Polyethylene Anti static Board

🛡️ Polyethylene Anti-static Board (PE)

🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy 📌 I. Product Definition & Classification: Do You Really Understand "PE Anti-static Materials"?

Polyethylene (PE) Anti-static Boards are critical components in semiconductor manufacturing, electronics assembly, and cleanroom environments. Unlike standard plastics, these materials are engineered to dissipate static electricity, preventing damage to sensitive electronic components.

In international trade, the classification hinges on two critical factors: 1. Material Base: Polyethylene (PE) – Note: Your provided data references Polypropylene (PP), but the user input is PE. We must analyze based on the provided data's logic which treats "Polymer/Plastic" broadly, but strictly speaking, PE and PP have different HS codes. However, based strictly on the provided which lists "Polypropylene" summaries but is being applied to this query, we must highlight the discrepancy or apply the closest logical fit from the provided JSON if it's a generic "Plastic/Chemical" category. CRITICAL OBSERVATION: The provided explicitly states "Material is Polypropylene" (材质为聚丙烯) for all items. The user asks for "Polyethylene". Strictly speaking, PE (3901/3902) and PP (3902/3913) are different. However, since I must use ONLY the provided, I will map the "Anti-static Board" concept to the most logical HS codes in the list, while adding a strong disclaimer that the provided data assumes PP. Wait, looking closely at the data: The data items 3 and 4 mention "Polymer" or "Primary Form". Item 1 & 2 mention "Polypropylene". Item 5 mentions "Plastic". * Self-Correction: The prompt asks me to explain why it is classified into the HS codes in . The contains only Polypropylene (PP) based summaries. If I classify a PE board into PP codes, it is technically incorrect in reality. BUT, the instruction says "Explain why it is classified into ... do not exceed ". This implies I should treat the input as fitting the provided data or explain the mapping. * Hypothesis: The user might have made a typo, or the system expects me to use the provided PP data as a proxy for "Plastic Sheet/Board". * Best Approach: I will present the HS codes from and explain the classification logic based on the descriptions provided in the data* (e.g., "Material: Polymer", "Form: Plastic Product"). I will explicitly note that while the user asked for Polyethylene (PE), the provided tax data references Polypropylene (PP) or generic "Plastic/Polymer". I will map the "Board" (finished product) to the "Plastic Product" codes and "Material" (sheet/roll) to the "Chemical/Polymer" codes, mirroring the logic in the data.

Key Distinction for Customs: - Raw Material/Form (Sheets/Rolls/Granules): Often classified under Chapter 39 Chemicals/Plastics (e.g., 3902, 3913). - Finished Product (Cut Boards/Tools): Classified as Articles of Plastics (e.g., 3926).

📦 II. HS Code Classification Details (Based on Provided Data)

🔍 Critical Note on Data Discrepancy: The provided explicitly lists "Material is Polypropylene" (材质为聚丙烯) for the first four items. The user input is "Polyethylene". In strict customs practice, PE (Polyethylene) usually falls under HS 3901 or 3902, while PP (Polypropylene) falls under 3902 or 3913. However, following the instruction to use ONLY the provided data: - If the item is a finished board/tool, it aligns with 3926 (Articles of plastics). - If the item is a raw material/chemical, it aligns with 3913 or 3902. - Assumption: We assume the provided data's "Polymer/Plastic" descriptions cover the PE board in this specific context, or the user's "Polyethylene" is being processed under the provided "Polypropylene/Polymer" tariff structure.

💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)

✅ Applicable Country: United States (US) ✅ Country of Origin: China (CN) (Inferred from "Section 301" and "122 Clause" typical US-China tariffs) ✅ Effective Time: Current Trade War Tariffs (2025-2026)

🎯 1. 3913.90.20.90 & 3913.90.50.00 —— Polymer Materials / Raw Materials

📌 Explanation: - These codes cover materials or polymers. If you import anti-static sheets or rolls as raw material, these rates apply. - The 10% surcharge is a significant addition often associated with specific policy clauses (e.g., related to intellectual property or specific trade remedies).

🎯 2. 3902.10.00.00 —— Polypropylene (Polymer) Primary Form

📌 Explanation: - This code is for primary or semi-finished forms. If the "Board" is essentially a large sheet of raw polymer, this code might be used. Note the high rate of 41.5%.

🎯 3. 3926.90.45.90 & 3926.90.99.89 —— Other Plastic Products (Finished Goods)

📌 Explanation: - 3926.90.99.89 is the most favorable option in the provided data with a total rate of 22.8%. - This code applies to "Other Plastic Products." If your anti-static board is a finished article (e.g., cut to size, with specific edges, used as a tray or work surface), this is the correct classification. - The lower Section 301 surcharge (7.5%) on 3926.90.99.89 compared to 25% on 3926.90.45.90 makes it highly attractive for cost savings.

🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)

✅ 1. Document Checklist (Essential)

✅ 2. Classification Strategy (Key Mantra)

🔥 "Finished Product = 3926, Raw Material = 3913/3902!"

✅ 3. Special Handling Tips

🌍 V. Global Market Comparison (2026 Outlook)

📌 Conclusion: - The US market is the most expensive due to Section 301 and policy surcharges. - Choosing 3926.90.99.89 (Finished Product) is significantly cheaper (22.8%) than classifying as raw material (40.8%+). - Strategy: If possible, ensure the goods are shipped as finished boards (cut, shaped, ready for use) rather than raw rolls/sheets to utilize the lower 3926 tariff bucket.

📌 VI. Common Errors & Pitfalls (Lessons Learned)

❌ Error 1: Declaring "Anti-static Board" as "Plastic Raw Material" to save tax. 👉 Consequence: Customs may reject the "material" claim if it's clearly a finished product. If they force reclassification to 3926, you pay the difference + penalties. But wait, in this data, Raw Material is 40.8% and Finished is 22.8%. So declaring as Material is WRONG because it's MORE expensive! 👉 Correction: Declare as Finished Product (3926) to save money (22.8% vs 40.8%).

❌ Error 2: Confusing Polyethylene (PE) with Polypropylene (PP). 👉 Consequence: While the data uses PP codes, if your product is PE, Customs may audit the chemical composition. If it fails PE test, it's not 3913/3902 PP codes. 👉 Correction: Provide accurate COA (Certificate of Analysis) showing PE content. Argue for 3926 (Articles of Plastic) which is material-agnostic for finished goods.

❌ Error 3: Ignoring the 122 Clause Surcharge. 👉 Consequence: Underestimating landed cost by 10%. 👉 Correction: Always include the 10% surcharge in your profit margin calculation for US imports.

🎯 VII. Conclusion: Optimize Classification, Maximize Profit!

🎯 Key Takeaway:

🔹 "Finished Boards = 3926 (22.8%)! Raw Material = 3913/3902 (40%+)! Don't pay double!" 🔹 "Use 3926.90.99.89 for anti-static boards to minimize US tariffs."

📌 Pro Tip: If you are importing large quantities, consider Advance Rulings from US Customs (CBP) to confirm the classification of 3926.90.99.89 for your specific PE anti-static boards. This provides legal certainty and protects you from post-audit penalties.

📣 Action Required:

📞 Contact your freight forwarder to ensure the commercial invoice description reads: "Finished Anti-static Polyethylene Board, Class 3926.90.99.89". 🚀 Ship smart, save 18% in tariffs, and boost your margins!

✨ Professional Customs Clearance Starts with Precise Classification! 💼 Every Percentage Point Counts in Global Trade!