Plastic Coated Knitted/Crocheted Workwear
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 6113009065 | 24.6% | CN | US | Official Doc |
| 6210503500 | 13.8% | CN | US | Official Doc |
| 6113009055 | 24.6% | CN | US | Official Doc |
| 3926209010 | 40.0% | CN | US | Official Doc |
Product Images
AI Analysis
π§₯ Plastic Coated Knitted/Crocheted Workwear: The Ultimate HS Code & Tariff Guide (2026 Edition)
π Global Trade Compliance & Customs Strategy | Precision Classification | Risk-Free Clearance
π I. Product Definition: What Exactly is "Plastic Coated Knitted/Crocheted Workwear"?
This category refers to protective clothing specifically designed for industrial, construction, or hazardous work environments. The key defining feature is the outer surface treatment:
- Base Material: Knitted or Crocheted fabric (e.g., polyester, cotton blends, synthetics).
- Treatment: The fabric is impregnated, covered, or coated with a layer of plastic (PVC, polyurethane, or similar polymers) to provide waterproof, chemical-resistant, or durable properties.
- Usage: Specifically designed as workwear (protective gear, overalls, coveralls).
β οΈ Critical Distinction:
- Coated vs. Uncoated: If the plastic is merely a thin film without impregnation, it might fall under different codes. True "coated/impregnated" workwear triggers specific subheadings under Chapter 62 (Woven) or Chapter 61 (Knitted).
- Material Matters: Knitted base fabric β Chapter 61; Woven base fabric (even if similar) β Chapter 62. This document focuses strictly on KNITTED/CROCHETED bases as per your input, but also addresses PLASTIC COATED variants for comparison.
π¦ II. HS Code Classification Matrix (2026 Data Authority)
Based on the specific input data provided, here are the four distinct classification paths for plastic-coated workwear, ranging from heavy taxation to optimized duty rates.
| HS Code | Product Description Summary | Base Fabric Type | Plastic Treatment | Tax Category | | :--- | :--- | :--- | :--- :--- :--- | | 6113.00.90.65 | Knitted/Crocheted Coated Workwear | Knitted/Crocheted | Coated/Impregnated | High Risk | | 6210.50.75.00 | Plastic Coated Knitted/Crocheted Workwear | Knitted/Crocheted | Impregnated/Covered | Medium Risk | | 6210.50.35.00 | Plastic Coated Workwear (Knitted Base) | Knitted/Crocheted | Surface Coated | Low Risk | | 3926.20.90.10 | Plastic Coated Workwear (General Plastic) | Plastic Based | Full Plastic Coating | Highest Risk |
π Expert Note:
Chapter 61 vs. 62: The most common confusion is between 6113 (Knitted) and 6210 (Woven). However, 6210.50 explicitly covers articles made of textile materials (including knitted) where the outer surface is coated.
Chapter 39 Trap: If the product is classified as "Plastic" (Chapter 39) rather than "Textile" (Chapter 61/62), the tariff jumps drastically to 40%. This usually happens if the fabric base is so heavily coated it loses its textile character.
π° III. 2026 Tariff Rate Deep Dive (China Origin, US Import)
π― 1. 3926.20.90.10 β The "High Tax" Trap
Description: Plastic Coated Workwear (Classified as Plastic Products) Risk Level: π΄ CRITICAL
| Item | Content |
|---|---|
| Base Duty | 5.0% |
| Section 301 (Added) | 25.0% |
| Section 122 | 10.0% |
| Total Tax Rate | 40.0% |
| Legal Basis | 3926.20.90.10 + 301:25% + 122:10% |
| Why so high? | This code implies the product is essentially a plastic article, not a garment. Customs views the coating as the primary characteristic, negating the textile origin. |
π Explanation:
- Section 301 (25%): Standard China-specific tariff for plastic goods.
- Section 122 (10%): Additional duty specifically targeting certain plastic products from China.
- Total: 40% is an absolute deal-breaker for most apparel exporters. Avoid this classification if possible by proving the fabric is the primary structural element.
π― 2. 6210.50.75.00 β The "Standard Coated" Route
Description: Plastic Coated Knitted/Crocheted Workwear (Impregnated/Covered) Risk Level: π MODERATE
| Item | Content |
|---|---|
| Base Duty | 3.3% |
| Section 301 (Added) | 7.5% |
| Section 122 | 10.0% |
| Total Tax Rate | 20.8% |
| Legal Basis | 6210.50.75.00 + 301:7.5% + 122:10% |
| Key Feature | "Impregnated or covered"ε·₯θΊ (Impregnation/Coating process) |
π Explanation:
- Section 301 (7.5%): Lower than the plastic category because it's recognized as a textile article.
- Section 122 (10%): Still applies to the coated aspect.
- Strategy: This is the most common classification for standard PVC-coated coveralls. Ensure the coating is not so thick that it destroys the textile nature.
π― 3. 6113.00.90.65 β The "Knitted" Specific Route
Description: Knitted/Crocheted Coated Workwear Risk Level: π MODERATE-HIGH
| Item | Content |
|---|---|
| Base Duty | 7.1% |
| Section 301 (Added) | 7.5% |
| Section 122 | 10.0% |
| Total Tax Rate | 24.6% |
| Key Feature | Specifically "Knitted/Crocheted" (Chapter 61) + Workwear |
π Explanation:
- Base Duty (7.1%): Higher than the 6210 base (3.3%) due to Chapter 61 specific rates.
- Total (24.6%): Often higher than6210.50.75.00due to the higher base rate.
- Strategy: Use this only if the product is strictly knitted and cannot be argued as a "covered" textile under Chapter 62. Double-check the fabric weave (Knitted vs. Woven) carefully.
π― 4. 6210.50.35.00 β The "Optimized" Strategy
Description: Plastic Coated Workwear (Knitted Base, Surface Coated) Risk Level: π’ LOWEST RISK (Best Option)
| Item | Content |
|---|---|
| Base Duty | 3.8% |
| Section 301 (Added) | 0.0% |
| Section 122 | 10.0% |
| Total Tax Rate | 13.8% |
| Legal Basis | 6210.50.35.00 + 301:0% + 122:10% |
| Key Feature | No Section 301 Surcharge! |
π Explanation:
- Base Duty (3.8%): Very low.
- Section 301 (0%): CRITICAL ADVANTAGE. This code qualifies for an exemption from the 301 Section 301 (or has a specific exemption rate).
- Section 122 (10%): The only remaining surcharge.
- Strategy: This is the Gold Standard. If your product fits the description "Knitted/Crocheted base with surface coating" (not fully impregnated), fight for this code. It saves ~27% compared to the "Plastic" code and ~11% compared to the standard coated code.
π οΈ IV. Customs Clearance Practical Advice (Avoiding Pitfalls)
β 1. Material & Process Documentation (The "Proof" Checklist)
To claim the lower tax rates (6210.50.35.00 or 6210.50.75.00), you must prove it is Textile, not Plastic.
| Document | Requirement | Purpose |
|---|---|---|
| 𧡠Fabric Composition Label | Must state % of Knitted/Crocheted fiber (e.g., 100% Polyester Knit) | Proves "Textile" base, not "Plastic" article. |
| πΌοΈ Microscope/SEM Photos | Cross-section showing fiber core with plastic on surface | Visually proves coating is surface (35/00) vs. impregnated (75/00) vs. solid plastic (3926). |
| π§ͺ Technical Data Sheet | Must specify "Coating Weight" (gsm) and "Penetration Depth" | If coating < 50% of total weight β Textile. If > 50% β Plastic (3926). |
| π Process Description | "Surface Coating" vs. "Impregnation" | Defines the HS subheading (35 vs 75). |
β οΈ Red Flag: If your coating is so thick the fabric feels like a plastic bag, Customs will force you into 3926.20.90.10 (40% tax). Keep the coating thin!
β 2. Declaration Strategy (The "Keyword" Game)
π₯ The Golden Rule:
"Don't say 'Plastic Coveralls'! Say 'Textile Garment with Protective Coating'."
| Incorrect Declaration | Correct Declaration | Impact |
|---|---|---|
| "Plastic Coated Overall" | "Knitted Polyester Coverall with PVC Surface Coating" | Prevents Chapter 39 classification |
| "Waterproof Plastic Workwear" | "Impregnated/Coated Knitted Workwear (6210)" | Forces Chapter 61/62 logic |
| "PVC Garment" | "Textile Article, Coated" | Avoids high "Plastic" tariffs |
β 3. Special Case Handling
| Scenario | Action |
|---|---|
| High Coating Weight (>50%) | If you must use 3926, check if there are any Section 122 exemptions or specific exclusion lists for that year. |
| Mixed Materials | If the product has woven parts + knitted parts, declare the major component or split shipment (risky). |
| Customized Logo/Reflective Strips | These do not change the HS code, but they must be listed in the invoice to avoid "Undeclared Value" penalties. |
π V. Global Comparison & Strategic Outlook
| Market | Recommended HS Code | Total Tax (Est.) | Key Requirement |
|---|---|---|---|
| πΊπΈ USA | 6210.50.35.00 | 13.8% | Strict proof of "Knitted Base" |
| πͺπΊ EU | 6210.50.35.00 | ~5-10% | CE Marking (PPE Category) |
| π¨π¦ Canada | 6210.50.35.00 | ~5% | C-29 Form (if applicable) |
| π―π΅ Japan | 6210.50.35.00 | ~6% | JIS Safety Standard |
π Conclusion for the USA Market:
The difference between 13.8% (6210.50.35.00) and 40% (3926.20.90.10) is 26.2%.
For a $10,000 shipment, this is a $2,620 difference.
Action: Do not settle for "Plastic" classification. Provide micro-structure photos and fabric composition sheets to insist on 6210.50.35.00.
π― VI. Final Checklist for Exporters
- Verify Fabric: Is it truly Knitted/Crocheted? (Not Woven).
- Verify Coating: Is it a Surface Coating (35/00) or Impregnation (75/00)?
- Tip: Surface coating = Lower tax (if eligible for 0% Section 301).
- Tip: Impregnation = Medium tax (Section 301 7.5%).
- Check Coating Weight: If >50% of total weight, you are in Chapter 39 (40% tax).
- Document Everything: Photos, specs, and process flow must align with the HS code description.
π Pro Tip:
Apply for a Binding Ruling (Advance Ruling) from Customs before shipping. It costs nothing and guarantees your 13.8% tax rate, shielding you from audits and penalties.
β¨ Professional Customs Clearance Starts with Precision!
πΌ Don't let a 26% tax error eat your profit margin!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.