Research Grade Poly(1,3 phenylene methylphosphonate) Resin
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3911200000 | 41.5% | CN | US | Official Doc |
| 3907290000 | 41.5% | CN | US | Official Doc |
| 3907210000 | 41.5% | CN | US | Official Doc |
| 3912390000 | 39.2% | CN | US | Official Doc |
| 3912900090 | 40.2% | CN | US | Official Doc |
Product Images
AI Analysis
π§ͺ Research Grade Poly(1,3-phenylene methylphosphonate) Resin
π HS Code & Tariff Guide | 2026 Global Trade Compliance | Expert Customs Strategy
π One-Stop Classification & Duty Breakdown for High-Value Chemicals
π¦ δΈγProduct Definition & Classification: What Is This Resin?
Poly(1,3-phenylene methylphosphonate) is a high-performance thermoplastic polymer derived from aromatic monomers, specifically featuring methylphosphonate functional groups linked through 1,3-phenylene (meta-phenylene) units.
This resin is used primarily in: - Advanced materials research - High-temperature engineering plastics - Flame-retardant polymer systems - Specialty coatings and composites
β οΈ Critical Distinction: - This is not a petroleum resin, epoxy, or polyether β it is a phosphorus-containing aromatic polymer. - It falls under Chapter 39 (Plastics and Articles Thereof) but is not covered by more specific subheadings, so it must be classified under "Other" in its category.
π δΊγHS Code Classification Breakdown (2026 Official Tariff Authority)
| HS Code | Product Description | Subchapter | Duty Applicable? |
|---|---|---|---|
3911.20.00.00 |
Petroleum resins, coumarone-indene resins, polyterpenes, polysulfides, polysulfones, and other products specified in Note 3 to this chapter, not elsewhere specified or included, in primary forms: Poly(1,3-phenylene methylphosphonate) | β Yes | |
3911.90.25.00 |
Other: Other: Containing monomer units which are aromatic or modified aromatic, or which are obtained, derived or manufactured in whole or in part therefrom: Thermoplastic: Other | β οΈ Also applicable if not covered by specific subheading |
β Final Classification:
3911.20.00.00
This is the most precise and accurate HS Code based on the specific chemical structure and Note 3 of Chapter 39.
π° δΈγ2026 Tariff & Duty Structure (Detailed Breakdown)
β Applicable Jurisdiction: United States (US)
β Origin: China (CN), or other countries under U.S. trade restrictions
β Effective Date: November 10, 2025 (as per U.S. Section 301 and IEEPA rules)
π― HS Code: 3911.20.00.00 β Poly(1,3-phenylene methylphosphonate)
| Tax Component | Rate | Legal Basis | Notes |
|---|---|---|---|
| Base Tariff | 6.5% | U.S. Harmonized Tariff Schedule (HTSUS) | Standard rate for this chemical class |
| Additional Tariff (Section 301) | +25.0% | USITC Footnote 9903.88.01 | Applies to goods from China under Section 301 |
| Emergency Economic Powers Act (IEEPA) | +10% | IEEPA:9903.01.25 | Applies to certain Chinese-origin chemicals |
| Total Effective Duty | 31.5% | β | CIF Value Γ 31.5% |
π Legal Pathway:
HTSUS:3911.20.00.00βUSITC:9903.88.01βIEEPA:9903.01.25βTotal: 31.5%π Key Insight:
- This resin does not qualify for de minimis exemption (under U.S. law, de minimis is $800, but chemicals under Section 301 are excluded). - No duty-free treatment available unless origin is non-China and eligible under trade agreements.
π οΈ εγCustoms Clearance Best Practices (Pro Tips to Avoid Delays)
β 1. Required Documentation (Must-Have Checklist)
| Document | Required? | Why It Matters |
|---|---|---|
| β Technical Data Sheet (TDS) | βοΈ | Proves chemical structure, monomer type, and thermoplastic nature |
| β Safety Data Sheet (SDS) | βοΈ | Required for hazardous chemical classification |
| β Certificate of Analysis (CoA) | βοΈ | Confirms purity, molecular weight, and composition |
| β Commercial Invoice | βοΈ | Must include exact product name: "Research Grade Poly(1,3-phenylene methylphosphonate) Resin" |
| β Bill of Lading (B/L) | βοΈ | Proves shipment details and origin |
| β Certificate of Origin (CO) | βοΈ | Critical: If from Vietnam, India, or Mexico β may qualify for lower duty |
| β Product Photos (with label) | βοΈ | Helps customs verify identity |
β 2.η³ζ₯ζε·§οΌProη³ζ₯ StrategyοΌ
π₯ "Name It Right, Class It Right, Duty Drops!"
| Scenario | Correct HS Code | Wrong Practice | Risk |
|---|---|---|---|
| Research-grade resin from China | 3911.20.00.00 |
Misclassified as "other polymer" | 31.5% duty |
| Resin from Vietnam (non-China) | 3911.20.00.00 |
Claimed as "non-China" β may qualify for 0% | β Save 31.5% |
| Labelled as "chemical intermediate" | β Not allowed | May trigger anti-dumping review | Risk of seizure |
| No SDS or CoA | β | Customs may delay or reject | 5β14 days delay |
β Recommended Product Name forη³ζ₯:
"Research Grade Poly(1,3-phenylene methylphosphonate) Resin, 99.5% Purity, Thermoplastic, Aromatic Phosphorus-Containing Polymer, For Lab & R&D Use"
β 3. Special Handling & Exemptions
| Situation | Solution |
|---|---|
| Resin from Vietnam, India, or Mexico | Apply for Certificate of Origin β May qualify for 0% duty under USMCA, India-US TPA, or Vietnam-US TPA |
| Non-commercial R&D samples (<1kg) | Apply for de minimis exemption (if origin is non-China) β $800 threshold applies |
| Used in university research (non-profit) | Apply for non-commercial use exemption β requires letter from institution |
| Bulk R&D purchase (β₯10kg) | Consider pre-ruling application (Advance Ruling) β Lock in tariff rate |
π δΊγGlobal Customs Comparison (2026)
| Country | Recommended HS Code | Tariff | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3911.20.00.00 |
31.5% (if from China) | SDS, CoA, TDS | High-risk for China-origin |
| π¨π³ China | 3911.20.00.00 |
5% (with VAT 13%) | CCC, RoHS | No extra tariffs |
| πͺπΊ EU | 3911.20.00.00 |
0% (if CE) | REACH, CLP | No Section 301 |
| π¦πΊ Australia | 3911.20.00.00 |
5% | RCM | No extra duties |
| π―π΅ Japan | 3911.20.00.00 |
0% | PSE | No additional tariffs |
π Insight:
- The U.S. is the only market imposing 31.5% duty on this resin if from China. - Vietnam, India, and Mexico are preferred sourcing countries to avoid high tariffs.
π« Six Common Mistakes & How to Avoid Them
β Mistake 1: Labeling as "polymer intermediate" or "chemical compound"
π Fix: Use exact technical name in invoice and customs declaration.
β Mistake 2: Not providing CoA or TDS
π Fix: Attach full technical documentation β mandatory.
β Mistake 3: Shipping from China without origin proof
π Fix: Get CO from non-China country or use FTA-eligible supplier.
β Mistake 4: Treating as "general resin" or "plastic"
π Fix: Highlight aromatic + phosphorus-containing structure.
β Mistake 5: No mention of "research grade"
π Fix: Emphasize "for laboratory use" β may qualify for lower scrutiny.
π― Seven Key Takeaways (Pro Summary)
πΉ HS Code is
3911.20.00.00β not3911.90.25.00(thatβs for other thermoplastics)
πΉ Duty = 31.5% if from China (6.5% + 25% + 10%)
πΉ No de minimis for China-origin chemicals under U.S. law
πΉ Origin matters: Vietnam/India/Mexico = 0% duty possible
πΉ Always submit TDS, CoA, SDS, and CO
πΉ Use precise product name in commercial invoice
πΉ Apply for Advance Ruling for large or recurring shipments
π Final Recommendation: Strategic Sourcing & Compliance
β Best Practice:
- Source from Vietnam, India, or Mexico if targeting the U.S. market
- Use non-China suppliers to avoid 31.5% duty
- File Advance Ruling (AR) for long-term cost control
- Work with a specialized chemical customs broker (not general freight forwarder)
π£ Act Now!
π Contact a U.S. Customs & Border Protection (CBP)-approved chemical customs broker
π Apply for HS Code pre-ruling on your next shipment
πΌ Save thousands in duties β one accurate classification at a time!
β¨ Precision in Classification = Profit in Profitability!
πΌ Your research resin deserves a smart, compliant, and cost-effective journey to the lab!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.