
| Base Tariff | 5.3% (ad valorem) |
| USITC Surcharge | +25% (Section 301) |
| Section 122 Tariff | +10% |
| Total Rate | 40.3% |
| Tax Calculation | CIF Value × 40.3% |
| De Minimis Exemption | ❌ Not Available |
| Legal Basis Path | USITC:3921.12.19.50 → Section 301: +25% → Section 122/Other: +10% |
📌 Explanation:
- Slightly lower base rate (5.3% vs 6.5%) due to specific subheading classification.
- Same high surcharges apply.
- Total 40.3% remains prohibitive for cost-sensitive shipments.
🎯 3. 3926.90.99.89 —— Other Plastic Articles (Catch-All)
| Item | Content |
|---|---|
| Base Tariff | 5.3% (ad valorem) |
| USITC Surcharge | +7.5% (Note: Data specifies "加征关税: 7.5%", which is unusually low for Section 301 plastics which are typically 25%. This might be a specific exempted category or a different surcharge type) |
| Section 122 Tariff | +10% |
| Total Rate | 22.8% |
| Tax Calculation | CIF Value × 22.8% |
| De Minimis Exemption | ❌ Not Available (based on pattern) |
| Legal Basis Path | USITC:3926.90.99.89 → Surcharge: +7.5% → Section 122: +10% |
📌 Explanation:
- This code offers the lowest total tariff (22.8%) among the three.
- However, it is a "catch-all" for Plastic Articles.
- Risk: Customs may reject this if your product is clearly a "Sheet" or "Film" (which belong in 39.20/39.21). Misclassification here could lead to audits.
- Benefit: If your product is a specialized PVC roll not fitting standard sheet/film definitions, this might be a strategic (but risky) choice.
🛠️ Part 4: Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
✅ 1. Document Checklist (Non-negotiable)
| Document | Must Provide | Notes |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must clearly state Transparency (Transparent vs. Opaque), Thickness, Width, Material Composition (100% PVC). |
| ✅ Product Photos | ✔️ | High-res photos showing light transmission (for transparency proof). |
| ✅ Commercial Invoice | ✔️ | Describe as "PVC Transparent Rolls" or "PVC Opaque Rolls" exactly matching the HS Code description. |
| ✅ Packing List | ✔️ | Include roll dimensions and weight. |
| ✅ Origin Certificate | ✔️ | Confirm Chinese origin to trigger correct surcharges. |
✅ 2. Declaration Tips (Key Mantra)
🔥 "Transparency Matters, Code Must Match, Opaque/Transparent Differentiate!"
| Scenario | Correct Declaration | Error to Avoid |
|---|---|---|
| True Transparent PVC Roll | Should be 3920.51 or 3921.51 (Not in provided data). | Using 3921.12 (Opaque) → Misclassification Penalty. |
| True Opaque PVC Roll | 3921.12.50.00 or 3921.12.19.50. |
Declaring as 3926.90 (Catch-all) → Overpayment (22.8% vs 40.3%? No, 22.8% is lower, but riskier). |
| Non-Standard Plastic Roll | 3926.90.99.89 (if not sheet/film). |
Declaring as sheet if it's a finished article → Audits. |
✅ 3. Special Case Handling
| Situation | Advice |
|---|---|
| Input: Transparent PVC | CRITICAL: The provided data is for Opaque PVC. You must verify the correct HS Code for Transparent PVC (likely 3920.51.00). Using 3921.12 is technically incorrect for transparent goods. |
| High Tariff Avoidance | If classified under 3926.90, tariff is 22.8% (lower). But ensure the product qualifies as "Other Article" and not "Sheet". |
| Section 122 Impact | All codes incur a 10% surcharge. Factor this into pricing. |
🌍 Part 5: Global Market Comparison (2026)
| Country/Region | Recommended HS Code (For PVC Rolls) | Base Tariff | Surcharge | Total Est. | Notes |
|---|---|---|---|---|---|
| 🇺🇸 USA | 3921.12.x (Opaque) or 3920.51 (Transparent) |
5.3%-6.5% | +25% (301) +10% (122) | 40.3%-41.5% | High cost. Verify transparency. |
| 🇺🇸 USA | 3926.90.99.89 (Catch-all) |
5.3% | +7.5% +10% | 22.8% | Lower rate, but high classification risk. |
| 🇨🇳 China | 3921.12.x |
6.5% | 0% | 6.5% | No US surcharges. |
| 🇪🇺 EU | 3920.51.00 |
6.5% | 0% | 6.5% | No Section 301. |
📌 Conclusion:
- The US market imposes heavy tariffs on Chinese PVC rolls.
- Transparency is the key classifier. The provided data is for Opaque.
- If your goods are Transparent, do NOT use3921.12without verifying if customs accepts it or if it should be3920.51.
📌 Part 6: Common Errors & Pitfall Guide (Blood-Tears Lesson)
❌ Error 1: Using 3921.12 for Transparent PVC
👉 Consequence: Customs may deem it "Material Mismatch". Opaque codes cannot be used for Transparent goods. Result: Delay, fine, or re-classification to a different code with potential penalty.
👉 Fix: Use the correct code for Transparent PVC (e.g., 3920.51.00).
❌ Error 2: Ignoring the 10% "122 Clause" Surcharge
👉 Consequence: Underestimating landed cost by 10%.
👉 Fix: Factor this into your FOB/CIF pricing immediately.
❌ Error 3: Choosing 3926.90 to Save Money (22.8% vs 40%)
👉 Consequence: If the product is clearly a "Sheet" or "Film", customs will reject the "Article" classification.
👉 Fix: Only use 3926.90 if the product is a specialized roll not fitting standard sheet/film definitions.
✅ Correct Action:
"PVC Transparent Rolls, 0.5mm Thick, Width 1.2m, Used for Packaging, Transparent."
Verify HS Code: Check if3920.51.00applies. If not, consult a broker on3921.51.00. Do not blindly use3921.12(Opaque).
🎯 Part 7: Conclusion: Professional Classification, Cost Control!
🎯 Remember:
🔹 "Transparent vs. Opaque is Critical!"
🔹 "3921.12 is for Opaque. Using it for Transparent is Risky!"
🔹 "Total Tax: 41.5% (Opaque 3921.12.50), 40.3% (Opaque 3921.12.19), 22.8% (Catch-all 3926.90)."
🔹 "If Transparent, Seek Correct Code (3920/3921.51) to Avoid Misclassification Penalties."
📌 Tips:
- If you are importing Transparent PVC, please confirm the correct HS Code with your customs broker, as the provided data is explicitly for Opaque PVC.
- The 22.8% rate on
3926.90.99.89is attractive but requires strong justification that the product is not a standard sheet/film.
📣 Immediate Action:
📞 Contact Customs Broker: Ask for Transparent PVC Roll classification.
📸 Provide Photos: Show transparency.
🚀 Avoid Risk: Do not use Opaque codes for Transparent goods.
✨ Professional clearance starts with accurate classification!
💼 Your cost depends on the right code!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.