Plastic Roller Blind Accessories
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7326200090 | 88.9% | CN | US | Official Doc |
| 8302416050 | 88.9% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 3926305000 | 22.8% | CN | US | Official Doc |
AI Analysis
π¨ Plastic Roller Blind Accessories
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Strategic Compliance Strategy
π I. Product Definition & Classification: Do You Truly Understand "Plastic Roller Blind Accessories"?
Roller blind accessories are the mechanical components that enable the operation, mounting, and aesthetic finish of window coverings. In international trade, the classification of these accessories depends heavily on their material composition, function, and specific use.
For "Plastic" accessories, the key distinction lies in whether they are primarily identified as plastic articles or as general metal/plastic hardware fixtures.
β οΈ Key Distinction Point:
- If the accessory is a plastic part (e.g., casings, gears, knobs, pull chains) primarily classified under Chapter 39 β Go to 3926.30.50.00. - If the accessory is a metal part (e.g., brackets, springs, axles) even if used in a plastic blind system β Go to 7326 or 8302. - β οΈ WARNING: The user input specifies "Plastic," but the<DATA>contains multiple HS codes. We must analyze why different codes apply based on potential misclassification or mixed-material scenarios.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Material Focus | Application Scenario | Tax Rate Context |
|---|---|---|---|---|
3926.30.50.00 |
Other articles of plastics and articles of other materials of heading 3902 to 3911 (Plastic parts) | Plastic 𧱠| Plastic casings, gears, knobs, end caps, plastic pulleys | 22.8% (Lowest among options) |
7326.20.00.90 |
Other articles of iron or steel; fittings for roller blinds (Metal parts) | Iron/Steel βοΈ | Metal brackets, metal axles, steel springs, metal mounting plates | 88.9% (High) |
8302.41.60.50 |
Base mountings and similar fittings, of base metal (Hardware fittings) | Base Metal π© | Metal hinges, slides, tracks, universal joints, metal attachment pieces | 88.9% (High) |
7326.90.86.88 |
Other articles of iron or steel (Miscellaneous metal parts) | Iron/Steel βοΈ | Generic metal fittings, non-specific steel parts, miscellaneous metal components | 87.9% (High) |
π Critical Reminder:
- Although the product name says "Plastic," customs authorities may scrutinize mixed-material items.
- If the item is 100% plastic, it MUST be classified under 3926.30.50.00.
- If the item contains metal parts (e.g., a plastic casing with a metal spring or metal pin), customs may reclassify it as a metal article (7326 or 8302), leading to massive tariff increases (from ~23% to ~89%).
- Do not assume "Blind Accessory = Metal Fitting." Material composition is king.
π° III. 2026 Latest Tariff Rate Breakdown (Including Additional Taxes & Policy Surcharges)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: From November 10, 2025 (including subsequent imports)
π― 1. 3926.30.50.00 ββ Plastic Articles (Plastic Roller Blind Parts)
| Item | Content |
|---|---|
| Base Tariff | 5.3% (ad valorem) |
| USITC Additional Tariff | +7.5% (From USITC Footnote related to Section 301/Reciprocal) |
| IEEPA Additional Tariff | +10% (Section 122 Tariff for specific steel/aluminum/copper? NO - This is plastic. The 10% IEEPA is general China surcharge or specific section. Correction based on data: Data says "122ζ‘ζ¬Ύε ³η¨10%" for this code. This likely refers to a specific provision not limited to metals in this dataset context, or a typo in source. We follow the source: 10%.) |
| Total Tariff Rate | 22.8% |
| Tax Calculation | CIF Value Γ 22.8% |
| De Minimis Eligibility | β NO (deny_de_minimis) |
| Legal Basis Path | IEEPA:122ζ‘ζ¬Ύ β USITC:3926.30.50.00 β FOOTNOTE:Related |
π Explanation:
- This is the MOST COST-EFFECTIVE classification for 100% plastic accessories.
- The total tax is 22.8%, significantly lower than metal counterparts.
- Crucial: Ensure the product is strictly plastic. Any metal component risks reclassification.
π― 2. 7326.20.00.90 ββ Iron/Steel Articles (Metal Roller Blind Parts)
| Item | Content |
|---|---|
| Base Tariff | 3.9% |
| USITC Additional Tariff | +25.0% (Section 301) |
| IEEPA/122 Additional Tariff | +10% (Section 122 Tariff for Steel/Aluminum/Copper) PLUS a 50% surcharge for steel/aluminum/copper products under Section 232/122 interpretations in this dataset. |
| Total Tariff Rate | 88.9% |
| Tax Calculation | CIF Value Γ 88.9% |
| De Minimis Eligibility | β NO |
| Legal Basis Path | IEEPA:122ζ‘ζ¬Ύ β USITC:7326.20.00.90 β FOOTNOTE:Steel/Aluminum |
π Explanation:
- If your "plastic" accessory has a metal spring or metal pin, customs may classify it here.
- The 50% steel/aluminum surcharge applies, leading to a devastating 88.9% total rate.
- Risk: High. Avoid misclassification.
π― 3. 8302.41.60.50 ββ Base Metal Fittings (Hardware)
| Item | Content |
|---|---|
| Base Tariff | 3.9% |
| USITC Additional Tariff | +25.0% |
| IEEPA/122 Additional Tariff | +10% (Section 122) PLUS 50% for steel/aluminum/copper. |
| Total Tariff Rate | 88.9% |
| Tax Calculation | CIF Value Γ 88.9% |
| De Minimis Eligibility | β NO |
π Explanation:
- This code is for metal fittings (hinges, slides, tracks).
- If your accessory is a metal bracket or metal track, use this code.
- Not applicable to 100% plastic items.
π― 4. 7326.90.86.88 ββ Other Iron/Steel Articles
| Item | Content |
|---|---|
| Base Tariff | 2.9% |
| USITC Additional Tariff | +25.0% |
| IEEPA/122 Additional Tariff | +10% (Section 122) PLUS 50% for steel/aluminum/copper. |
| Total Tariff Rate | 87.9% |
| Tax Calculation | CIF Value Γ 87.9% |
| De Minimis Eligibility | β NO |
π Explanation:
- Catch-all code for miscellaneous metal parts not specified elsewhere.
- High tax rate due to steel/aluminum surcharges.
π οΈ IV. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
β 1. Preparation Checklist (Non-negotiable)
| Material | Mandatory Provision | Description |
|---|---|---|
| β Material Composition Certificate | βοΈ | Must explicitly state 100% Plastic (e.g., PP, ABS, Nylon) if claiming 3926.30.50.00. |
| β Product Photographs | βοΈ | Clear images showing no metal parts (springs, pins, axles). |
| β Bill of Materials (BOM) | βοΈ | List all components. If any metal part >5% by weight or function, risk reclassification. |
| β Commercial Invoice | βοΈ | Description: "Plastic Parts for Roller Blinds, No Metal Components." |
| β Packing List | βοΈ | Specify quantity and weight per package. |
β 2. Declaration Tips (Key Mantra)
π₯ "Material is Key, Plastic Wins, Metal Loses, 23% vs 89%!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| 100% Plastic Casings/Gears | 3926.30.50.00 |
Mislabel as "Blind Fitting" β Risk 88.9% |
| Plastic + Metal Spring | 7326.20.00.90 or 8302.41.60.50 |
Hide metal part β Seizure/Fine |
| Mixed Plastic/Metal Assembly | Split Declaration or Metal Code | Single code for mixed β Customs Audit |
| Generic "Accessories" | Specific Description: "Plastic Gear for Roller Blind" | Vague "Blind Parts" β Delay/Reclassification |
β 3. Special Cases Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Parts | Provide customer order + design specs to prove plastic nature. |
| Mixed Material (e.g., Plastic housing with metal pin) | High Risk. Consult customs broker. May need to declare as metal article or seek pre-ruling. |
| Plastic Blinds with Metal Rollers | Roller is Metal, Casing is Plastic. Declare separately! Do not bundle. |
| Export to Non-US Markets | US tariffs are extremely high. Consider transshipment (Vietnam/Mexico) if compliant. |
π V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification Required | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3926.30.50.00 (Plastic) |
22.8% | No major tech certs | Avoid Metal Codes (88.9%) |
| π¨π³ China | 3926.90.90.90 |
5% | CCC (if applicable) | Low tariff |
| πͺπΊ EU | 3926.90.97 |
0% - 4.5% | CE + REACH | No Section 301 |
| π¦πΊ Australia | 3926.90.90 |
5% | RCM | No additional surcharges |
| π―π΅ Japan | 3926.90.90 |
0% - 5% | PSE | Competitive |
π Conclusion:
- USA is the highest-cost market for these goods.
- Plastic classification saves ~66% in taxes compared to metal classification.
- Accuracy in material declaration is critical to avoid penalties.
π VI. Common Errors & Pitfall Guide (Lessons Learned)
β Error 1: Declaring a plastic gear with a metal axle as 3926.30.50.00.
π Consequence: Customs reclassifies as metal β Tax jumps from 22.8% to 88.9%. Back taxes + penalties.
β Error 2: Using vague description "Blind Accessory" without material specification.
π Consequence: Customs assumes worst-case (metal) β Delays and audits.
β Error 3: Mixing plastic and metal parts in one box without separate declaration.
π Consequence: Entire shipment may be reclassified under the higher tax code (Metal).
β Error 4: Ignoring Section 122/232 Steel/Aluminum Surcharges.
π Consequence: Unexpected 50% surcharge if misclassified as metal.
β Correct Practice:
"Plastic Gears for Roller Blinds, 100% ABS, No Metal Components, Model XYZ"
π― VII. Conclusion: Precision Classification, Maximize Profit!
π― Remember the Mantra:
πΉ "Plastic = 23%, Metal = 89%."
πΉ "Material Declaration is King."
πΉ "One Metal Pin Can Cost You 66% More."
π Tips:
- If your product is 100% plastic, insist on 3926.30.50.00.
- If it contains any metal, consult a customs broker to determine if the primary character is plastic or metal.
- Consider supplier diversification (Vietnam, Thailand) for US-bound goods to mitigate tariffs.
π£ Immediate Action:
π Contact a professional customs broker + Provide Material Certificates + Request HS Code Pre-Ruling
π Ensure your Plastic Roller Blind Accessories clear customs smoothly, efficiently, and profitably!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Every Percent of Tax Saves is Pure Profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.