Patterned Galvanized Coil
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7225910000 | 35.0% | CN | US | Official Doc |
| 7212500000 | 35.0% | CN | US | Official Doc |
| 7225920000 | 35.0% | CN | US | Official Doc |
| 7210410000 | 10.0% | CN | US | Official Doc |
| 7212305000 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
ποΈ Patterned Galvanized Coil (Galvanized Steel Strip/Coil)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: Do You Really Understand "Patterned Galvanized Coil"?
Patterned Galvanized Coil is a cold-rolled steel strip with a zinc coating (galvanization), further processed with a decorative or functional pattern (often called "spangle," "crystal," or "embossed") on its surface. In international trade, the classification hinges on two critical factors: 1. Base Material: Is it Carbon Steel (Iron/Non-alloy steel) or Alloy Steel? 2. Form: Is it a flat-rolled product (strip/coil)?
β οΈ Key Distinction Point:
- If the base material is Carbon Steel (Iron/Non-alloy steel) β Look at Chapter 72.10 (Flat-rolled, width > 600mm) or 72.12 (Flat-rolled, width < 600mm, or other forms).
- If the base material is Alloy Steel β Look at Chapter 72.25.
- The "Patterned" (spangle) aspect is considered a surface finish/coating type and does not change the core material classification but affects the specific sub-heading under "Other" coatings.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the matched HS Codes for "Patterned Galvanized Coil":
| HS Code | Product Description | Matching Basis | Total Tax Rate (US Import from China) |
|---|---|---|---|
7210.41.00.00 |
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, plated or coated with zinc, of a thickness β₯ 0.5 mm | "Matching Success." The term "Galvanized" matches "Plated/Coated with Zinc." The "Coil" form matches "Flat-rolled Product." Based on common sense, this type of product is typically Carbon Steel (Iron/Non-alloy). | 10.0% |
7212.30.50.00 |
Flat-rolled products of iron or non-alloy steel, of a width < 600 mm (or other forms), electro-galvanized or otherwise galvanized | "Matching Basis." The product has a "Galvanized" material feature. The "Coil" is a flat-rolled form. Although width isn't specified, it is inferred to fit the galvanizing category for non-alloy steel. | 35.0% |
7212.50.00.00 |
Flat-rolled products of iron or non-alloy steel, of a width < 600 mm (or other forms), coated or plated with zinc or tin | "Matching Basis." The "Coil" shape fits flat-rolled products. The material "Zinc" fits the coating characteristic. "Patterned" (Spangle) is viewed as a decorative form of coating, logically consistent with "Other coated or plated." | 35.0% |
7225.91.00.00 |
Other alloys of silicon-electric steel; Other alloy steel flat-rolled products, width β₯ 600 mm, electro-galvanized or otherwise galvanized | "Matching Basis." The product "Patterned Galvanized Coil" fits the "Coating" feature. Inferring from common sense, if the base is Alloy Steel, it fits "Other Alloy Steel Flat-Rolled Products (Electro-galvanized or Coated)." | 35.0% |
7225.92.00.00 |
Other alloy steel flat-rolled products, width β₯ 600 mm, plated or coated with zinc | "Matching Basis." The "Coil" fits "Flat-Rolled Product." "Galvanized" fits "Plated or Coated with Zinc." Inferring from common sense, if the product belongs to the Alloy Steel category, it matches "Other Alloy Steel" without material conflict. | 35.0% |
π Key Reminder:
-7210.41.00.00is the lowest tax rate (10%) but requires the product to be Iron/Non-Alloy Steel AND Width β₯ 600mm.
-7212.xxxxand7225.xxxxcodes carry a 35% tax rate. This is due to higher additional tariffs or different material classifications (Alloy Steel or narrower width).
- "Patterned" (Spangle) is treated as a surface finish, not a separate material class. The base steel type (Carbon vs. Alloy) is the primary driver for choosing between Chapter 72.10/12 and 72.25.
π° III. 2026 Latest Tariff Rate Details (Including Additional Taxes, Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: November 10, 2025 (and subsequent imports)
π― 1. 7210.41.00.00 ββ Flat-Rolled Steel, Galvanized, Carbon Steel, Width β₯ 600mm
| Item | Content |
|---|---|
| Base Tariff | 0.0% (ad valorem) |
| Section 301 Tariff (25%) | +25.0% (From USITC Footnote 9903.88.01) |
| Section 122 Tariff (IEEPA 10%) | +10.0% (ιε―ΉδΈε½δΊ§εοΌθͺ2025εΉ΄11ζ10ζ₯θ΅·) |
| Total Tax Rate | 35.0%? Wait, Data Says 10.0%? |
| Tax Detail from Data | 10.0% (Base 0% + Section 122 10% + Section 301 0%?) |
| Explanation from Data | tax_detail: "εΊη‘ε
³η¨: 0.0%, ε εΎε
³η¨: 0.0%, 122ζ‘ζ¬Ύε
³η¨10%" |
π Critical Note on
7210.41.00.00:
- According to the provided data, the total tax for this code is 10.0%.
- The tax breakdown is: Base 0% + Section 301 0% + Section 122 10%.
- β οΈ Contradiction Alert: Typically, steel products are subject to Section 301 (25%). However, the provided data explicitly states "Add-on Tariff: 0.0%" for this code. This may imply a specific exemption or a data anomaly. Please verify with Customs Broker if Section 301 applies. If the data is accurate, this is a low-tax entry point.
π― 2. 7212.30.50.00, 7212.50.00.00, 7225.91.00.00, 7225.92.00.00 ββ Other Codes
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Tariff (25%) | +25.0% |
| Section 122 Tariff (IEEPA 10%) | +10.0% |
| Total Tax Rate | 35.0% |
| Tax Detail from Data | tax_detail: "εΊη‘ε
³η¨: 0.0%, ε εΎε
³η¨: 25.0%, 122ζ‘ζ¬Ύε
³η¨10%" |
π Explanation:
- USITC Additional Tariff 25%: From the "Section 301 Tariff" under the US Trade Act.
- IEEPA Additional Tariff 10%: From the "International Emergency Economic Powers Act" for Chinese products.
- Combined 35%: This is a high tariff. These codes apply to either Alloy Steel or Non-Alloy Steel with Width < 600mm (or other forms not covered by 72.10).
- De Minimis Exemption: β Not Eligible (deny_de_minimis) for Section 301 and 122 tariffs.
π οΈ IV. Customs Clearance Practical Advice (Avoid Pitfalls)
β 1. Preparation Material Checklist (Essential)
| Material | Must Provide | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must specify: Base Steel Type (Carbon/Alloy), Zinc Coating Weight (GSM), Coil Width, Thickness, and "Patterned/Spangle" description. |
| β Product Photos (Clear) | βοΈ | Show the "Patterned" surface texture and the coil end. |
| β Commercial Invoice | βοΈ | Clearly state "Patterned Galvanized Steel Coil" and HS Code. |
| β Origin Certificate (CO) | βοΈ | If not Chinese, can apply for preferential rates. |
| β Packing List | βοΈ | Detail coil weight, dimensions, and packaging. |
β 2. Declaration Tips (Key Mantra)
π₯ "Material First, Width Second, Pattern is Finish, Tax Depends on Code!"
| Situation | Correct Declaration | Wrong Practice |
|---|---|---|
| Carbon Steel, Width β₯ 600mm | 7210.41.00.00 |
Misdeclaring as Alloy Steel β 35% |
| Carbon Steel, Width < 600mm | 7212.xxxx (35%) |
Trying to force 72.10 β Rejection |
| Alloy Steel | 7225.91/92 (35%) |
Misdeclaring as Carbon Steel β Penalty |
| "Patterned" Surface | Describe as "Spangle" or "Embossed" | Ignore surface finish β Ambiguity |
β 3. Special Cases Handling
| Situation | Handling Advice |
|---|---|
| Alloy Steel Claim | Provide material test report (e.g., ASTM A1008 vs. A653). Alloy steel incurs higher tariffs (35%). |
| Width Dispute | If width is borderline (e.g., 599mm vs. 600mm), declare accurately. 600mm threshold is strict for 72.10. |
| Section 301 Exemption | Check if the product is excluded from Section 301 (unlikely for steel, but verify latest USTR lists). |
| Section 122 Tariff | This is a new 10% tariff. It applies to most Chinese steel imports. Factor this into cost. |
π V. Global Market Customs Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 7210.41.00.00 (if Carbon Steel β₯600mm) |
10% (Per Data) | No specific | Highest Risk Market due to 301/122 tariffs. |
| π¨π³ China | 7210.41.00.00 |
5% (Import) | N/A | Domestic steel tax incentives may apply. |
| πͺπΊ EU | 7210.41.00.00 |
0% (If No Anti-Dumping) | CE (if structural) | Check for Anti-Dumping Duties (ADD) on Chinese steel. |
| π¬π§ UK | 7210.41.00.00 |
0% | UKCA | Similar to EU. |
| π¦πΊ Australia | 7210.41.00.00 |
5% | RCM | No major anti-dumping on this specific code? Verify. |
π Conclusion:
- The USA is the most critical market for tax planning.
- If you can prove Carbon Steel and Width β₯ 600mm, you may qualify for 10% (as per data), saving 25% vs. 35%.
- European Union may apply Anti-Dumping Duties separately, so check ADD rates.
π VI. Common Errors & Pitfalls (Blood & Tears Lessons)
β Error 1: Misidentifying Alloy Steel as Carbon Steel
π Consequence: If customs test reveals Alloy Steel, you downgrade to 7225 β Tax jumps from 10% to 35%. Back taxes + fines!
β Error 2: Ignoring Width in Declaration
π Consequence: Declaring 599mm as 600mm β Customs rejects 7210, moves to 7212 β Tax jumps to 35%.
β Error 3: Not Declaring "Patterned/Spangle"
π Consequence: Ambiguity in description β Customs may request additional testing or delay clearance β Storage fees + delays.
β Correct Practice:
"Patterned Galvanized Steel Coil, Carbon Steel (ASTM A653), Width 610mm, Thickness 0.5mm, Zinc Coating 150gsm, Spangle Finish, Model XYZ"
π― VII. Conclusion: Professional Declaration, Save Time, Save Money!
π― Remember the Mantra:
πΉ "Carbon Steel β₯ 600mm β 10% (Check Data Accuracy)
πΉ "Alloy or < 600mm β 35% (Standard High Tax)"
πΉ "Pattern is Finish, Material is King!"
π Tips:
- If your steel is Carbon Steel and Width β₯ 600mm, fight for 7210.41.00.00.
- If Alloy Steel, accept 7225 (35%).
- Section 122 (10%) is mandatory for Chinese steel in the US.
- Section 301 (25%) appears in the data for most codes but is 0% for 7210.41.00.00 in the provided data. VERIFY THIS WITH A CUSTOMS BROKER as it contradicts general steel tariffs.
π£ Immediate Action:
π Contact a Professional Customs Broker + Provide Material Test Report + Apply for Advance Ruling if possible.
π Let your galvanized coil Clear Smoothly, Profit Maximized!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Every Cent of Cost, Deserves to be Calculated Precisely!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.