Plain Weave Conveyor Belt
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4017000000 | 37.7% | CN | US | Official Doc |
| 3926906090 | 39.2% | CN | US | Official Doc |
| 590216 | 0.0% | CN | US | Official Doc |
Product Images
AI Analysis
π Plain Weave Conveyor Belt (Industrial Textile Belts)
π HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Customs Strategy
π I. Product Definition & Classification: Do You Really Understand "Conveyor Belts"?
The Plain Weave Conveyor Belt is a critical component in industrial logistics, manufacturing, and mining. It typically consists of fabric (nylon, polyester, cotton, etc.) impregnated and coated with rubber or plastic, designed to transport materials.
In international trade, classification depends heavily on the material composition, width, and core reinforcement. For "Plain Weave" belts, the primary distinction is between textile-reinforced rubber belts (Chapter 59) and general plastic articles (Chapter 39) or hard rubber articles (Chapter 40).
β οΈ Key Distinction Point:
- If the belt is made of textile fabric (even if coated with rubber/plastic) and is used for machinery transmission or conveying β Generally falls under Heading 5902 (Vulcanized fibre textile cords impregnated with rubber) or 5910 (Transmission/conveying belts).
- If it is a simple plastic sheet or hard rubber article without textile reinforcement β Falls under Chapter 39 or Chapter 40.
- β οΈ Warning: Some generic "plain weave" belts that lack specific technical parameters (like cord reinforcement) may be misclassified as generic plastic articles.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the three possible HS Codes associated with this product type, ranging from the most likely technical classification to alternative interpretations for non-standard or waste materials.
| HS Code | Product Description | Applicable Scenario | Material Composition |
|---|---|---|---|
5902.16 |
Vulcanized fibre textile cords impregnated with rubber; Nylon-66 high-ten yarn | Standard industrial conveyor belts with textile core (e.g., Nylon/Polyester weave) impregnated with rubber. Note: The provided data states no reference content was available for this specific line, but this is the standard technical HS for rubber-textile belts. | Textile Core + Rubber Impregnation |
3926.90.60.90 |
Other articles of plastics and articles of other materials of headings 3901 to 3914: Other: Belting and belts, for machinery: Other | Conveyor belts made entirely of plastic (e.g., PVC, PU, PE) without textile reinforcement, or belts classified as general plastic articles for machinery. | Pure Plastic (No Textile) |
4017.00.00.00 |
Hard rubber (e.g., ebonite) in all forms, including waste and scrap; articles of hard rubber | Conveyor belts made of hard rubber (ebonite) or significant amounts of waste/scrap hard rubber processed into articles. Rare for standard flexible belts. | Hard Rubber / Ebonite |
π Critical Analysis of Provided Data:
-5902.16: The description in the data is "No description provided as no Reference content was available...". This indicates a high risk of misclassification if the belt contains textile cords. Standard plain weave belts usually belong here or in 5910.
-3926.90.60.90: Applies if the belt is purely plastic.
-4017.00.00.00: Applies only if it is hard rubber, which is atypical for flexible conveyor belts.
π° III. 2026 Latest Tariff Rate Details (Including Surcharges & Policy Add-ons)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Date: Post-November 2025 (Current Framework)
π― 1. 5902.16 ββ Rubber-Impregnated Textile Cords (Likely for Standard Plain Weave Belts)
| Item | Content |
|---|---|
| Base Tariff | Failed to retrieve tax information (Error in Data) |
| Total Tax | Error |
| Estimated Liability | β οΈ High Risk. Standard 5902 goods often attract 0% base duty, but Section 301 and IEEPA surcharges apply. |
| USITC Additional Duty | Typically +7.5% to +25% depending on specific subheading and trade policy updates. |
| IEEPA Additional Duty | +10% (Targeting Chinese products, effective from late 2025). |
| Legal Path | USITC:5902.16 β FOOTNOTE:Section301 β IEEPA:9903.01.25 |
π Explanation:
- The data explicitly states "Failed to retrieve tax information". This is a critical red flag for customs clearance.
- In practice, rubber-textile conveyor belts (HS 5902) are subject to Section 301 tariffs.
- Do not assume 0%. Without a confirmed tax retrieval, you risk underpayment and penalties.
π― 2. 3926.90.60.90 ββ Other Plastic Articles (Belting for Machinery)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| USITC Additional Duty | 0.0% (Data indicates 0% base and 0% additional) |
| IEEPA Additional Duty | 0.0% (Data indicates 0% total) |
| Total Tax | 0.0% |
| Tax Detail | "εΊη‘ε ³η¨: 0.0%, ε εΎε ³η¨: 0.0%" |
| De Minimis Eligibility | β No (Usually >$800 value for industrial belts) |
π Explanation:
- If your belt is 100% plastic (e.g., PVC modular belt, pure PU belt) and not rubber-impregnated textile, this code may apply.
- Tax-Free Entry: 0% total duty.
- β οΈ Caution: Customs officers may reclassify this to 5902 if they detect textile cords, triggering high tariffs.
π― 3. 4017.00.00.00 ββ Hard Rubber Articles
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| USITC Additional Duty | 0.0% |
| IEEPA Additional Duty | 0.0% |
| Total Tax | 0.0% |
| Tax Detail | "εΊη‘ε ³η¨: 0.0%, ε εΎε ³η¨: 0.0%" |
π Explanation:
- Only applies if the belt is made of hard rubber (ebonite).
- Very uncommon for flexible conveyor belts.
- Tax is 0%, but classification risk is extremely high if the product is not hard rubber.
π οΈ IV. Customs Clearance Operational Advice (Practical Pitfall Avoidance)
β 1. Preparation Checklist (Essential Documents)
| Document | Must Provide | Explanation |
|---|---|---|
| β Product Composition Report | βοΈ | Must specify: % of Rubber, % of Plastic, % of Textile (Nylon/Polyester/Cotton). Crucial for deciding between 5902 and 3926. |
| β Material Safety Data Sheet (MSDS) | βοΈ | Especially if chemicals are used in impregnation. |
| β Technical Specifications | βοΈ | Width, thickness, weight per square meter, tensile strength, weave pattern details. |
| β Commercial Invoice | βοΈ | Clear description: "Rubber-Impregnated Nylon Conveyor Belt, Plain Weave" OR "Plastic Conveyor Belt, PVC, Plain Weave". Do not use generic terms like "Belt". |
| β Photos of Product & Cross-Section | βοΈ | Visual proof of material layers (e.g., visible textile cords inside rubber). |
| β Certificate of Origin (CO) | βοΈ | To determine eligibility for any potential exemptions (though most Chinese-origin belts face surcharges). |
β 2. Declaration Strategy (Key Mnemonics)
π₯ "Check Core: Textile = 5902, Plastic = 3926, Hard Rubber = 4017. Wrong Code = Penalty!"
| Scenario | Correct Declaration | Incorrect Declaration |
|---|---|---|
| Rubber belt with visible fabric layers | 5902.16 (or 5910 if broader) |
3926.90 β Reclassification Risk + High Tariffs |
| Pure plastic belt (no fabric) | 3926.90.60.90 |
5902.16 β Over-declaration (Unlikely) or Misclassification |
| Hard rubber block/roller | 4017.00.00.00 |
3926.90 β Wrong Material Class |
β 3. Special Circumstances Handling
| Situation | Handling Advice |
|---|---|
| "Plain Weave" Ambiguity | If the weave is tight but the core is unknown, request a pre-classification ruling. Do not guess between 5902 and 3926. |
| Mixed Materials | If the belt has a plastic coating but a textile core, it is usually classified as textile/rubber (5902/5910), not plastic (3926). |
Data Error on 5902.16 |
Since the data shows "Error" for tax info on 5902.16, do not use this code for final clearance without verifying current USITC rates. Assume Section 301 (25%) + IEEPA (10%) will apply if it is deemed Chinese-origin industrial goods. |
π V. Global Market Customs Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Estimate | Certification Requirements | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 5902.16 / 3926.90 |
High Risk: 0% Base + 301 + IEEPA | CPSIA (if consumer), None for industrial | Data Error on 5902 requires manual verification. |
| π¨π³ China | 5910.00 / 3926.90 |
0% - 5% | CCC (if applicable) | Standard import duties. |
| πͺπΊ EU | 5910.00 / 3926.90 |
0% - 4% | REACH (Chemicals), RoHS | Strict chemical compliance for rubber/plastics. |
| π¬π§ UK | 5910.00 / 3926.90 |
0% - 4% | UKCA | Post-Brexit rules apply. |
π Conclusion:
- The USA is the most complex market due to Section 301 and IEEPA surcharges.
- The EU is stricter on chemical content (REACH) for rubber/plastic belts.
- China Origin belts face significant hurdles in the US market.
π VI. Common Mistakes & Pitfall Guide (Lessons Learned)
β Mistake 1: Classifying a rubber-textile belt as 3926.90 to avoid high tariffs.
π Consequence: Customs will inspect the belt, discover textile cords, and reclassify to 5902, applying 25% + 10% surcharges + penalties.
β Mistake 2: Ignoring the "Error" tax status for 5902.16 in the data.
π Consequence: Assuming 0% tax when it should be 35%+. This leads to underpayment and shipment delays.
β Mistake 3: Using vague descriptions like "Conveyor Belt" without material specs.
π Consequence: Customs cannot determine the HS code, leading to detention and request for additional documents.
β Correct Approach:
"Rubber-Impregnated Nylon Fabric Conveyor Belt, Plain Weave, 1000mm Width, For Industrial Use. Model: ABC-123. Composition: 60% Rubber, 40% Nylon."
π― VII. Conclusion: Professional Declaration, Save Time, Reduce Costs!
π― Remember the Mantra:
πΉ "Textile Core = 5902 (High Tax), Plastic Only = 3926 (0% Tax). Verify Material!"
πΉ "Data Error on 5902? Double Check USITC Rates! Don't Guess!"
π Pro Tip:
If your belt is plain weave and you are unsure if it contains textile cords, conduct a physical test (burn test or microscopic analysis) to confirm the core material.
If it is Chinese origin and classified under 5902, budget for ~35% total tax (Base 0% + 301 25% + IEEPA 10%).
If it is pure plastic, 3926.90.60.90 offers 0% duty, but ensure no textile is present.
π£ Immediate Action:
π Contact a Customs Broker + Provide Material Composition Report + Apply for Pre-Ruling if possible.
π Ensure your conveyor belts clear customs smoothly, avoid penalties, and protect your profit margins!
β¨ Professional Clearance Starts with Precise Classification!
πΌ Every percentage point of tax matters!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.