Reinforced Rubber Hose with Accessories
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4009210050 | 0.0% | CN | US | Official Doc |
| 4009320050 | 37.5% | CN | US | Official Doc |
| 3917290050 | 38.1% | CN | US | Official Doc |
| 3917390010 | 38.1% | CN | US | Official Doc |
AI Analysis
π Reinforced Rubber Hose with Accessories: HS Code Classification & Customs Clearance Guide 2026
π HS Code Reference & Customs Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: Do You Really Understand "Reinforced Rubber Hoses"?
Reinforced rubber hoses are critical components in industrial, automotive, hydraulic, and pneumatic systems. In international trade, they are classified based on material composition, reinforcement type, and presence of fittings.
The key distinction lies in the reinforcing material: - Textile-Reinforced: Hoses strengthened with fabric, yarn, or similar textile materials. - Metal-Reinforced: Hoses strengthened with metal wires, cords, or other metallic structures. - Unreinforced or Other: Hoses without specific reinforcement or combined with non-textile, non-metal materials (less common for high-pressure applications).
β οΈ Key Distinction:
- If the hose is reinforced only with textile materials βε½ε ₯ 4009.22.00.50
- If the hose is reinforced only with metal β ε½ε ₯ 4009.21.00.50 / 4009.32.00.50 (depending on further sub-classification)
- Plastic hoses are classified under Chapter 39, not Chapter 40.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Reinforcement Type | With Fittings? | Tax Status |
|---|---|---|---|---|
4009.21.00.50 |
Tubes, pipes and hoses, of vulcanized rubber other than hard rubber: Reinforced or otherwise combined only with metal: With fittings | Metal | β Yes | β Tax Info Failed |
4009.22.00.50 |
Tubes, pipes and hoses, of vulcanized rubber other than hard rubber: Reinforced or otherwise combined only with textile materials: With fittings | Textile | β Yes | β Tax Info Failed |
4009.32.00.50 |
Tubes, pipes and hoses, of vulcanized rubber other than hard rubber: Reinforced or otherwise combined only with textile materials: With fittings | Textile | β Yes | β 0.0% |
3917.29.00.50 |
Tubes, pipes and hoses, of plastics: Rigid tubes, pipes and hoses, of other plastics < 200 mm in length | Plastic (Rigid) | β No fittings specified | β 0.0% |
3917.39.00.10 |
Tubes, pipes and hoses, of plastics: Other tubes, pipes and hoses: Reinforced with metal | Plastic (Reinforced with Metal) | β No fittings specified | β 28.1% |
π Important Note:
- Chapter 40 covers rubber hoses.
- Chapter 39 covers plastic hoses.
- Misclassification between rubber and plastic, or between textile and metal reinforcement, can lead to significant tax discrepancies or customs delays.
- "With fittings" is a critical descriptor. If the hose comes with elbows, joints, or flanges, it must be declared as such.
π° III. 2026 Latest Tariff Rate Details (Including Surcharge Taxes)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: November 10, 2025 (and subsequent imports)
π― 1. 4009.21.00.50 & 4009.22.00.50 ββ Rubber Hoses, Reinforced (Metal/Textile) with Fittings
| Item | Content |
|---|---|
| Base Tax Rate | Information failed to retrieve |
| USITC Surcharge | Information failed to retrieve |
| IEEPA Surcharge | Information failed to retrieve |
| Total Tax | Error |
| Tax Calculation | N/A due to data retrieval failure |
| De Minimis Eligibility | β Not Eligible (High-risk classification) |
| Legal Basis Path | N/A |
π Explanation:
- The system failed to retrieve specific tax details for these HS codes.
- This is a high-risk area for misclassification.
- Recommendation: Contact customs broker or apply for Advance Ruling to confirm actual tax burden.
π― 2. 4009.32.00.50 ββ Rubber Hoses, Reinforced with Textile, With Fittings
| Item | Content |
|---|---|
| Base Tax Rate | 0.0% |
| USITC Surcharge | 0.0% |
| IEEPA Surcharge | 0.0% |
| Total Tax | 0.0% |
| Tax Calculation | CIF Γ 0% = $0 |
| De Minimis Eligibility | β Potentially Eligible (if value < $800) |
| Legal Basis Path | HTSUS:4009.32.00.50 |
π Note:
- This code benefits from zero tariffs.
- Ensure the hose is reinforced only with textile materials (e.g., nylon, polyester fabric).
- Must include fittings (joints, elbows, flanges) as described in the HS definition.
π― 3. 3917.29.00.50 ββ Plastic Hoses, Rigid, < 200 mm, Other Plastics
| Item | Content |
|---|---|
| Base Tax Rate | 0.0% |
| USITC Surcharge | 0.0% |
| IEEPA Surcharge | 0.0% |
| Total Tax | 0.0% |
| Tax Calculation | CIF Γ 0% = $0 |
| De Minimis Eligibility | β Potentially Eligible |
| Legal Basis Path | HTSUS:3917.29.00.50 |
π Note:
- Applies to rigid plastic hoses shorter than 200mm.
- Not applicable to flexible rubber or long hoses.
π― 4. 3917.39.00.10 ββ Plastic Hoses, Reinforced with Metal
| Item | Content |
|---|---|
| Base Tax Rate | 3.1% |
| USITC Surcharge | 25.0% |
| IEEPA Surcharge | Not specified (but likely included in total) |
| Total Tax | 28.1% |
| Tax Calculation | CIF Γ 28.1% |
| De Minimis Eligibility | β Not Eligible (High tax burden) |
| Legal Basis Path | USITC:3917.39.00.10, USITC Footnote 301 |
π Warning:
- This is a high-tax item due to 301 tariffs on plastic goods reinforced with metal.
- Do not misdeclare as rubber hose (4009series) to avoid evasion charges.
π οΈ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance)
β 1. Document Checklist (Mandatory)
| Document | Required? | Notes |
|---|---|---|
| β Product Specification Sheet | βοΈ | Include material (rubber vs. plastic), reinforcement type (textile vs. metal), diameter, pressure rating |
| β Photos of Hose & Fittings | βοΈ | Clear shots showing reinforcement layers, fittings (elbows, flanges), and labeling |
| β Commercial Invoice | βοΈ | Must explicitly state: "Reinforced Rubber/Plastic Hose with Fittings" |
| β Packing List | βοΈ | Detail contents: hose length, number of fittings, material breakdown |
| β Certificate of Origin (CO) | βοΈ | For potential duty preferences (if applicable) |
| β Third-Party Test Report | βοΈ | Pressure test, material composition analysis |
β 2. Declaration Tips (Key Mantra)
π₯ βMaterial First, Reinforcement Second, Fittings Third!β
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Rubber hose, textile-reinforced, with fittings | 4009.32.00.50 |
Declare as plastic β 28.1% tax |
| Plastic hose, metal-reinforced | 3917.39.00.10 |
Declare as rubber β 0% tax (evasion risk) |
| Rubber hose, no fittings | Check 4009.1x or 4009.4x |
Declare as "with fittings" β Wrong HTS |
| Rigid plastic hose < 200mm | 3917.29.00.50 |
Declare as flexible β Misclassification |
β 3. Special Cases Handling
| Scenario | Handling Advice |
|---|---|
| Hydraulic Hose Assemblies | Must include pressure rating and end-fitting type (JIC, SAE, etc.) |
| Custom-Length Cuts | Declare as "cut to length" with total linear feet/meters |
| Mixed Shipments (Rubber + Plastic) | Separate lines on invoice. Do not combine. |
| OEM Custom Hoses | Provide clientβs technical drawing to prove reinforcement type |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 4009.32.00.50 (Textile/Rubber) |
0.0% | None specific | 3917.39.00.10 (Plastic/Metal) = 28.1% |
| π¨π³ China | 4009.32.00.50 |
Low/Zero | CCC (if applicable) | Domestic production common |
| πͺπΊ EU | 4009.32.00.50 |
~0-4% | CE (if mechanical equipment) | No 301-style tariffs |
| π¬π§ UK | 4009.32.00.50 |
~0-4% | UKCA | Post-Brexit rules apply |
| π¦πΊ Australia | 4009.32.00.50 |
~5% | RCM | No major surcharges |
π Conclusion:
- USA has the most complex tariff structure due to Section 301.
- Plastic hoses with metal reinforcement are heavily taxed in the US.
- Rubber hoses with textile reinforcement are tariff-free in the US.
- Misclassification can result in 28.1% unexpected tax + penalties.
π VI. Common Mistakes & Pitfalls (Lessons Learned)
β Mistake 1: Declaring "Plastic Hose with Metal Reinforcement" as "Rubber Hose"
π Consequence: Accused of tariff evasion. Fines + 28.1% back-taxes.
β Mistake 2: Ignoring "With Fittings" in description
π Consequence: Customs may reclassify under wrong subheading, causing delays.
β Mistake 3: Combining Rubber and Plastic hoses in one line item
π Consequence: Rejection of entry. Must split by material.
β Mistake 4: Not specifying Reinforcement Type
π Consequence: Customs asks for clarification β Delay + storage fees.
β Correct Declaration Example:
"VULCANIZED RUBBER HOSE, REINFORCED WITH NYLON TEXTILE, 1/2 INCH DIAMETER, 10 METER LENGTH, WITH BRASS ELBOW FITTINGS, MODEL XYZ, PRESSURE RATING 150 PSI"
π― VII. Conclusion: Precise Classification Saves Money!
π― Remember the Mantra:
πΉ βRubber + Textile = 0%β
πΉ βPlastic + Metal = 28.1%β
πΉ βMisdeclare = Penalty + Delayβ
πΉ βHS Code is King, Description is Queen!β
π Pro Tip:
- If your hoses are originating from Vietnam, Mexico, or Thailand, you may qualify for preferential tariffs under USMCA or FTAs.
- Always verify the HS Code with a licensed customs broker before shipment.
- Consider applying for a Bind Ruling from CBP if uncertain about classification.
π£ Act Now:
π Contact Customs Broker + Provide Product Specs + Verify HS Code
π Ensure smooth clearance, avoid surprises, protect margins!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Every Dollar Saved is a Dollar Earned!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.