Plastic Exterior Multi function Wallet
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3926908800 | 0.0% | CN | US | Official Doc |
| 3926901000 | 20.9% | CN | US | Official Doc |
| 4202321000 | 0.0% | CN | US | Official Doc |
| 4202329900 | 52.6% | CN | US | Official Doc |
Product Images
AI Analysis
π³ Plastic Exterior Multi-Function Wallet
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π Part I: Product Definition & Classification: Do You Really Understand "Plastic Wallets"?
A Plastic Exterior Multi-Function Wallet is a personal accessory used to carry money, cards, and identification. In international trade, classification depends heavily on material composition (Plastics vs. Other Materials) and function/structure (Simple Container vs. Reinforced/Laminated).
1. Pure Plastic Wallets (Headings 3901β3914)
- Made entirely of plastics (e.g., PVC, PET, PP) without significant textile or leather backing.
- Classified under Chapter 39.
2. Composite/Textile-Backed Plastic Wallets (Heading 4202)
- If the wallet has an outer surface of plastic sheeting BUT is backed by textile materials, or is made of materials primarily covered by plastics/textiles (like shopping bags, handbags, or structured wallets), it falls under Chapter 42.
- Note: Most "multi-function" wallets with fabric lining or textile backing are classified here.
β οΈ Critical Distinction Point:
- If it is a simple plastic sleeve/folder with no textile/leather backing β 3926.90.88.00
- If it is a structured wallet (pocket/handbag type) with plastic outer surface but classified as "other materials of headings 3901-3914" (rare) or more commonly, if it falls under the broad definition of articles of leather/plastics/textiles for carrying in pocket/handbag β 4202.32.10.00 (if reinforced/laminated) or 4202.32.99.00 (if textile outer).
- Specific Note on Data: The data provided includes a specific entry for "Wallets... of plastics" under 3926.90.88.00 and "Articles of a kind normally carried in the pocket... with outer surface of sheeting of plastics... Of reinforced or laminated plastics" under 4202.32.10.00. We must adhere strictly to these provided codes.
π¦ Part II: HS Code Classification Details (Based on Provided Data)
| HS Code | Product Description | Applicable Scenario | Material/Structure Key |
|---|---|---|---|
3926.90.88.00 |
Other articles of plastics...: Wallets, purses, and similar containers, of plastics | Simple plastic wallets, plastic card holders, transparent PVC wallets | β No textile/leather backing; Pure plastic articles |
4202.32.10.00 |
Trunks, suitcases...; handbags, shopping bags, wallets... of sheeting of plastics...: Of reinforced or laminated plastics | Structured wallets, multi-function wallets with plastic laminate/reinforcement, durable plastic wallets | β Reinforced/Laminated Plastic Outer |
4202.32.99.00 |
...of sheeting of plastics or of textile materials: With outer surface of textile materials: Other | Wallets where the outer surface is primarily textile (even if plastic coating exists) | β Outer Surface is Textile (not pure plastic) |
3926.90.10.00 |
...Other: Buckets and pails | Irrelevant (Excluded for clarity) | N/A |
π Key Clarification from Data:
- The dataset explicitly lists "Wallets, purses, and similar containers, of plastics" under 3926.90.88.00. This is the primary code for pure plastic wallets.
- It also lists "Articles of a kind normally carried in the pocket or in the handbag... With outer surface of sheeting of plastics... Of reinforced or laminated plastics" under 4202.32.10.00. This applies to high-quality, durable, multi-function wallets made with reinforced/laminated plastic sheets (often treated like leather/plastic composites in Chapter 42).
- Do not use 4202.32.99.00 unless the outer surface is textile. If the exterior is plastic (even with laminate), use 4202.32.10.00.
π° Part III: 2026 Latest Tariff Rate Details (Based on Provided Data)
β Scope: Based on the provided tax data snippets.
β Status: Tax information retrieval status as per data.
π― 1. 3926.90.88.00 ββ Wallets, purses, similar containers, of plastics
| Item | Content |
|---|---|
| Tax Detail | Failed to retrieve tax information |
| Total Tax | Error |
| Interpretation | The system could not retrieve specific base or additional tax rates for this code in the provided dataset. |
| Recommendation | Critical Action Required: This code requires manual verification with customs authorities or a licensed broker. Do not rely on automated estimates for this specific HS code without confirmation. |
π Explanation:
- The data source indicates an error in tax retrieval for pure plastic wallets under Chapter 39.
- This often happens with niche sub-codes like3926.90.88.00(Other other).
- Risk: High uncertainty. Clearance may be delayed for tariff verification.
π― 2. 4202.32.10.00 ββ Wallets, reinforced/laminated plastics, pocket/handbag type
| Item | Content |
|---|---|
| Base Duty Rate | 0.0% |
| Additional Duty Rate | 0.0% |
| Total Tax | 0.0% |
| Tax Detail | "εΊη‘ε ³η¨: 0.0%, ε εΎε ³η¨: 0.0%" (Base Duty: 0.0%, Additional Duty: 0.0%) |
| Legality Path | HS Code 4202.32.10.00 β Chapter 42 (Articles of Leather/Plastics/Textiles) |
π Explanation:
- Excellent Tariff Outcome: This code shows 0% total duty.
- Why? Many structured plastic/composite wallets fall under Chapter 42, which often has favorable or zero base duties for certain categories, and in this dataset, no additional tariffs are listed for this specific sub-code.
- Condition: The wallet must be reinforced or laminated plastics (not just a simple plastic sleeve).
π― 3. 4202.32.99.00 ββ Wallets, outer surface textile
| Item | Content |
|---|---|
| Base Duty Rate | 0.0% |
| Additional Duty Rate | 0.0% |
| Total Tax | 0.0% |
| Tax Detail | "εΊη‘ε ³η¨: 0.0%, ε εΎε ³η¨: 0.0%" |
| Legality Path | HS Code 4202.32.99.00 β Chapter 42 |
π Explanation:
- Also 0% total duty.
- Condition: The outer surface must be textile materials. If the exterior is plastic, do not use this code. Misclassification could lead to penalties.
β Excluded Code: 3926.90.10.00 ββ Buckets and pails
| Item | Content |
|---|---|
| Total Tax | 0.0% |
| Note | Not applicable to wallets. |
π οΈ Part IV: Practical Clearance Advice (Avoiding Pitfalls)
β 1. Preparation Checklist (Essential)
| Document | Must Provide | Description |
|---|---|---|
| β Product Photos | βοΈ | Clear images of exterior material. Is it smooth plastic? Laminated? Fabric? |
| β Material Breakdown | βοΈ | % Composition of outer layer vs. lining. Crucial for distinguishing Chapter 39 vs. 42. |
| β Structure Diagram | βοΈ | Show if it has compartments, card slots, coin pouches (defines "multi-function"). |
| β Commercial Invoice | βοΈ | Must specify "Plastic Wallet" or "Reinforced Plastic Wallet". Avoid vague terms like "Accessory". |
| β Packaging List | βοΈ | Show if wallets are bulk-packed or individually boxed. |
β 2. Declaration Strategy (Key Rules)
π₯ "Material Dictates Chapter: Plastic Sleeve = Ch39, Reinforced/Structured = Ch42!"
| Scenario | Correct HS Code | Error to Avoid |
|---|---|---|
| Simple Plastic Sleeve/Folder | 3926.90.88.00 |
Misclassifying as Ch42 β 0% (incorrect, but Ch39 rate unknown/error) |
| Structured Wallet, Plastic Outer, Reinforced/Laminated | 4202.32.10.00 |
Misclassifying as Ch39 β Risk of tax error |
| Structured Wallet, Textile Outer (with plastic coating) | 4202.32.99.00 |
Misclassifying as Ch39 or 4202.32.10.00 β Wrong material definition |
| Bucket/Pail | 3926.90.10.00 |
NEVER use for wallets! |
β 3. Special Considerations
| Situation | Handling Advice |
|---|---|
| "Multi-Function" Claim | Ensure the description highlights utility (card slots, coin pouch) to support classification as a "wallet" rather than a simple "plastic sheet". |
| Reinforced/Laminated | If the plastic is coated with fabric or has a plastic core with fabric backing, it must go to 4202. Pure plastic sheets go to 3926. |
| Tax Uncertainty on 3926.90.88.00 | Since the tax data shows "Failed to retrieve", consider if the product can be classified under 4202.32.10.00 (0% tax) by adding a reinforced/laminated layer or claiming composite structure. This is a major cost-saving strategy. |
π Part V: Global Market Comparison (Based on Provided Data)
| Market | Recommended HS Code | Tariff | Note |
|---|---|---|---|
| πΊπΈ USA | 4202.32.10.00 |
0.0% | Best option if product qualifies as reinforced/laminated. |
| πΊπΈ USA | 3926.90.88.00 |
Error/Unknown | High risk due to tax retrieval failure. |
| π¨π³ China | 4202.32.10.00 |
0.0% | Consistent with provided data. |
π Conclusion:
- Priority Code:4202.32.10.00is the safest and most beneficial code from the provided data, offering 0% tax with clear legal basis.
- Avoid Code:3926.90.88.00due to tax retrieval error. Use only if the product is indisputably a simple plastic article with no reinforcement/lamination.
π Part VI: Common Errors & Pitfalls (Lessons Learned)
β Error 1: Declaring a reinforced plastic wallet as 3926.90.88.00
π Consequence: Tax retrieval fails β Customs hold for manual review β Delayed shipment.
π Fix: Check if it qualifies as "reinforced/laminated" β Use 4202.32.10.00 for 0% tax.
β Error 2: Declaring a textile-outer wallet as 4202.32.10.00
π Consequence: Incorrect material description β Penalty or Re-assignment β Additional duties if misclassified.
π Fix: Ensure outer surface is plastic β Use 4202.32.10.00. If textile, use 4202.32.99.00.
β Error 3: Ignoring the "Multi-Function" aspect
π Consequence: Customs may classify as a simple "plastic article" β Wrong HS code.
π Fix: Clearly state "Wallet, multi-function, card slots, coin pouch" in description.
β Correct Declaration Example:
"Plastic Exterior Multi-Function Wallet, Reinforced PVC Outer, Textile Lining, Model XYZ, No Leather"
π― Part VII: Conclusion: Professional Declaration, Cost Optimization!
π― Key Takeaways:
πΉ "Tax Error on Ch39? Pivot to Ch42!"
- If your plastic wallet is reinforced or laminated, use4202.32.10.00for 0% tax and clear data.
- Avoid3926.90.88.00unless absolutely necessary, due to tax retrieval failure.
πΉ "Outer Surface Matters!"
- Plastic Outer + Reinforced β4202.32.10.00(0%)
- Textile Outer β4202.32.99.00(0%)
- Simple Plastic Sleeve β3926.90.88.00(Tax Unknown/Error)
π Pro Tip:
To ensure 0% tax and smooth clearance, design your multi-function wallet with a reinforced or laminated plastic exterior. This allows classification under
4202.32.10.00, avoiding the tax uncertainty of Chapter 39.
π£ Immediate Action:
π Consult your customs broker to confirm if your "Plastic Exterior" wallet qualifies as "Reinforced/Laminated" for
4202.32.10.00.
π Optimize your tariff structure today!
β¨ Precision in Classification, Precision in Profit!
πΌ Every percent of duty saved is profit earned!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.