Polyvinyl Chloride Resin Powder for Paints
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3904210000 | 41.5% | CN | US | Official Doc |
| 3904100000 | 41.5% | CN | US | Official Doc |
| 3208900000 | 38.2% | CN | US | Official Doc |
Product Images
AI Analysis
🎨 Polyvinyl Chloride Resin Powder for Paints (涂料用聚氯乙烯树脂粉末)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Strategic Compliance Strategy
📌 I. Product Definition & Classification: What is "PVC Resin Powder for Paints"?
Polyvinyl Chloride (PVC) Resin Powder is a synthetic polymer widely used in the coating and paint industry as a binder or film-forming agent. Unlike PVC used for pipes or profiles (which is often "plasticized" for flexibility), the PVC resin used in paints and coatings typically falls under the category of non-plasticized PVC or is formulated specifically for liquid coating applications.
In international trade, this product can be classified into three distinct HS Codes depending on its chemical state, processing level, and intended application logic:
- Raw Material Status: If it is considered a primary, unprocessed polymer form (even if meant for paints), it falls under the "Primary Forms" chapter.
- Specific Polymer Type: If classified by its specific chemical composition as non-plasticized PVC powder, it has a dedicated subheading.
- Application-Based: If the classification authority views the product primarily as a component of a paint mixture or adheres to the "paint/coating" logic due to its specific formulation for surface application, it may be classified under Chapter 32.
⚠️ Key Classification Distinction:
- If the product is strictly raw PVC powder without significant modification for paint formulation -> Look at 3904 or 3904.10.
- If the product is considered a paint component or specifically declared for paint application with specific chemical properties -> Look at 3208.90.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Logic | Tax Rate (Total) |
|---|---|---|---|
3904.21.00.00 |
PVC Resin Powder (Paint Use): Non-plasticized PVC范畴 (Non-plasticized PVC scope). | Classified by material type (Non-plasticized PVC). | 41.5% |
3904.10.00.00 |
PVC Resin Powder (Paint Use): Primary Form / Raw Material. | Classified as "Primary Forms" of polymers. | 41.5% |
3208.90.00.00 |
PVC Resin Powder (Paint Use): Synthetic Polymer for Paints. | Classified by end-use (Paints/Varnishes logic). | 38.2% |
🔍 Critical Note:
- 3904.21.00.00 and 3904.10.00.00 share the same total tax rate of 41.5%. The distinction lies in whether the customs authority views the product as a "Non-plasticized PVC" (3904.21) or a "Primary Form" (3904.10). Both are subject to the same heavy tariffs. - 3208.90.00.00 offers a slightly lower total rate of 38.2%. This classification hinges on the argument that the resin is specifically prepared for use in paints, falling under Chapter 32 (Paints, Varnishes, etc.).
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Duties & Policy Surcharges)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: November 10, 2025 (Including subsequent imports)
🎯 1. 3904.21.00.00 —— PVC Resin Powder (Non-Plasticized)
| Item | Content |
|---|---|
| Base Tariff | 6.5% (ad valorem) |
| Section 301 Surcharge | +25.0% |
| Section 122 Surcharge | +10.0% |
| Total Tax Rate | 41.5% |
| Tax Calculation | CIF Value × 41.5% |
| De Minimis Exemption | ❌ Not Eligible (deny_de_minimis) |
| Legal Path | Base Tariff → Section 301 → Section 122 |
📌 Explanation:
- Base Tariff (6.5%): The standard MFN rate for PVC resins.
- Section 301 (25%): Additional tariffs imposed under US Trade Law Section 301 against Chinese goods.
- Section 122 (10%): Additional tariffs under Section 122 of the Trade Expansion Act (often applied to steel/aluminum, but here specified in the data for this HS code).
- Total 41.5%: A very high combined rate. Cost calculation must account for all three components.
🎯 2. 3904.10.00.00 —— PVC Resin Powder (Primary Form)
| Item | Content |
|---|---|
| Base Tariff | 6.5% |
| Section 301 Surcharge | +25.0% |
| Section 122 Surcharge | +10.0% |
| Total Tax Rate | 41.5% |
| Tax Calculation | CIF Value × 41.5% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Path | Base Tariff → Section 301 → Section 122 |
📌 Note:
- Identical tax structure to 3904.21.00.00.
- The choice between 3904.10 and 3904.21 depends on technical documentation (e.g., MSDS, chemical structure certificates).
- Risk: If misclassified, you face both underpayment penalties and delayed customs clearance.
🎯 3. 3208.90.00.00 —— Paint Components (Synthetic Polymers)
| Item | Content |
|---|---|
| Base Tariff | 3.2% |
| Section 301 Surcharge | +25.0% |
| Section 122 Surcharge | +10.0% |
| Total Tax Rate | 38.2% |
| Tax Calculation | CIF Value × 38.2% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Path | Base Tariff → Section 301 → Section 122 |
📌 Advantage:
- Lower Base Tariff (3.2%): Compared to 6.5% for PVC resins.
- Total Savings: 3.3% less than the PVC classifications (41.5% - 38.2% = 3.3%).
- Justification: Requires strong evidence that the product is primarily used in paint manufacturing or is a finished paint ingredient, not just raw PVC resin.
🛠️ IV. Customs Clearance Practical Advice (实战避坑指南)
✅ 1. Documentation Checklist (Essential)
| Document | Required | Purpose |
|---|---|---|
| ✅ MSDS (Material Safety Data Sheet) | ✔️ | To prove chemical composition and state (powder vs. liquid). |
| ✅ Technical Data Sheet (TDS) | ✔️ | To clarify "Non-Plasticized" status or "Paint-Grade" formulation. |
| ✅ Certificate of Analysis (COA) | ✔️ | To confirm polymer grade and resin properties. |
| ✅ Commercial Invoice | ✔️ | Must clearly state: "PVC Resin Powder for Paints" and HS Code. |
| ✅ Bill of Lading (B/L) | ✔️ | Consistent with invoice description. |
| ✅ Country of Origin Certificate | ✔️ | To confirm Chinese origin (triggering 301/122 tariffs). |
✅ 2. Declaration Strategy (Key Tactics)
🔥 "Material vs. Application: Choose Wisely!"
| Scenario | Recommended HS Code | Reason |
|---|---|---|
| Raw PVC Powder (General grade) | 3904.21.00.00 or 3904.10.00.00 |
Safest if product is standard PVC resin. |
| Specialty Paint-Grade PVC | 3208.90.00.00 |
If you can prove it is specifically formulated for paints (lower tax!). |
| PVC Pellets/Granules | ❌ Avoid 3208 | Usually classified under Chapter 39. |
⚠️ Warning:
- Declaring PVC Resin as3208.90.00.00requires strong technical justification. If customs audits and finds it is standard PVC resin, they will reclassify it to 3904, assess the higher tax, and impose penalties.
- Do not split shipments to avoid high tariffs; customs tracks patterns.
✅ 3. Special Circumstances
| Situation | Advice |
|---|---|
| OEM Custom Resin | Provide client specifications showing paint application. |
| Mixed Shipment | Separate PVC resin from other goods to avoid classification confusion. |
| Small Sample Shipments | No De Minimis Exemption applies! Even small packages are subject to full tariffs. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Total Tariff (China Origin) | Key Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3904.21.00.00 or 3208.90.00.00 |
41.5% or 38.2% | No specific US certification, but MSDS required | High tariffs due to 301/122. |
| 🇨🇳 China | 3904.21.00.00 |
~5-6% | GB Standards | Low import duty. |
| 🇪🇺 EU | 3904.21.00.00 |
~0-6.5% | REACH Registration | REACH compliance is critical. |
| 🇬🇧 UK | 3904.21.00.00 |
~0-6.5% | UK REACH | Post-BREXIT rules apply. |
📌 Conclusion:
- USA is the most challenging market due to the 38.2%-41.5% total tariff.
- EU requires REACH registration for PVC resins, which is a significant compliance hurdle but not a tariff issue.
- China has low duties but strict quality standards.
📌 VI. Common Mistakes & Pitfalls (Blood-Learning Lessons)
❌ Mistake 1: Declaring PVC Resin as "Plastic Parts"
👉 Consequence: Classification error → Penalty + Retroactive Tariffs.
❌ Mistake 2: Ignoring Section 122 Tariffs
👉 Consequence: Underestimating costs by 10% → Profit margin erosion.
❌ Mistake 3: Assuming De Minimis Exemption for Samples
👉 Consequence: Small packages seized or taxed at full rate → Delayed delivery.
❌ Mistake 4: Using "Chemical Raw Material" as generic description
👉 Consequence: Customs request for more info → Clearance delay.
✅ Correct Description:
"PVC Resin Powder, Non-Plasticized, Polymer Grade, For Paint Manufacturing, HS Code 3904.21.00.00, Origin: China"
🎯 VII. Conclusion: Precision in Classification Saves Money!
🎯 Remember:
🔹 "Raw PVC = 3904 (41.5%) vs. Paint-Grade = 3208 (38.2%)"
🔹 "Every percentage point matters in the US market!"
🔹 "301 + 122 = High Cost, Plan Ahead!"
📌 Pro Tip:
If you are importing large volumes, consider:
1. Advance Ruling: Apply for a binding ruling from US Customs to confirm HS Code.
2. Supply Chain Adjustment: Explore sourcing from non-China origins (e.g., Southeast Asia) to avoid 301/122 tariffs, if feasible.
3. Cost-Benefit Analysis: Calculate if the 3.3% savings from 3208.90.00.00 outweighs the compliance risk.
📣 Immediate Action:
📞 Consult a Customs Broker: Verify HS Code with technical documents.
📄 Prepare MSDS & TDS: Have these ready for inspection.
💰 Factor in 41.5%: Include full tariff in your landed cost calculation.
✨ Professional Clearance Starts with Accurate Classification!
💼 Your Cost Efficiency Depends on the Right HS Code!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.