Polyamide Composite Film
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3920920000 | 39.2% | CN | US | Official Doc |
| 3920991000 | 41.0% | CN | US | Official Doc |
| 3908100000 | 41.3% | CN | US | Official Doc |
| 3908907000 | 41.5% | CN | US | Official Doc |
| 5407410030 | 48.6% | CN | US | Official Doc |
Product Images
AI Analysis
π§ͺ Polyamide Composite Film (PA Composite Film)
π HS Code Reference & Clearance Guide | 2026 Latest Tariff Full Analysis | Professional-Level Customs Strategy
π I. Product Definition & Classification: Do You Really Understand "Polyamide Composite Film"?
Polyamide (PA) Composite Film, commonly known as Nylon Film, is a high-performance material widely used in food packaging, industrial barriers, and electronics insulation due its excellent mechanical strength, heat resistance, and barrier properties. In international trade, it is categorized based on its physical form and chemical composition:
1. Pure Polyamide Films (Plastics Chapter 39):
- Films made entirely or primarily of polyamide resins.
- Includes cast films, blown films, and biaxially oriented films.
- Key Distinction: If the product is a simple plastic film without significant textile weaving structure, it falls under Chapter 39.
2. Textile/Weave-Based Polyamide Films:
- Films or fabrics where polyamide is used as a reinforcing layer or woven base.
- Key Distinction: If the product has a textile weave structure or is classified as "fabric/sheet-like" rather than a continuous plastic film, it may fall under Chapter 54 (Synthetic Filaments).
β οΈ Critical Classification Point:
- If it is a continuous plastic sheet/film βε½η±» to Chapter 39 (Plastics).
- If it is a woven fabric or sheet-like textile βε½η±» to Chapter 54 (Synthetic Filaments/Fabrics).
- If it is in primary shapes (granules/powders) βε½η±» to Chapter 39 but different subheadings (though the user input specifies "Film", so we focus on film forms).
π¦ II. HS Code Classification Details (2026 Latest Tariff Authoritative Comparison)
Based on the provided data, here is the detailed breakdown for Polyamide Composite Film:
| HS Code | Product Description | Application Scenario | Material/Form Type | Total Tax Rate |
|---|---|---|---|---|
3920.92.00.00 |
Polyamide Film, Material: Polyamide, Form: Film | General packaging, industrial lining, insulation | Plastic Film | 39.2% |
3920.99.10.00 |
Polyamide Film, Material: Polyamide (Plastic), Form: Film | Specific plastic film categories not covered elsewhere | Plastic Film | 41.0% |
3908.10.00.00 |
Polyamide Film, Material: Polyamide, Form: Film (Primary Shape) | Note: Description says "Film" but HS 3908 is usually for primary shapes. Assuming data context implies specific film types or mislabeling in source, but we follow source. | Primary Shape/Film | 41.3% |
3908.90.70.00 |
Polyamide Film, Material: Polyamide, Form: Film (Primary Shape, Other) | Other polyamide forms not specified | Primary Shape/Film | 41.5% |
5407.41.00.30 |
Polyamide Film, Material: Polyamide (Nylon), Form: Fabric/Sheet-like | Textile applications, woven nylon sheets, composite fabrics with textile base | Textile/Fabric | 48.6% |
π Key Clarification:
- Chapter 39 (3920/3908): Applies to plastic films. The distinction between3920(Other plates, sheets, film) and3908(Primary shapes like granules/powders) is crucial. However, the provided data lists "Film" for 3908 codes, which is unusual. We must follow the provided data's description: if the source links "Film" to 3908, it may refer to specific film types or data anomalies, but the tax rates differ. For standard plastic films,3920is the most common correct classification.
- Chapter 54 (5407): Applies if the product is structurally a woven fabric or sheet made of synthetic filament yarns (Nylon), not just a extruded plastic film.
π° III. 2026 Latest Tariff Rate Detailed Explanation (Including Additional Taxes, Policy Add-ons)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Date: From November 10, 2025 (and subsequent imports)
π― 1. 3920.92.00.00 ββ Polyamide Film (Plastic Film)
| Item | Content |
|---|---|
| Base Tariff Rate | 4.2% (ad valorem) |
| Section 301 Additional Tax | +25.0% (From USITC Footnote 9903.88.01) |
| Section 122 Tariff | +10.0% (Specific additional tariff for certain Chinese imports) |
| Total Tax Rate | 39.2% |
| Tax Calculation | CIF Value Γ 39.2% |
| De Minimis Exemption Available | β No (deny_de_minimis) |
| Legal Basis Path | Base: 4.2% β Section 301: 25% β Section 122: 10% β HS: 3920.92.00.00 |
π Explanation:
- The base rate for other plastic films is low (4.2%).
- The 25% Section 301 tariff is the main burden for Chinese-origin plastics.
- The 10% Section 122 tariff is an additional layer on top.
- Total 39.2% is significant but lower than the textile classification.
π― 2. 3920.99.10.00 ββ Other Polyamide Film (Plastic)
| Item | Content |
|---|---|
| Base Tariff Rate | 6.0% |
| Section 301 Additional Tax | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Tax Rate | 41.0% |
| Tax Calculation | CIF Value Γ 41.0% |
| De Minimis Exemption Available | β No |
| Legal Basis Path | Base: 6.0% β Section 301: 25% β Section 122: 10% |
π Note:
- Slightly higher base rate (6.0%) than3920.92.
- Applicable if the film does not fall under the more specific3920.92category.
π― 3. 3908.10.00.00 & 3908.90.70.00 ββ Polyamide (Primary Shape/Film)
| Item | Content |
|---|---|
| Base Tariff Rate | 6.3% / 6.5% |
| Section 301 Additional Tax | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Tax Rate | 41.3% / 41.5% |
| Tax Calculation | CIF Value Γ 41.3% / 41.5% |
| De Minimis Exemption Available | β No |
| Legal Basis Path | Base: 6.3%/6.5% β Section 301: 25% β Section 122: 10% |
π Warning:
- These codes are typically for primary shapes (granules, powders). If your product is a film, using these codes may lead to misclassification and penalties. Only use if the product is indeed in a primary shape form as per customs interpretation.
π― 4. 5407.41.00.30 ββ Polyamide (Nylon) Fabric/Sheet-like
| Item | Content |
|---|---|
| Base Tariff Rate | 13.6% |
| Section 301 Additional Tax | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Tax Rate | 48.6% |
| Tax Calculation | CIF Value Γ 48.6% |
| De Minimis Exemption Available | β No |
| Legal Basis Path | Base: 13.6% β Section 301: 25% β Section 122: 10% |
π Critical Distinction:
- This code is for textile products (woven fabrics, sheets).
- If your "composite film" has a woven nylon base or is classified as a fabric, this is the correct code.
- Highest tax rate (48.6%) among the options. Avoid if possible by correctly classifying as a plastic film (Chapter 39).
π οΈ IV. Clearance Practical Suggestions (Battle-Tested Pitfall Avoidance Guide)
β 1. Preparation Checklist (All Required)
| Document | Mandatory | Explanation |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must detail material composition (100% PA vs. composite), thickness, width, and end-use. |
| β Material Safety Data Sheet (MSDS) | βοΈ | Proves chemical composition. |
| β Product Photos (Clear Labeling) | βοΈ | Show texture (smooth vs. woven) to distinguish between Chapter 39 (smooth plastic) and Chapter 54 (woven textile). |
| β Commercial Invoice | βοΈ | Clearly state "Polyamide Film" or "Nylon Fabric Sheet" based on correct classification. |
| β Packing List | βοΈ | Ensure weight and dimensions match. |
| β Certificate of Origin (CO) | βοΈ | Required for origin verification. |
β 2. Declaration Tips (Key Mantra)
π₯ "Smooth is Plastic (Ch39), Woven is Textile (Ch54). Declare Right, Tax Down!"
| Scenario | Correct HS Code | Error Consequence |
|---|---|---|
| Smooth, extruded plastic film | 3920.92.00.00 (39.2%) |
If misdeclared as textile β 48.6% (Overpaid) or Customs Penalty. |
| Woven Nylon Fabric/Sheet | 5407.41.00.30 (48.6%) |
If misdeclared as plastic β 39.2% (Underpaid) β Back Taxes + Penalties! |
| Composite (Plastic + Fabric) | Likely 3920 if plastic is dominant, or 5407 if textile is dominant. |
Complex. Must provide structure diagram. |
| Polyamide Granules/Powder | 3908.10.00.00 |
If declared as film β Misclassification Risk. |
π Note on Composites:
- If the film is a multi-layer laminate (e.g., PE/PA/PE), it is generally classified under Chapter 39 (Plastic) if plastic is the essential character.
- If it is a fabric coated with plastic, it may still be Chapter 54 (Textile).
- Best Practice: Provide a cross-section diagram to customs brokers to prove the structure.
β 3. Special Cases Handling
| Situation | Handling Advice |
|---|---|
| Multi-layer Composite Film | Classify based on the material giving the essential character. Usually, if it's a barrier film, it's Ch39. |
| Biodegradable Polyamide | Still Ch39 if it meets plastic film criteria. Provide biodegradability certificate if claiming green benefits. |
| High-Performance Engineering PA | Ensure the base rate is correct. Some special PA grades might have different base rates, but Section 301/122 still apply. |
| Samples for Testing | If value < $800, still subject to tariffs if not using de minimis (which is denied for these HS codes). |
π V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate (China Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3920.92.00.00 |
39.2% (Plastic Film) | No special certs required for general use | Highest barrier due to Section 301+122 |
| π¨π³ China | 3920.92.00.00 |
5-6% (Import Tariff) | CCC (if applicable) | Low tariff, no additional taxes |
| πͺπΊ EU | 3920.92.00.00 |
6.5% (Most Favored Nation) | REACH Registration | No Section 301/122 equivalents |
| π¬π§ UK | 3920.92.00.00 |
6.5% | UKCA (if applicable) | Post-Brexit tariff structure |
| π―π΅ Japan | 3920.92.00.00 |
3.9% | PSE (if electrical) | Competitive market |
π Conclusion:
- USA is the most expensive market for Polyamide Film due to 39.2% effective tax rate.
- Plastic Film (Ch39) is significantly cheaper than Textile (Ch54) in the US.
- Avoid Classifying as Textile unless it is truly woven fabric.
π VI. Common Errors & Pitfall Guide (Blood Lessons)
β Mistake 1: Declaring a woven nylon sheet as plastic film (3920).
π Consequence: Customs will reclassify to 5407 β Back taxes of 9.4% (48.6% - 39.2%) + Penalties.
β Mistake 2: Declaring a smooth plastic film as textile.
π Consequence: Overpaying 9.4% unnecessarily. Profit margin erosion.
β Mistake 3: Ignoring Section 122 (10%).
π Consequence: Under-declaration leads to customs audit and fines.
β Mistake 4: Using 3908 for Film.
π Consequence: Customs may reject as "Primary Shape" when it's a finished good β Delay/Return.
β Correct Declaration Example:
"Polyamide (Nylon) Plastic Film, Extruded, Clear, 50 Micron Thickness, For Food Packaging, HS 3920.92.00.00"
π― VII. Conclusion: Professional Declaration, Save Time, Reduce Costs!
π― Remember the Mantra:
πΉ "Smooth is Plastic (39%), Woven is Textile (48%). Classify Right, Save 9%!"
πΉ "Section 301 + 122 = High Barrier. Know Your Structure!"
π Pro Tip:
- If your product is a composite of plastic and fabric, request a Pre-Ruling from US Customs (CBP) before shipment. This is the safest way to avoid retroactive taxes.
- Consider Supply Chain Diversification: If possible, source from Vietnam or Thailand to potentially reduce Section 301/122 impacts (though rules of origin must be strict).
π£ Immediate Action:
π Consult a Licensed Customs Broker + Provide Product Photos/Structure Diagram + Apply for CBP Pre-Ruling.
π Ensure smooth clearance, minimize duties, and maximize profit!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Every Percent of Tax Saved is Profit Earned!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.