Plastic Conveyor Hose
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3917320020 | 38.1% | CN | US | Official Doc |
| 3917320010 | 38.1% | CN | US | Official Doc |
| 3917310000 | 38.1% | CN | US | Official Doc |
| 3917330000 | 38.1% | CN | US | Official Doc |
AI Analysis
π’οΈ Plastic Conveyor Hose (Industrial Plastic Hoses)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Logistics Strategy
π One, Product Definition & Classification: Do You Really Understand "Plastic Conveyor Hoses"?
Plastic conveyor hoses are critical components in industrial logistics, agriculture, and material handling systems. They are used to transport bulk materials (grains, powders, plastics pellets) or fluids. In international trade, they fall primarily under Chapter 39 (Plastics and Articles Thereof), specifically Heading 3917 (Tubes, Pipes and Hoses, and Joints Therefor).
The classification depends on the material composition (specifically Polyethylene/PE vs. Other Plastics) and the specific application/sub-category defined by the customs authority.
β οΈ Key Distinction Points: - Material Matters: Is it made of Polyethylene (PE) or other plastics? PE often has its own sub-headings. - Reinforcement: Are they reinforced or non-reinforced? (Note: The provided data assumes standard plastic hoses without complex metal reinforcement that would shift them to Chapter 72/73). - Function: "Conveyor" implies use for bulk solids, but the HS code is generally based on physical characteristics (Tube/Hose) rather than end-use for plastics.
π¦ Two, HS Code Classification Details (2026 Latest Tariff Authorityε―Ήη §)
Based on the provided data, the classification focuses on Plastic Hoses. All listed codes share the same total tax rate due to current trade policies (likely US-China tariffs).
| HS Code | Product Description | Summary from Data | Material Focus | Application Context |
|---|---|---|---|---|
3917.32.00.20 |
Plastic Hoses, Reinforced or Otherwise Combined with Other Materials | Matches form (Hose) and material (Plastic/PE); fits Polyethylene hose classification | Polyethylene (PE) | High-strength conveyance, abrasion-resistant |
3917.32.00.10 |
Plastic Hoses, Reinforced or Otherwise Combined with Other Materials | Matches form (Hose) and material (Plastic); fits Other plastic hose classification | Other Plastics | General purpose, flexible conveyance |
3917.31.00.00 |
Plastic Tubes, Pipes and Hoses, Not Reinforced or Otherwise Combined with Other Materials | Matches form (Hose) and material (Plastic); fits Plastic tubing/hose classification | General Plastic | Basic pneumatic or fluid transfer, low pressure |
3917.33.00.00 |
Other Plastic Tubes, Pipes and Hoses | Matches form (Hose) and material (PE/Polyethylene); fits Plastic hose classification | Polyethylene (PE) | Specialized PE applications, chemical resistance |
π Important Note:
- All four codes relate to Plastic Hoses (3917). - The distinction between.31(unreinforced) and.32/.33(reinforced/other) is crucial for physical inspection. - Polyethylene (PE) specific codes (...20,...33) may require precise material documentation to prove chemical composition.
π° Three, 2026 Latest Tariff Rate Details (Including Surcharges & Policy Add-ons)
β Applicable Country: China (Export) / USA (Import context implied by 122 Section & 301 tariffs)
β Origin: Likely China (Given the specific tariff breakdown)
β Effective Time: 2025-2026 Trade Period
π― Universal Tax Breakdown for All Listed HS Codes
| Item | Content |
|---|---|
| Base Tariff | 3.1% (MFN/Standard Duty) |
| Section 301 Surtax | +25.0% (Retaliatory/Special Duty on Chinese Goods) |
| Section 122 Surcharge | +10.0% (Specific provision, possibly related to de minimis or specific country provisions) |
| Total Tax Rate | 38.1% |
| Tax Calculation | CIF Value Γ 38.1% |
| De Minimis Exemption | β Not Eligible (High tariff rate typically excludes small packages from de minimis benefits) |
| Legal Basis Path | USITC:3917.xxxx.xxxx β Section 301: Footnote 9903.88.01 β Section 122: Specific Provision |
π Explanation:
- The 3.1% is the standard Most Favored Nation (MFN) duty for plastic hoses. - The 25% is the additional duty imposed under Section 301 of the Trade Act of 1974, targeting specific Chinese imports. - The 10% labeled as "122 Section Tariff" suggests an additional layer of duty, potentially under Section 232 (though usually for steel/aluminum, sometimes misapplied in data) or a specific Section 122 action related to trade remedies. Note: In standard US-China trade, the primary extra duties are Section 301. Ensure the "122" reference aligns with the latest customs bulletin. - Total Effective Duty: 38.1%. This is a high-cost item for importers.
π οΈ Four, Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
β 1. Preparation Checklist (Non-Negotiable)
| Document | Required | Explanation |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must state: Material (e.g., "100% High-Density Polyethylene"), Diameter, Wall Thickness, Pressure Rating. |
| β Material Composition Certificate | βοΈ | Critical for distinguishing between 3917.32 (PE) and 3917.31 (Other Plastic). |
| β Product Photos | βοΈ | Clear shots of the hose interior, exterior, and any markings/coding. |
| β Commercial Invoice | βοΈ | Must clearly state "Plastic Conveyor Hose" and not just "Plastic Tubing" to avoid classification disputes. |
| β Certificate of Origin (CO) | βοΈ | Required to prove origin for tariff calculation. |
| β Packing List | βοΈ | Detail net/gross weight and dimensions. |
β 2. Declaration Strategy (Key Mnemonics)
π₯ "Material First, Reinforcement Second, Name Accurate, Tariff Clear!"
| Scenario | Correct Declaration | Incorrect Practice |
|---|---|---|
| PE Hose, Reinforced | 3917.32.00.20 |
Mislabeling as "PVC Hose" β Risk of reclassification |
| Non-PE Plastic Hose | 3917.31.00.00 or 3917.32.00.10 |
Grouping all plastic hoses under one code β Audit risk |
| Conveyor System Parts | Declare as Hose (3917), not Machinery (8433) |
Declaring as "Agricultural Machinery Part" β Higher duty + Wrong regime |
| Small Sample Roll | Still subject to 38.1% | Assuming small quantity escapes tax β Penalty! |
β 3. Special Handling Cases
| Case | Handling Advice |
|---|---|
| Multi-Material Hoses | If the hose has a PE inner layer but a nylon outer layer, declare based on the essential character (usually inner material for conveyance). Provide a bilayer material breakdown. |
| Food-Grade vs. Industrial | Even if "Food-Grade," if the material is PE, it still falls under 3917. Do not claim "Food Safety" for tariff reduction unless thereβs a specific HTS exclusion (rare for plastics). |
| Reinforced Hoses | If the reinforcement is metal (steel braiding), the HS code might shift to Chapter 73 or 72. For pure plastic/plastic-coated, stick to 3917. |
| Origin Shift | If manufactured in Vietnam using Chinese PE raw materials, ensure substantial transformation occurs to claim Vietnam origin and avoid Section 301 tariffs. |
π Five, Global Market Customs Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate (CN Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3917.32.00.20 / 3917.31.00.00 |
38.1% | N/A (Plastics) | High Section 301 + 122 duties apply. |
| π¨π³ China | 3917.31.00.00 |
3.1% - 5% | CCC (if applicable) | Low duty for domestic use or re-export. |
| πͺπΊ EU | 3917.23 / 3917.29 |
0% - 4.5% | REACH Compliance | No Section 301 equivalent. REACH registration required for chemicals. |
| π¬π§ UK | 3917.23 / 3917.29 |
0% - 4.5% | UKCA Marking | Post-Brexit tariffs generally favorable for plastics. |
| π»π³ Vietnam | 3917.23 / 3917.29 |
0% - 5% | None | Potential for duty-free if under RCEP or bilateral treaties. |
π Conclusion:
- The US market is the most challenging due to the 38.1% combined duty. - EU/UK markets are favorable with low base duties, but REACH compliance is a significant barrier for plasticizers/additives. - Diversification Strategy: Consider sourcing or finishing in Vietnam/Malaysia to mitigate US tariffs, ensuring Rules of Origin are strictly met.
π Six, Common Errors & Pitfall Guide (Lessons Learned)
β Error 1: Declaring "Plastic Hose" as "Pipe" (3917.10)
π Consequence: Misclassification. Hoses are flexible; pipes are rigid. If flexible, it must be 3917.2x or 3917.3x.
β Error 2: Ignoring "Reinforcement"
π Consequence: 3917.31 (Unreinforced) vs 3917.32 (Reinforced). If the hose has a textile mesh, it must be 3917.32. Incorrect declaration can lead to fines.
β Error 3: Claiming "De Minimis" for small rolls
π Consequence: Section 301 goods are generally excluded from the $800 de minimis exemption. Even a $50 hose is subject to 38.1% duty and potential penalties.
β Error 4: Vague Material Description ("Plastic")
π Consequence: Customs may classify under the worst-case scenario or demand additional testing to determine if itβs PE, PVC, or PPR, leading to delays.
β Correct Approach:
"Conveyor Hose, Flexible, Inner Layer: 100% Polyethylene (PE), Outer Layer: Nylon, Diameter: 2 inch, Pressure: 150 PSI, Model: XYZ, Made in China."
π― Seven, Conclusion: Professional Declaration, Cost Control, Efficiency!
π― Remember the Mnemonic:
πΉ "Material Dictates Code, Reinforcement Determines Sub-Code, US Tariffs are Heavy (38.1%), Origin is Key!"
πΉ "Don't guess PE vs. PVC, Customs will test! Don't ignore 301, Profit is lost!"
π Pro Tip:
If your plastic conveyor hoses are not made of PE, verify if they fall under PVC (3917.21) or PPR (3917.22), as rates may vary slightly, but the 301/122 surcharges likely remain.
For US imports, pre-classification rulings are highly recommended given the high stakes. Consider supply chain restructuring to third countries if volume is significant.
π£ Take Action Now:
π Contact a Licensed Customs Broker + Provide Material SDS + Request Advance Ruling
π Secure your supply chain, avoid unexpected 38.1% shocks, and keep your logistics flowing smoothly!
β¨ Professional Customs Clearance Starts with Precise Classification!
πΌ Every percentage point matters in global trade!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.