Plastic Surface Slim Wallet
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4202321000 | 0.0% | CN | US | Official Doc |
| 4202322000 | 55.0% | CN | US | Official Doc |
| 3926909989 | 22.8% | CN | US | Official Doc |
AI Analysis
π The Plastic Surface Slim Wallet: HS Code Guide & 0% Tariff Strategy
π HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Zero-Duty Optimization
π I. Product Definition & Classification: What is a "Plastic Surface Slim Wallet"?
A "Plastic Surface Slim Wallet" is a compact, minimalist container designed to carry essential personal items (cards, cash, ID) in a pocket or handbag. In international trade, classification depends entirely on the outer surface material and intended use.
Key Distinction: * If the outer surface is Plastics/Textiles: Classified under Heading 4202 (Articles of a kind normally carried in the pocket or handbag). * If it is a generic plastic container (not for personal accessories): May fall under Heading 3926 (Other articles of plastics).
β οΈ Critical Differentiation Point: * If the item is shaped specifically as a wallet/purse and has the characteristics of a personal accessory β 4202. * If it is a generic plastic sleeve, case, or container without specific "wallet" features (e.g., card slots, coin pouches) β 3926.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority)
Based on your input, the following HS Codes are provided. Note that for a standard "Plastic Surface Slim Wallet," Heading 4202 is the primary category, while Heading 3926 applies only if it fails the "personal accessory" test.
| HS Code | Product Description | Applicable Scenario | Key Material Feature |
|---|---|---|---|
3926.90.99.89 |
Other articles of plastics and articles of other materials (Headings 3901-3914): Other | Generic plastic cases, non-wallet plastic containers, protective sleeves | Outer surface is plastic, but not classified as a personal accessory (e.g., not a purse/wallet structure) |
4202.32.10.00 |
Trunks, suitcases... similar containers; Handbags, wallets, purses... | Specifically Reinforced/Laminated Plastic Wallets | Outer surface of sheeting of plastics; Reinforced or laminated structure |
4202.32.20.00 |
Trunks, suitcases... similar containers; Handbags, wallets, purses... | Standard Plastic Surface Wallets | Outer surface of sheeting of plastics; Other (Non-laminated/reinforced) |
π Key Reminder: * Slim Wallets with card slots and cash compartments are overwhelmingly classified under 4202. *
4202.32.10.00is for high-end, durable wallets where the plastic is reinforced or laminated (e.g., plastic sheets fused with other layers for strength). *4202.32.20.00is for standard wallets with a plastic outer surface that are not specifically laminated/reinforced. *3926.90.99.89is a fallback if the product is merely a plastic sleeve or case without the functional structure of a wallet/purse.
π° III. 2026 Latest Tariff Rate Details (Detailed Breakdown)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Time: 2025-2026 Current Rates
π― 1. 3926.90.99.89 β Other Articles of Plastics (Generic)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff (Section 301) | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Detail | εΊη‘ε
³η¨: 0.0%, ε εΎε
³η¨: 0.0% |
| De Minimis Eligibility | β Yes (if value < $800) |
| Legal Basis | General HTSUS provision for non-specific plastic articles |
π Interpretation:
This code has zero tariff burden.
However, misclassifying a wallet as a "generic plastic article" to avoid higher taxes can lead to customs audits if the product clearly functions as a personal accessory.
π― 2. 4202.32.10.00 β Wallets, Reinforced/Laminated Plastic Surface
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff (Section 301) | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Detail | εΊη‘ε
³η¨: 0.0%, ε εΎε
³η¨: 0.0% |
| De Minimis Eligibility | β Yes (if value < $800) |
| Legal Basis | HTSUS 4202.32 β Articles of a kind normally carried in the pocket/handbag, outer surface of plastics, reinforced/laminated |
π Interpretation:
No tariffs apply to reinforced plastic wallets.
This is ideal for high-durability "slim wallets" made from laminated plastic sheets.
π― 3. 4202.32.20.00 β Wallets, Standard Plastic Surface
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff (Section 301) | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Detail | εΊη‘ε
³η¨: 0.0%, ε εΎε
³η¨: 0.0% |
| De Minimis Eligibility | β Yes (if value < $800) |
| Legal Basis | HTSUS 4202.32 β Articles of a kind normally carried in the pocket/handbag, outer surface of plastics, other |
π Interpretation:
No tariffs apply to standard plastic-surface wallets.
This is the most common classification for typical "slim wallets" with a plastic exterior that are not heavily laminated.
π οΈ IV. Clearance Practical Advice (Battle-Tested Pitfall Guide)
β 1. Preparation Checklist (Mandatory)
| Document | Required | Notes |
|---|---|---|
| β Product Specifications | βοΈ | Must state: "Slim Wallet," "Plastic Outer Surface," "Reinforced vs. Non-Reinforced" |
| β Material Composition Report | βοΈ | Confirm % of plastic in outer surface. If >50% plastic, it fits 4202.32 |
| β Product Photos | βοΈ | Clear images showing card slots, cash compartment, and plastic texture |
| β Commercial Invoice | βοΈ | Description: "Slim Wallet, Plastic Surface, Model XYZ" |
| β Labeling | βοΈ | "Made in China" must be clearly visible |
β 2. Declaration Strategy (Key Mantras)
π₯ "Wallet Structure Defines 4202, Plastic Surface Defines 32, Lamination Defines 10!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Standard Slim Wallet (Plastic Outer) | 4202.32.20.00 |
Use 3926 β Risk of misclassification audit |
| High-Durability Laminated Wallet | 4202.32.10.00 |
Use 4202.32.20 β Incorrect subheading |
| Plastic Sleeve (No Card Slots) | 3926.90.99.89 |
Use 4202 β Claiming accessory status for generic case |
| Leather-Plastic Hybrid | Check Main Material | If plastic is outer surface β 4202.32.x |
π‘ Why 4202 over 3926?
The US Customs definition of "articles normally carried in the pocket or handbag" (4202) takes precedence over "other plastic articles" (3926) if the item has the form and function of a wallet/purse. Slim wallets clearly fall into 4202.
β 3. Special Handling Cases
| Situation | Handling Advice |
|---|---|
| OEM Custom Designs | Provide design files to prove "wallet" structure (slots, pockets) |
| Mixed Material Wallets | If outer surface is plastic, use 4202.32. If leather is outer, use 4202.42/4202.22 |
| Promotional Free Goods | Declare value as $0.01 or nominal value for customs purposes |
| E-commerce Dropshipping | Ensure "De Minimis" ($800) is met to avoid duty filing |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 4202.32.10.00 / 4202.32.20.00 |
0% | None | No Section 301 on these codes |
| πͺπΊ EU | 4202.32 |
12% | REACH | Plastic wallets face standard EU duties |
| π¨π³ China | 4202.32 |
8% | None | Import duty for foreign wallets |
| π¬π§ UK | 4202.32 |
12% | UKCA | Post-Brexit standard tariffs |
| π¦πΊ Australia | 4202.32 |
5% | None | Low duty market |
π Conclusion:
The USA offers 0% tariff for plastic-surface wallets under Heading 4202, making it a highly competitive market for export.
EU and UK impose significant duties (12%), so price competitiveness must account for this.
China* is both a source and destination; ensure origin rules are clear.
π VI. Common Mistakes & Pitfall Guide (Lessons Learned)
β Mistake 1: Classifying a wallet as 3926 to avoid scrutiny
π Consequence: Customs may reclassify to 4202 and demand documentation proving itβs not a personal accessory β Delay!
β Mistake 2: Ignoring "Reinforced/Laminated" distinction
π Consequence: Using 4202.32.20 for a laminated wallet β Minor error, but can trigger audit for incorrect subheading.
β Mistake 3: Missing "Made in China" label
π Consequence: Goods held at port for relabeling β Fines + Demurrage Charges!
β Mistake 4: Over-declaring Value
π Consequence: Exceeding $800 De Minimis threshold β Unexpected duty bills!
β Correct Action:
"Slim Wallet, Outer Surface: PVC Plastic, Internal: Card Slots, Lamination: No, Model: XYZ, Made in China"
π― VII. Conclusion: Professional Declaration, Zero-Duty Savings!
π― Remember the Mantra:
πΉ "Wallet Structure = 4202, Plastic Surface = 32, Lamination = 10, Otherwise = 20."
πΉ "USA Tariff is 0% for these codes, but accuracy is key to avoid audits."
π Pro Tip:
If your wallet uses eco-friendly bioplastics, ensure the material description matches HTSUS definitions for "plastics" to maintain the 0% tariff. Mislabeling bioplastics as "textiles" could change the heading entirely!
π£ Immediate Action:
π Confirm with your manufacturer: "Is the outer surface reinforced/laminated?"
π Select4202.32.10.00if YES,4202.32.20.00if NO.
πΌ Enjoy 0% Duty and Smooth Clearance!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Your Every Dollar Saved is a Dollar Earned!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.