Polypropylene Product Raw Material
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3902100000 | 41.5% | CN | US | Official Doc |
| 3902900050 | 41.5% | CN | US | Official Doc |
| 3915900090 | 35.0% | CN | US | Official Doc |
| 3926909989 | 22.8% | CN | US | Official Doc |
Product Images
AI Analysis
π Polypropylene Product Raw Material β HS Code & Tariff Guide 2026 | Expert Customs Clearance Strategy
π HS Code Reference & Customs Clearance Blueprint | 2026 Updated Tariff Analysis | Pro-Level Import Planning
π¦ δΈγProduct Definition & Classification: What Exactly Is "Polypropylene Raw Material"?
Polypropylene (PP) raw material refers to primary form plastic materials derived from propylene monomers, used as feedstock for manufacturing sheets, films, woven fabrics, and other plastic products. In international trade, these materials are classified based on:
- Chemical composition (e.g., polypropylene, propylene polymer)
- Physical form (e.g., primary form, sheet, woven fabric, waste/scraps)
- End-use logic (e.g., whether it qualifies as non-PET plastic waste or industrial raw material)
β οΈ Critical Distinction: - Primary form (granules, pellets, powder) β High tariff due to direct industrial use
- Sheet, film, or fabric form β May qualify for lower or different tariff treatment
- Waste/scraps (non-PET) β Often subject to different rules under environmental or recycling regulations
π δΊγHS Code Classification Breakdown (2026 Official Tariff Table)
| HS Code | Product Description | Form & Material | Key Classification Logic |
|---|---|---|---|
3902.10.00.00 |
Polypropylene sheet/raw material, woven fabric raw material, stretch film raw material | Polypropylene, primary form | Raw material for plastic sheets, fabrics, films |
3902.90.00.50 |
Polypropylene sheet raw material, propylene polymer, primary form | Polypropylene, primary form | Non-specific PP raw material, not covered under 3902.10 |
3915.90.00.90 |
Polypropylene sheet raw material, other plastics, non-PET plastic waste/scraps | Sheet form, waste/scraps | Falls under "other plastic waste/scraps" β not PET-based |
3926.90.99.89 |
Polypropylene woven fabric raw material | Raw material, plastic-based other articles | Classified under "other plastic articles" |
π Why These HS Codes? - 3902.10.00.00 & 3902.90.00.50: Both cover primary form polypropylene used in sheet/film/fabric production β High tariff due to industrial use - 3915.90.00.90: Applies when material is non-PET plastic waste/scraps β Lower base tariff but still subject to 25% + 10% add-ons - 3926.90.99.89: For woven fabric raw material not covered by other subheadings β Treated as "other plastic articles"
π° δΈγ2026 Updated Tariff Breakdown (US Market | China Origin)
β Target Country: United States (US)
β Origin: China (CN)
β Effective Date: November 10, 2025 (and onward)
π― 1. 3902.10.00.00 β Polypropylene Primary Form Raw Material
| Item | Detail |
|---|---|
| Base Tariff | 6.5% (ad valorem) |
| USITC Section 301 Additional Duty | +25.0% |
| Section 122 (IEEPA) Emergency Tariff | +10.0% |
| Total Effective Tariff | 41.5% |
| Tax Calculation | CIF Value Γ 41.5% |
| De Minimis Threshold | β Not applicable (denied) |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:3902.10.00.00 β FOOTNOTE:9903.88.01 |
π Explanation: - USITC 25%: Imposed under Section 301 of the Trade Act of 1974 β targeting unfair trade practices by China. - IEEPA 10%: Enacted under the International Emergency Economic Powers Act β applies to goods from China/Hong Kong. - Combined Total: 41.5% β one of the highest tariff tiers for industrial raw materials.
π― 2. 3902.90.00.50 β Polypropylene Sheet Raw Material (Propylene Polymer, Primary Form)
| Item | Detail |
|---|---|
| Base Tariff | 6.5% |
| USITC Section 301 Additional Duty | +25.0% |
| Section 122 (IEEPA) Emergency Tariff | +10.0% |
| Total Effective Tariff | 41.5% |
| Tax Calculation | CIF Γ 41.5% |
| De Minimis | β Not eligible |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:3902.90.00.50 β FOOTNOTE:9903.88.01 |
π Note: - Despite being "sheet" form, it's still classified as primary form β same tariff as
3902.10.00.00- No distinction made between sheet, film, or granule form if material is non-recycled and non-PET
π― 3. 3915.90.00.90 β Polypropylene Sheet Raw Material (Non-PET Plastic Waste/Scraps)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| USITC Section 301 Additional Duty | +25.0% |
| Section 122 (IEEPA) Emergency Tariff | +10.0% |
| Total Effective Tariff | 35.0% |
| Tax Calculation | CIF Γ 35.0% |
| De Minimis | β Not eligible |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:3915.90.00.90 β FOOTNOTE:9903.88.01 |
π Why Lower? - Base tariff is 0% because itβs classified as plastic waste/scraps under non-PET category - Still subject to 25% + 10% due to China origin and IEEPA/301 rules - Must prove itβs non-PET, non-recycled, and waste/scraps to qualify
β Key Evidence Required: - Material composition report (PP, not PET) - Certifications showing itβs post-industrial scrap, not reprocessed - Visual proof of contamination, color variation, or irregular shape
π― 4. 3926.90.99.89 β Polypropylene Woven Fabric Raw Material
| Item | Detail |
|---|---|
| Base Tariff | 5.3% |
| USITC Section 301 Additional Duty | +7.5% |
| Section 122 (IEEPA) Emergency Tariff | +10.0% |
| Total Effective Tariff | 22.8% |
| Tax Calculation | CIF Γ 22.8% |
| De Minimis | β Not eligible |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:3926.90.99.89 β FOOTNOTE:9903.88.01 |
π Why Lower Than Others? - Classified under "other plastic articles" (not raw material for sheet/film) - Lower base tariff (5.3%) and reduced 301 duty (7.5%) - Still subject to 10% IEEPA due to China origin
π Critical Note:
- Must prove itβs raw material for woven fabric, not finished product - If already woven or fabricated, it may be classified under 5903.90.00.00 β higher tariff
π οΈ εγCustoms Clearance Best Practices (Pro Tips to Avoid Penalties)
β 1. Essential Documentation (Must-Have)
| Document | Required? | Why It Matters |
|---|---|---|
| β Product Specification Sheet | βοΈ | Proves material type, form, and intended use |
| β Material Safety Data Sheet (MSDS) | βοΈ | Confirms polypropylene composition |
| β Third-Party Lab Test Report | βοΈ | Validates non-PET, non-recycled status (for 3915.90.00.90) |
| β Commercial Invoice | βοΈ | Must clearly state: βPolypropylene Raw Material, Primary Formβ |
| β Packing List | βοΈ | Shows weight, quantity, packaging type |
| β Certificate of Origin (CO) | βοΈ | Critical for tariff eligibility |
| β Photos (Raw Material & Packaging) | βοΈ | Proves form (granules vs. scrap vs. fabric) |
β 2.η³ζ₯ζε·§οΌη³ζ₯ε£θ―οΌ
π₯ βForm Matters, Waste Wins, 301 Hits, IEEPA Stays β Know Your HS Code!β
| Scenario | Correct HS Code | Common Mistake |
|---|---|---|
| Granules for film production | 3902.10.00.00 |
Misclassified as 3926.90.99.89 β lower base tariff but higher risk |
| Industrial scrap (non-PET) | 3915.90.00.90 |
Misreported as raw material β 41.5% instead of 35% |
| Woven fabric raw material | 3926.90.99.89 |
Reported as 3902.10.00.00 β 41.5% instead of 22.8% |
| Finished woven fabric | β Not allowed | Must be raw material only; otherwise, new HS Code applies |
β 3. Special Cases & Solutions
| Situation | Recommended Action |
|---|---|
| Material is recycled or reprocessed | β Cannot use 3915.90.00.90 β must use 3902.10.00.00 β 41.5% |
| Material is mixed with PET | β Cannot claim non-PET status β use 3902.10.00.00 |
| Material is post-consumer waste | β
Can qualify for 3915.90.00.90 if non-PET and properly documented |
| Exporting to US from Vietnam/Mexico | β May qualify for IEEPA exemption β 0% tariff if origin is not China |
π δΊγGlobal Market Tariff Comparison (2026)
| Country/Region | Recommended HS Code | Base Tariff | Additional Duties | Total Tariff | Notes |
|---|---|---|---|---|---|
| πΊπΈ USA (China origin) | 3902.10.00.00 |
6.5% | +25% +10% | 41.5% | High-risk; no de minimis |
| π¨π³ China | 3902.10.00.00 |
5% | None | 5% | No extra tariffs |
| πͺπΊ EU | 3902.10.00.00 |
0% | None | 0% | CE certified |
| π¦πΊ Australia | 3902.10.00.00 |
5% | None | 5% | RCM required |
| π―π΅ Japan | 3902.10.00.00 |
0% | None | 0% | PSE required |
π Insight:
- USA is the only market with 301 + IEEPA double taxation on PP raw materials from China
- China, EU, Japan, Australia offer much lower tariffs β consider shifting production or re-routing
π¨ ε γCommon Mistakes & Risk Alerts (Avoid These!)
β Mistake 1: Using 3915.90.00.90 for recycled or reprocessed PP
π Result: Rejected by USCB, penalty, seizure, back taxes
β Mistake 2: Misclassifying woven fabric raw material as 3902.10.00.00
π Result: Paying 41.5% instead of 22.8% β loss of 18.7% margin
β Mistake 3: Not providing lab test report for waste/scraps
π Result: Customs denies non-PET status β 41.5% tariff applied
β Mistake 4: Failing to declare origin correctly
π Result: Automatic application of 301 + IEEPA tariffs even if material is from Vietnam
β Correct Approach:
βPolypropylene Primary Form Raw Material, Granules, 100% PP, Non-PET, Non-Recycled, For Film & Woven Fabric Production, Origin: China (CN), CO Issuedβ
π― δΈγFinal Verdict: Precision Matters, Tariff is King!
π― Key Takeaways:
πΉ Form determines tariff β granules vs. scrap vs. fabric β huge difference
πΉ Non-PET waste can save 6.5% in base tariff β but only if proven
πΉ Woven fabric raw material is cheaper to import (22.8%) than sheet/film (41.5%)
πΉ China-origin PP raw material faces 41.5% in US β extremely high cost
π Pro Tip:
π Apply for an Advance Ruling (Pre-Clearance) before shipment
π Work with a US customs broker experienced in 301/IEEPA cases
π Consider shifting production to Vietnam, Mexico, or Malaysia to avoid 301/IEEPA tariffs
π£ Act Now!
π Contact a certified customs broker + submit product photos + request HS Code pre-ruling
πΌ Your PP raw material shipment can be cleared faster, cheaper, and risk-free
β¨ Smart Importing Starts with Smart Classification!
πΌ One wrong HS Code = 41.5% extra cost. Get it right the first time.
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.